Heat Transfer in Compression-Ignition Engines: First Paper: Heat Transfer in a Quiescent Chamber Diesel Engine

Instantaneous and mean values of heat transfer at various positions in the combustion chamber were obtained, by means of surface thermocouples, for different loads and speeds and compared with those obtained theoretically from synthesized cycle calculations. The results show that the usual model of homogeneity in the cylinder is inadequate for heat transfer calculations. Peak rates of heat transfer when in the vicinity of a fuel spray were comparatively little dependent upon load or speed. At the periphery of the combustion chamber the mean heat transfer rates were appreciably lower than to the cylinder head and piston and the rapid rise in instantaneous values occurred appreciably later. The results all suggest the need for a more realistic model based upon the geometry and penetration of the fuel sprays.