In this paper, a general numerical solution to the elastohydrodynamic point contact problem is presented for moderate loads and material parameters. Isobars, contours and regression formulae describe how pressure and oil film thickness vary with geometry, material properties, load, and squeeze velocity, when the rolling velocity vector is at various angles to the static contact ellipse long axis. In addition, the EHL behaviour under spin is examined. The theoretical predictions of film thickness compare favourably with other numerical solutions to the point contact problem, as well as with experimental results which use the optical interferometry method to find film thickness and
Get full access to this article
View all access options for this article.
References
1.
GrubinA. N., Investigation of scientific and industrial research, 1949, Book 30 (Central Scientific Research Institute for Technology and Mechanical Engineering, Moscow) pp. 115–116.
2.
DowsonD.HigginsonG. R., Elastohydrodynamic lubrication (SI edition) 1977 (Pergamon Press, Oxford).
3.
HamrockB. J.DowsonD., ‘Isothermal EHL lubrication of point contacts, Part 1’, J. Lubric. Technol., 1976, 98, 223–229; ‘Part 2’, J. Lubric. Technol., 1976, 98, 375–383; ‘Part 3’, J. Lubric. Technol., 1977, 99, 264–274.
4.
RangerA. P.EttlesC. M. M.CameronA., ‘The solution of point contact EHL problem’, Proc. R. Soc. Lond., 1975, A346, 227–244.
5.
HookeC. J., ‘The EHL lubrication of heavily loaded point contacts’, J. mech. Engng Set, 1980, 22, 183–187.
6.
GoharR., ‘Oil film thickness and rolling friction in EHL point contact’, J. Lubric. Technol., 1971, 93, 371–382.
7.
MostofiA., Oil film thickness and pressure distribution in el-astohydrodynamic elliptical contacts, PhD thesis, Imperial College, University of London, 1981.
8.
TimoshenkoS. P.GoodierJ. N., Mathematical theory of elasticity3rd edition, 1970 (McGraw-Hill, New York).
9.
HamrockB. I.DowsonD., Ball bearing lubrication: the elastohydrodynamic lubrication of elliptical contacts, 1981 (Wiley, New York).
10.
RahnejatH.GoharR., ‘Design of profiled taper roller bearings’, Tribology Ml, December 1979, 269–276.
11.
ThorpN., Oil film thickness and friction in elliptical contacts, PhD thesis, Imperial College, University of London, 1972.
12.
ArchardJ. F.CowkingE. W., ‘EHL lubrication at point contacts’, Proc. Instn mech. Engrs, 1965–66, 180, 47–56.
13.
ChengH. S., ‘A numerical solution to the EHL film thickness in an elliptical contact’, J. Lubric. Technol., 1970, 92, 155–162.
14.
SnidleR. W.ArchardJ. F., ‘Theory of hydrodynamic lubrication for a spinning sphere’, Proc. Instn mech. Engrs, 1969–70, 184, 839–848.
15.
ThorpN.GoharR., ‘Oil film thickness and shape for a ball sliding in a grooved raceway’, J. Lubric. Technol., 1972, 94, 199–208.
