Design Optimization of Long-Span King-Post Trusses

Abstract

With a unique arch and tie feature, king-post trusses can be built economically and efficiently and quickly for long-span roof structures. It has gained much popularity since its advent in early 1990s. The optimal design of the king-post truss system involves not only weight of the material but also factors such as fabrication, transportation and erection. This paper presents a design optimization method for long-span king-post roof truss systems. Through two example trusses built in North America, the main parameters affecting the cost of the truss system are studied thoroughly. Design guidelines, which aim to obtain a cost-effective design, are given for the determination of the depths of the overall truss and arched top truss. The result of the study is of great assistance to practicing engineers.

Keywords

king-post truss tied-arch truss steel design long-span structures structural optimization minimum cost

References

Canadian Institute of Steel Construction. (2004). Hand Book of Steel Construction, 8th Edition, Willowdale, Ontario, Canada.

CSA (2001). CAN/CSA-S16–01 Limit States Design of Steel Structures, Canadian Standards Association.

Cuoco

. (1994). “Long-span roof structure”, Proceedings of National Steel Construction Conference, American Institute of Steel Construction, Pittsburge, PA, May 18–20.

Fleury

(1979). “Structural weight optimization by dual methods of convex programming”, International Journal of Numerical Methods in Engineering, Vol. 14, pp. 1761–1783.

Gong

(2003). Performance-Based Design of Steel Building Frameworks under Seismic Loading, Ph.D. Thesis, University of Waterloo, Ontario, Canada.

Gong

and Grierson

D.E.

(2005). “Performance-based design sensitivity analysis of steel moment frames under earthquake loading”, International Journal for Numerical Methods in Engineering, Vol. 63, No. 9, pp. 1229–1249.

Grierson

D.E.

(1997a). “Chapter 6: Sensitivity analysis for structural design”, Guide to Structural Optimization, edited by Arora

J. S.

, ASCE.

Grierson

D.E.

(1997b). “Chapter 8: How to optimize structural steel frameworks”, Guide to Structural Optimization, edited by Arora

J. S.

, ASCE.

Scarangello

T.Z.

and Philips

E.M.

(2000). “Steel meets the pepsi challenge”, Modern Steel Construction, AISC, December.

10.

Scarangello

T.Z.

(2001). “Big rig roof system”, Construction Innovation Forum, Nova Award Nomination 33. <http://www.cif.org>.

11.

Schmit

L.A.

and Sfarshi

(1974). “Some approximation concepts for structural synthesis”, AIAA Journal, Vol. 12, No. 5, pp. 692–699.

12.

Vincent

R.B.

and Varma

S.K.

(1997). “Long span steel roof structures”, Proceedings of the Fifth International Conference of Steel Structures, Guadalajara, Mexico, November 18–21.

13.

Waggoner

M.C.

and Wright

D.P.

(2006). “Collaborate and conquer”, Modern Steel Construction, AISC, August.

14.

and Gong

(2001). “Preliminary design of long-span king-post truss systems with a genetic algorithm”, Computer-Aided Civil and Infrastructure Engineering, Vol. 16, No. 2, pp. 94–105.

15.

and Gong

(2003). “Manual procedure for least-weight design of king-post truss systems”, Practice Periodical on Structural Design and Construction, ASCE, Vol. 8, No. 4, pp.195–202.