Modelling of a novel in-pipe microrobot design with IPMC legs

Abstract

The majority of research activities on microrobotics have been devoted to fabrication and design. The lack of work on modelling and simulation is significant. The majority of microrobots are in-pipe microrobots. This paper presents a new in-pipe microrobot taking advantage of ionic polymer—metal composite (IPMC) actuators. The design and modelling of the robot is presented in this paper. The mathematical model of the microrobot is obtained using the extended Hamilton principle (EHP). Four steps are taken for the robot in every movement cycle. The modelling process has to be carried out for each step separately. The non-linearity of IPMC and the type of motion gait increases the complexity of the model. The main aim is to design the parameters such that the speed of progress is increased. The modelling results show that the body mass does not affect the motion speed. They also reveal that by increasing the foot angle and reducing the spring stiffness, the speed of motion will increase as well.

Keywords

ionic polymer—metal composites (IPMC)in-pipe robot microrobot robotics design modelling

Get full access to this article

View all access options for this article.

References

Iwashina

Hayashi

Iwatsuki

Nakamura

, ‘Development of in-pipe operation microrobots.’ In Proceedings of the 5th International Symposium on Micro machine and human science, Nagoya, 2–4 October 1994, pp. 41–45.

Anthierens

Bétemps

, ‘Control design of an electro pneumatic micro actuator for a mobile in-pipe micro robot.’ In Proceedings of the 5th Franco-Japanese Congress & 3rd European-Asian Congress, Mecatronics'01, Besancon, 9–11 October 2001, pp. 360–365.

Thomann

Bétemps

Redarce

, ‘The design of a new type of micro robot for the intestinal inspection.’ In Proceedings of the IEEE/RSJ International Conference on Intelligent robots and systems, Switzerland, 30 September-5 October 2002, pp. 1385–1390.

Guo

Pan

Khamesee

M. B.

, ‘Development of a novel type of microrobot for biomedical application.’ Microsystems Technol. 14 (N3) (2008): 307–314.

, ‘A bio-mimetic pipe crawling microrobot driven based on self-excited vibration.’ In Proceedings of the IEEE International Conference on Robotics and biomimetics, Sanya, 15–18 December 2007, pp. 984–988.

Bar-Cohen

, Electroactive polymer (EAP) actuators as artificial muscles-reality, potential and challenges (SPIE Press, Washington 2004).

Shahinpoor

Kim

K. J.

, ‘Ionic polymer-metal composites: I. Fundamentals.’ Int. J. Smart Mater. Structs 10 (2002): 819–833.

Lee

Kim

K. J.

Park

, ‘Modeling and experiment of a muscle-like linear actuator using an ionic polymer metal composite and its actuation characteristics.’ Int. J. Smart Mater. Structs 16 (2002): 583–588.

Yun

Kim

W. J.

, ‘System identification and microposition control of ionic polymer metal composite for three-finger gripper manipulation.’ Proc. IMechE, Part I: J. Systems and Control Engineering 220 (7) (2006): 539–551 DOI: 10.1243/09596518JSCE215.

10.

Lee

S. J.

Han

M. J.

Kim

S. J.

Jho

J. Y.

Lee

H. Y.

Kim

Y. H.

, ‘A new fabrication method for IPMC actuators and application to artificial fingers.’ Int. J. Smart Mater. Structs 15 (2002): 1217–1224.

11.

Tadokoro

Murakami

Fuji

Kanno

Hattori

Takamori

, ‘An elliptic friction drive element using an ICPF actuator.’ In Proceedings of IEEE International Conference on Robotics and automation, Minneapolis, 22–28 April 1996, pp. 205–212.

12.

Kim

Ryu

Jeong

Tak

Kim

Park

, ‘A ciliary based 8-legged walking micro robot using cast IPMC actuators.’ In Proceedings of the IEEE International Conference on Robotics and automation, Taiwan, 14–19 September 2003, pp. 2940–2945.

13.

Guo

Shi

Asaka

, ‘IPMC actuator-sensor based biomimetic underwater microrobot with 8 legs.’ In Proceedings of the IEEE International Conference on Automation and logistics, China, 1–3 September 2008, pp. 2495–2500.

14.

Gao

Guo

Feng

Wang

, ‘A novel underwater crablike microrobot.’ In Proceedings of the IEEE International Conference on Mechatronics and automation, China, 25–28 June 2006, pp. 272–277.

15.

Jung

Nam

Choi

, ‘Investigations on actuation characteristics of IPMC artificial muscle actuator.’ Sensors and Actuators A 107 (2002): 183–192.

16.

Bonomo

Fortuna

Giannone

Graziani

, ‘A nonlinear model for ionic polymer metal composites as actuators.’ Int. J. Smart Mater. Structs 16 (2002): 1–12.

17.

Newbury

K. M.

, ‘Characterization, modeling, and control of ionic polymer transducers.’ PhD Thesis, Virginia Polytechnic Institute and State University, USA, 2002.

18.

Shigley

J. E.

Mischke

C. R.

Budynas

R. G.

, Mechanical engineering design (McGraw-Hill, New York 2004).

19.

Vahabi

, ‘Adaptive control of a capsular microrobot based on identification and experimental validation of IPMC actuator.’ PhD Thesis, Amirkabir University of Technology, Tehran, 2010.