The Effect of Temperature Gradient on the Stability of Flow between Vertical,Concentric,Rotating Cylinders

Abstract

The effect of a radial temperature gradient on the hydrodynamic stability in the annular gap formed by two, vertical, concentric cylinders, the inner being rotatable and the outer both stationary and isothermally heated, was studied for the cases of zero and imposed axial fluid flow in the annular gap. For zero axial flow, it was found that the temperature gradient destabilizes the flow while not affecting the form of the secondary flow, viz. the classic Taylor vortex. For imposed axial flow, the point of neutral stability was modified only when natural convection was strong enough to affect the parabolic velocity profile associated with that flow; the extent of this modification was shown to depend on the direction of the axial flow. Also, the longitudinal temperature gradients within the gap were found to influence the axial wave number and the drift-velocity ratio.

Get full access to this article

View all access options for this article.

References

Becker

K. M.

Kaye

‘The influence of a radial temperature gradient on the instability of fluid flow in an annulus with an inner rotating cylinder’, Trans. ASME, Journal of H.T. 1962, 80, 106–110.

Walowit

Tsao

Diprima

R. C.

‘Stability of flow between arbitrarily spaced concentric cylinder surfaces, including the effect of a radial temperature gradient’, Trans. ASME, Journal of Applied Mechanics 1964, 585–592.

Haas

F. C.

Nissan

A. H.

‘Experimental heat transfer characteristic of a liquid in Couette motion and with Taylor vortices’, Proc. Roy. Soc. (London) 1961 A261, 215.

Snyder

H. A.

Karlsson

S. K. F.

‘Experiments on the stability of Couette motion with a radial thermal gradient’, Phys. Fluids 1964 7 (No. 10), 1696–1706.

Gazley

‘Heat transfer characteristics of the rotational and axial flow between concentric cylinders’, Trans. ASME 1958 80, 79–90.

Becker

K. H.

Kaye

‘Measurements of diabatic flow in an annulus with an inner rotating cylinder’, Trans. ASME, J.H.T. 1962 80 (No. 2), 97–105.

Kaye

Elgar

E. C.

‘Modes of adiabatic and diabatic fluid flow in an annulus with an inner rotating cylinder’, Trans. ASME 1958 80, 753–765.

Kurzweg

V. H.

‘A criterion for the stability of heterogeneous swirling flows’, Math. Phys. 2P, 141–143.

Fung

Y. T.

Kurzweg

U. M.

‘Stability of swirling flows with radius dependent density’, J. Fluid Mech. 1975 72 (Part 2), 243–255.

10.

Snyder

H. A.

‘Experiments on the stability of two types of spiral flow’, Annals of Physics 1965 31 (No. 2, Part 1).

11.

Castle

Mobbs

F. R.

‘Hydrodynamic stability of the flow between eccentric rotating cylinders: Visual observations and torque measurements’, Proc. I. Mech. E. 1967/68 182 (No. 3), 41–52.

12.

Simmers

D. A.

Coney

J. E. R.

‘The effect of Taylor vortex flow on the development length in concentric annuli’, J. mech. Engng Sci. 1979 21 (No. 2), 59–64.

13.

Sorour

M. M.

Coney

J. E. R.

‘An experimental investigation of the stability of spiral vortex flow’, J mech. Engng Sci. 1979 21 (No. 6) 397–402.

14.

Sorour

M. M.

Hydrodynamic instability, with special reference to the effect of heat transfer, in a concentric annulus having an inner rotating wall Ph.D. Thesis, University of Leeds, 1977.

15.

Taylor

G. I.

‘Stability of a viscous liquid contained between two rotating cylinders’, Phil. Trans. Roy. Soc. 1923 A233, 289–343.

16.

Droughton

J. V.

Studies in stratified flow Ph.D. Thesis, Mechanical and Aerospace Engineering Department, Rutgers University, New Brunswick, New Jersey.

17.

Withjack

E. M.

Chen

C. F.

‘An experimental study of Couette instability of stratified fluids’, J. Fluid. Mech. 66 (Part 4), 725–737.