Some characteristics of the immiscible liquid binary cycle are illustrated on T-s diagrams. The effect on optimization of matching to waste-heat loads is explained.
Get full access to this article
View all access options for this article.
References
1.
BurnsideB. M. ‘The immiscible liquid binary Rankine cycle’, J. mech. Engng Sci.197618, 79–86.
2.
SegaK. ‘Freon turbine’, Chemical Economy and Engineering Review19746, 27–35.
3.
ThomasS. G.Transverse loading of simply supported thin-walled tubes M. Sc. Dissertation, University of Manchester Institute of Science and Technology, 1974.
4.
WatsonA. R.Finite deformations of thin-walled circular cylinders under transverse loading M. Sc. Dissertation, University of Manchester Institute of Science and Technology, 1975.
5.
ThomasS. G.ReidS. R.JohnsonW. ‘Large deformation of thin-walled circular tubes under transverse loading. I: An experimental survey of the bending of simply supported tubes under a central load’, Int. J. mech. Sci.197618, 325–333.
6.
WatsonA. R.ReidS. R.JohnsonW.ThomasS. G. ‘Large deformation of thin-walled circular tubes under transverse loading. II: Experimental study of the crushing of circular tubes by centrally applied opposed wedge-shaped indenters’, Int. J. mech. Sci.197618, 387–397.
7.
WatsonA. R.ReidS. R.JohnsonW. ‘Large deformation of thin-walled circular tubes under transverse loading. III: Further experiments on the bending of simply supported tubes’. Int. J. mech. Sci.197618, 501–509.
8.
BrazierL. G. ‘On the flexure of thin cylindrical shells and other thin sections’, Proc. R. Soc. (A)1927116, 104–114.
9.
ReissnerE. ‘On finite pure bending of cylindrical tubes’, Ost. Ing.-Z.196115, 165–172.
10.
ReissnerE.WeintschkeH. J. ‘Finite pure bending of circular cylindrical tubes’, Q. appl. Math.196320 (4), 305–319.
11.
NaT. Y.TurskiC. E. ‘Solution of the non-linear differential equations for finite bending of a thin-walled tube by parametric differentiation’, Aeronaut. Q.197425 (1), 14–18.
12.
YaoJ. C. ‘Large deflection analysis of buckling of a cylinder under bending’, J. appl. Mech.196229, 708–714.
13.
AdesC. S. ‘Bending strength of tubing in the plastic range’, J. aeronaut. Sci.195724, 605–610.
14.
AfendikL. G. ‘Inelastic bending of a tube with considerable curvature’, Prikl. Mekh.19684 (6), 45–51.
15.
AfendikL. G. ‘Stability of circular cylindrical shells in bending beyond elastic limit’, Prikl. Mekh.19706 (9), 39–44.
16.
ZdunkiewiczM. ‘Experiments with cold bending of tubes’, Mech. Miesiecznik Nauk-Tech.197043 (7), 366–369.
17.
ShermanD. R.GlassA. M. ‘Ultimate bending capacity of circular tubes’, Offshore Technol. Conf. 6th Anniv. 1974, Houston, Texas, Paper 2119, 901–910.
18.
HoffN. J. ‘Buckling at high temperature’, Jl R. aeronaut. Soc.195761 (563), 756–774.
