Shear Strengthening of a PC Bridge Girder with NSM CFRP Rectangular Bars

Abstract

Bridges worldwide are falling into a state of disrepair caused by deterioration, traffic overloading, and poor maintenance. It is estimated that over 100,000 of the half million existing bridges in the US are in need of repair or replacement. Although the full replacement option could be viable, it is an expensive solution with significant disruption of service. This paper focuses on the use of carbon fiber reinforced polymer (CFRP) rectangular bars installed as near surface mounted (NSM) reinforcement for shear strengthening in conjunction with an externally bonded pre-cured CFRP laminate to increase the flexural capacity of a prestressed concrete (PC) bridge girder. The specimen, which was removed from an overloaded bridge in Kansas was strengthened and tested in the laboratory. Test results showed that the proposed NSM reinforcement technique represents an effective solution to increase shear capacity.

Keywords

bridges fiber reinforced polymer flexural strengthening prestressed concrete structural repair shear strengthening

References

AASHTO (1996). Standard Specifications for Highway Bridges (Sixteenth Edition), American Association of State Highway Traffic Officials, Washington D.C.

ACI Committee 440 (2002). Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, ACI 440.2R-02, American Concrete Institute, Farmington Hills, MI.

De Lorenzis

and Nanni

(2001a). “Strengthening of reinforced concrete beams with near-surface mounted fiber-reinforced polymer bars”, Structural Journal, ACI, Vol. 98, No. 1, pp. 60–68.

De Lorenzis

and Nanni

(2001b). “Characterization of FRP bars as near surface mounted reinforcement”, Journal of Composites for Construction, ASCE, Vol. 5, No. 2, pp. 114–121.

Hughes Brothers (2003). “Aslan 500 CFRP tape for near surface mount (NSM) structural strengthening (Flexure & Shear) of existing concrete, masonry or wood members”, http://www.hughesbros.com/.

Khalifa

Gold

W. J.

Nanni

and Aziz

Abdel M. I.

(1998). “Contribution of externally bonded FRP to shear capacity of RC flexural member”, Journal of Composites for Construction, ASCE, Vol. 2, No. 4, pp. 195–202.

Master Builders Technologies (1998). MBrace Composite Strengthening System-Engineering Design Guidelines, (Second Edition), Cleveland, OH.

Peterman

and Reed

C. E.

(2002). “Repair and strengthening of severely damaged 32-year old prestressed concrete bridge girders with externally bonded FRP reinforcement,” 81 Annual Meeting, Transportation Research Board, Washington, D.C., CD-ROM.

S&P Clever Reinforcement Company (2003). “Fiber reinforced polymer – design guideline”, http://www.reinforcement.ch/fibre.htm.