Mechanical Properties of Trabecular Bone by a Non-Destructive Compression Testing Approach

Abstract

In order to optimize non-destructive mechanical testing of trabecular bone specimens, different techniques were analysed, and correlations were established between properties derived from such non-destructive testings and those derived from destructive testing. Non-destructive testing to a fixed percentage of predicted ultimate stress was hampered by inaccuracy of this prediction. Simulation of non-destructive testing conducted to the linear' part of the compression curve using a drop of the increase of the stiffness (slope of the compression curve) below a certain value as stop criterion revealed strong correlations (r: 0.97–0.99) between the stiffness at the stop point and modulus of elasticity derived from destructive testing. However, trabecular damage will probably occur during such testing because high strain values were obtained. Testing to a fixed strain (0.6 per cent) also revealed strong correlation between the stiffness at the 0.6 per cent strain level and modulus of elasticity (r = 0.96) derived from destructive testing. By this technique trabecular damage was avoided and standardized elastic and viscoelastic energies could be obtained. Prediction of modulus of elasticity by indirect methods such as modulus of elasticity of specimens from the opposite symmetric location (r = 0.73), bone mineral concentration (r = 0.72) derived from photon absorptiometry and the CT number (r = 0.78) derived from quantitative computed tomography showed less strong correlations.

Get full access to this article

View all access options for this article.

References

Bentzen

S. M.

Hvid

Jørgensen

(1987) Mechanical strength of tibial trabecular bone evaluated by X-ray computed tomography, J. Biomech., 20, 743–752.

Brown

T. D.

Ferguson

T. D.

Jr. (1978) The development of a computational stress analysis of the femoral head. J. Bone Jt Surg., 60-A, 619–629.

Brown

T. D.

Ferguson

T. D.

Jr. (1980) Mechanical property distributions in the cancellous bone of the human proximal femur. Acta Orthop. Stand., 51, 429–437.

Carter

D. R.

Hayes

W. C.

(1977) The compressive behavior of bone as a two-phase porous structure, J. Bone Jt Surg., 59-A, 954–962.

Cowin

S. C.

(1983) The mechanical and stress adaptive properties of bone, Ann. biomed. Engng, 11, 263–295.

Ducheyne

Heymans

Martens

Aernoudt

DeMeester

Mulier

J. C.

(1977) The mechanical behaviour of intracondylar cancellous bone of the femur at different loading rates, J. Biomech., 10, 747–762.

Evans

F. G.

King

A. I.

(1961) Regional differences in some physical properties of human spongy bone, In Biomechanical studies of the musculoskeletal system. (Edited by Evans

) Charles C. Thomas, Springfield, Il, U. S. A.

Frost

H. M.

(1964) The law of bone structure, Charles C. Thomas, Springfield, Il., USA.

Goldstein

S. A.

Wilson

D. L.

Sonstegard

D. A.

Matthews

L. S.

(1983) The mechanical properties of human tibial trabecular bone as a function of metaphyseal location, J. Biomech., 16, 965–969.

10.

Goodship

A. E.

Lanyon

L. E.

McFie

(1979) Functional adaptation of bone to increased stress. J. Bone Jt Surg., 61-A, 539–546.

11.

Harrigan

T. P.

Harris

W. H.

Mann

R. W.

(1980) The anisotropic properties of trabecular bone, ORS Trans, 4, 193.

12.

Hvid

Jensen

(1984) Cancellous bone strength at the proximal human tibia, Engng Med., 13, 21–25.

13.

Hvid

Jensen

N. C.

Bünger

Sølund

Djurhuus

J. C.

(1985) Bone mineral assay: Its relation to the mechanical strength of cancellous bone, Engng Med., 14, 79–84.

14.

Lanyon

L. E.

Hampson

W. G. J.

Goodship

A. E.

Shah

J. S.

(1975) Bone deformation recorded in vivo from strain gauges attached to the human tibial shaft, Acta Orthop. Scand., 46, 256–278.

15.

Lanyon

L. E.

(1984) Functional strain as a determinant for bone remodelling, Calcif Tissue Int., 36, S56–S61.

16.

Linde

Hvid

Jensen

N. C.

(1985) Material properties of cancellous bone in repetitive axial loading, Engng Med., 14, 173–177.

17.

Linde

Hvid

(1987) Stiffness behaviour of trabecular bone specimens, J. Biomech., 20, 83–89.

18.

Linde

Hvid

(1988) The effect of constraint on the mechanical behaviour of trabecular bone specimens, J. Biomech., (in press).

19.

Linde

Hvid

Pongsoipetch

(1988) Energy absorptive properties of human trabecular bone specimens during axial compressive loading, J. Orthop Res., (in press).

20.

Martens

Van Audekercke

Delport

DeMeester

Mulier

J. C.

(1983) The mechanical characteristics of cancellous bone at the upper femoral region, J. Biomech., 16, 971–983.

21.

Mosekilde

L I

Mosekilde

L. E.

Danielsen

C. C.

(1987) Biomechanical competence of vertebral trabecular bone in relation to ash density and age in normal individuals, Bone, 8, 79–85.

22.

Radin

E. L.

Paul

I. L.

(1970) Does cartilage compliance reduce skeletal impact loads, Arthritis Rheum., 13, 139–143.

23.

Radin

E. L.

Paul

I. L.

Lowy

(1970a) A comparison of the dynamic force transmitting properties of subchondral bone and articular cartilage, J. Bone Jt Surg., 52-A, 444–456.

24.

Radin

E. L.

Paul

I. L.

Tolkoff

M. J.

(1970b) Subchondral bone changes in patients with early degenerative joint disease. Arthritis Rheum., 13, 400–405.

25.

Rubin

C. T.

(1984) Skeletal strain and the functional significance of bone architecture, Calcif. Tissue Int., 36, S11–S18.

26.

Rubin

C. T.

Lanyon

L. E.

(1984) Dynamic strain similarity in vertebrates; an alternative to allometric limb bone scaling. J. Theor. Biol., 107; 321–327.

27.

Schoenfeld

C. M.

Lautenschlager

E. P.

Meyer

P. R.

Jr. (1974) Mechanical properties of human cancellous bone in the femoral head, Med. Biol. Engng, 18, 313–317.

28.

Swanson

S. A. V.

Freeman

M. A. R.

(1966) Is bone hydra$ulically strengthened, Med. Biol. Engng., 4, 433–438.

29.

Townsend

P. R.

Raux

Rose

R. M.

Miegel

R. E.

Radin

E. L.

(1975) The distribution and anisotropy of the stiffness of cancellous bone in the human patella, J. Biomech., 8, 363–367.

30.

Vahey

J. W.

Lewis

J. L.

Vanderby

Jr. (1987) Elastic moduli, yield stress, and ultimate stress of cancellous bone in the canine proximal femur, J. Biomech., 20, 29–33.

31.

Walker

T. W.

Graham

J. D.

Mills

R. H.

(1976) Changes in the mechanical behaviour of the human femoral head associated with arthritic pathologies, J. Biomech., 9, 615–624.

32.

Williams

J. L.

Lewis

J. L.

(1982) Properties and anisotropic model of cancellous bone from the proximal tibial epiphysis, J. Biomech. Engng., 104, 50–56.

33.

Woo

S. L.-Y.

Gomez

M. A.

Seguchi

Endo

C. M.

Akeson

W. H.

(1983) Measurement of mechanical properties of ligament substance from a bone-ligament-bone preparation, J. Orthop. Res., 1, 22–29.