Recent Development of Deployable Tension-Strut Structures

Abstract

This paper presents the latest development of Deployable Tension-Strut Structures (DTTSs), which can be assembled quickly to save construction time while the structural efficiency is maintained to be as good as that of conventional double-layer space frames. Pre-tensioning techniques are used to enhance the structural stiffness and stability of the structure after it is “locked” to its final configuration. The design concept is explained in details with four illustrative examples and the structural efficiency of the proposed systems is investigated by using advanced non-linear analysis and free-vibration analysis. Novel moveable pin-jointed system has been developed to allow deployment of the tension-strut structures. Full scale prototype is built to demonstrate the buildability and deployability of the proposed systems. The results conclude that the proposed structures are structural effective, lightweight and can be easily deployable for spatial enclosure.

Keywords

deployable structures tension-strut structures pre-tensioning structural efficiency space frame

References

Chung

K.F.

and Ip

K.H.

(2000). “Finite element modeling of bolted connections between cold-formed steel strips and hot rolled steel plates under static shear loading”, Engineering Structures, Vol. 22, No. 10, pp. 1271–1284.

Chung

K.F.

and Ip

K.H.

(2001). “Finite element investigation on the structural behaviour of cold-formed steel bolted connections”, Engineering Structures, Vol. 23, No. 9, pp. 1115–1125.

Darcy

and Mahendran

(2008). “Development of a new cold-formed steel building system”, Advances in Structural Engineering, Special issue: Advances in Cold-Formed Steel Structures, Accepted manuscript.

Escrig

(1996a). “General survey of deployability in architecture”, Proceedings of the MARAS II, Sevilla, Spain, pp. 113–122.

Escrig

(1996b). “The adventure of covering a swimming-pool with an X-frame structure”, Proceedings of the MARAS II, Sevilla, Spain, pp. 113–122.

Gantes

(1996). Deployable Structures: Application and Design, WIT Press, USA.

H.C.

and Chung

K.F.

(2004). “Experimental investigation into the structural behaviour of lapped connections between cold-formed steel Z sections”, Thin-Walled Structures, Vol. 42, No. 7, pp. 1013–1033.

Kwon

Y.B.

Chung

H.S.

and Kim

(2006). “Experiments of cold-formed steel connections and portal frames”, Journal of Structural Engineering, ASCE, Vol. 132, No. 4, pp. 600–607.

Kwon

Y.B.

Chung

H.S.

and Kim

G.D.

(2008). “Development of cold-formed steel portal frames with PRY sections”, Advances in Structural Engineering, Special issue: Advances in Cold-Formed Steel Structures, Accepted manuscript.

10.

Liew

J.Y.R.

and Tang

L.K.

(2000). “Advanced plastic hinge analysis for the design of tubular space frames”, Engineering Structures, Vol. 22, No. 7, pp. 769–783.

11.

Liew

J.Y.R.

Punniyakoty

N.M.

and Shanmugam

N.E.

(2001). “Limit-state analysis and design of cable-tensioned structures”, International Journal of Space Structures, Vol. 16, No. 2, pp. 95–110.

12.

Pellegrino

and You

(1996). Expandable/Collapsible Structures, British Patent Application No: WO/1997/027369.

13.

K.K.

Liew

J.Y.R.

and Krishnapillai

(2006). “Deployable tension-strut structures: From concept to implementation”, Journal of Constructional Steel Research, Vol. 62, No.3, pp. 195–209.

14.

K.K.

Liew

J.Y.R.

and Anandasivam

(2006). “Deployable tension-strut structures: Structural morphology study and alternative form creations”, Journal of the International Association for Shell and Spatial Structures: IASS, Vol. 21, No. 3, pp. 149–164.

15.

Wong

M.F.

and Chung

K.F.

(2002). “Structural behaviour of bolted moment connections in cold-formed steel beam-column sub-frames”, Journal of Constructional Steel Research, Vol. 58, No. 2, pp. 253–274.