Abstract
when Designing steadily loaded bearings the designer can usually predict the position of the journal centre quite easily with the aid of one of the many load carrying capacity/eccentricity relationships available. With dynamically loaded bearings, however, the journal path will vary in magnitude and direction throughout the loading cycle and one of the designer's interests is in the trends of maximum eccentricity ratio and the corresponding oil film thickness for various bearing and engine conditions. From experience with journal path predictions for big-end bearings it has been found that the eccentricity ratio in the bearing due to the peak firing load seldom exceeds that obtained by the inertia load loop (although this load is smaller) and therefore, as a first approximation, it is thought justifiable to neglect the gas forces.
The results of this inertia study (numerical solution) applied to big-end bearings are presented in a general graphical form. Further work can be carried out on the same basis for main bearings, but this is more difficult to present in a general fashion as there are many more variables to consider, such as the phasing and magnitude of the crank out of balance and the firing order. This report therefore concentrates on the first step, i.e. that of big-end bearings.
Get full access to this article
View all access options for this article.