Layered Finite Element Analysis of One-Way and Two-Way Concrete Walls with Openings

Abstract

Empirical wall design equations provided in major codes of practice are conservative because they do not cover walls that are supported on all four sides or walls with slenderness ratios greater than 30. They do not cover walls that require openings for doors, windows and services. The recognition of such factors in design codes would result in savings in construction costs. This study investigates the effect of side restraints and the presence of openings for reinforced concrete wall panels where axial load eccentricity induces secondary bending. A numerical analysis of such walls is undertaken using the non-linear Layered Finite Element Method (LFEM), and results are compared with eight one-third to one-half scale wall panels tested previously at Griffith University. The LFEM predicts the failure loads, the load-deflection responses, the deformed shapes and the crack patterns of the tested wall panels. Subsequent parametric studies on the ultimate load carrying capacity of 54 one-way and two-way reinforced concrete walls with openings established relationships of failure load with slenderness ratio and eccentricity.

Keywords

finite element analysis concrete walls openings restraint conditions slenderness ratio eccentric load code methods

References

Al-Mahaidi

and Nicholson

(1997). “Nonlinear FE analysis of RC wall panels with openings”, Proceedings of the Fifteenth Australasian Conference on the Mechanics of Structures and Materials, Grzebieta

R. H.

eds., Melbourne, Australia, December, pp. 449–454.

American Concrete Institute (ACI) (2005). Building Code Requirements for Reinforced Concrete (ACI 318–05) and Commentary – ACI318R-05, Detroit, Michigan.

Doh

J.H.

and Fragomeni

(2004). “Evaluation and experimental work for concrete walls with openings in one and two-way action”, Proceedings of the Third Civil Engineering Conference in the Asian Region, Hong

S.W.

and Woo

, eds., Seoul, Korea, August, pp. 307–310.

Doh

J.H.

and Fragomeni

(2006). “Ultimate load formula for reinforced concrete wall panels with openings”, Advances in Structural Engineering, Vol. 9, No. 1, 2006, pp. 103–115.

Doh

J.H.

Fragomeni

and Loo

Y.C.

(2001). “Investigation into the behaviour of reinforced concrete wall panels by finite element method”, Proceedings of the ICCMC/IBST 2001 Advanced Technologies in Design, Construction and Maintenance of Concrete Structures, Taketo

and Nguyen

T.D.

, eds., Hanoi, Vietnam, March, pp. 99–105.

Fragomeni

(1998). “Finite element analysis of reinforced concrete walls”, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering and Construction, Yang

Y.B.

and Leu

L.J.

, eds., Taipei, Taiwan, January, pp. 259–264.

Guan

and Loo

Y.C.

(1997). “Flexural and shear failure analysis of reinforced concrete slabs and flat plates”, Advances in Structural Engineering, Vol. 1, No. 1, pp. 71–85.

Guan

and Loo

Y.C.

(2002). “Deflection, cracking and failure analysis of planar continuum reinforced concrete structures”, CD-ROM Proceedings of the Second International Conference on Advances in Structural Engineering Mechanics, Choi

C.K.

and Schnobrich

W.C.

, eds., Pusan, Korea, August, pp. 1–8.

Loo

Y.C.

and Guan

(1997). “Cracking and punching shear failure analysis of RC flat plates”, Journal of Structural Engineering, ASCE, Vol. 123, No. 10, pp. 1321–1330.

10.

Polak

M.A.

(1998). “Shear analysis of reinforced concrete shells using degenerate elements”, Computers & Structures, Vol. 68, No. 1–3, pp. 17–29.

11.

Raviskanthan

Al-Mahaidi

and Sanjayan

J.G.

(1997). “Nonlinear finite element analysis of slender HSC walls”, Proceedings of the Fifteenth Australasian Conference on the Mechanics of Structures and Materials, Grzebieta . eds., Melbourne, Australia, December, pp. 455–460.

12.

Saheb

S.M.

and Desayi

(1989). “Ultimate strength of RC wall panels in one-way in-plane action”, Journal of Structural Engineering, ASCE, Vol. 115, No. 10, pp. 2617–2630.

13.

Saheb

S.M.

and Desayi

(1990a). “Ultimate strength of R.C. wall panels in two-way in-plane action”, Journal of Structural Engineering, ASCE, Vol. 116, No. 5, pp. 1384–1402.

14.

Saheb

S.M.

and Desayi

(1990b). “Ultimate strength of RC wall panels with openings”, Journal of Structural Engineering, ASCE, Vol. 116, No. 6, pp. 1565–1578.

15.

Standards Association of Australia (SAA) (2001). AS3600–2001: Concrete structures, Sydney, Australia.

16.

Zielinski

Z.A.

Troitsky

M.S.

and Christodoulou

(1982). “Full-scale bearing strength investigation of thin wall-ribbed reinforced concrete panels”, ACI Structural Journal, Vol. 79, No. 32, pp. 313–331.