q-Rung Orthopair Fuzzy Improved Power Weighted Operators For Solving Group Decision-Making Issues

Abstract

This paper proposes a new multi-criteria group decision-making (MCGDM) method utilizing q-rung orthopair fuzzy (qROF) sets, improved power weighted operators and improved power weighted Maclaurin symmetric mean (MSM) operators. The power weighted averaging operator and power weighted Maclaurin symmetric mean (MSM) operator used in the existing MCGDM methods have the drawback of being unable to distinguish the priority order of alternatives in some scenarios, especially when one of the qROF numbers being considered has a non-belongingness grade of 0 or a belongingness grade of 1. To address this limitation of existing MCGDM methods, four operators, namely qROF improved power weighted averaging (qROFIPWA), qROF improved power weighted geometric (qROFIPWG), qROF improved power weighted averaging MSM (qROFIPWAMSM) and qROF improved power weighted geometric MSM (qROFIPWGMSM), are proposed in this paper. These operators mitigate the effects of erroneous assessment of information from some biased decision-makers, making the decision-making process more reliable. Following that, a group decision-making methodology is developed that is capable of generating a reasonable ranking order of alternatives when one of the qROF numbers considered has a non-belongingness grade of 0 or a belongingness grade of 1. To investigate the applicability of the proposed approach, a case study is also presented and a comparison-based investigation is used to demonstrate the superiority of the approach.

Keywords

q-rung orthopair fuzzy sets improved power weighted operators improved power weighted Maclaurin symmetric mean (MSM) operators group decision-making

1 Introduction

Fuzzy sets (FSs) (Zadeh, 1965) were initiated primarly due to the consideration of ambiguous human evaluations when dealing with realistic problems. Alternatively, the FSs doctrine can manage the reality beyond computational observation and comprehension, that is ambiguity, partial belongingness, inaccuracy and sharpless limits (Zhan et al., 2022). Later on, intuitionistic FSs (Atanassov, 1986) were introduced as a generalization of FSs to tackle problems that have deficient data. Since IFSs were proposed, many scholars have conducted in-depth studies (Chen and Chang, 2016; Chen et al., 2016; Garg, 2017b, 2019; Kumar and Chen, 2021; Mishra et al., 2019, 2020; Zeng et al., 2019; Zou et al., 2020). Yet, the relevance of intuitionistic FS is restricted because of given limitation, which is the sum of belongingness grade (BG) μ and non-belongingness grade (NBG) ν cannot surpass one, that is $μ + ν ⩽ 1$ . However, it was later discovered that the aforesaid limitation is not satisfied based on expert preferences for complicated decision-making difficulties. For example, if an expert favours BG 0.7 and NBG 0.5 during the usage of IFSs, at that point, obviously, their sum surpasses 1. To overcome this sort of circumstance, Yager (2013a; 2013b) pioneered the notion of Pythagorean FSs with BG μ and NBG ν complying with the condition $μ^{2} + ν^{2} ⩽ 1$ . As a result, Pythagorean FSs are preferred over intuitionistic FSs for expressing ambiguous data. Numerous studies have been conducted based on Pythagorean FSs. Yager and Abbasov (2013) developed a decision-making (DM) approach with Pythagorean fuzzy (PF) sets. An extension of TOPSIS tool under PF sets setting was realized by Zhang and Xu (2014) to resolve DM issues. Ma and Xu (2016) presented the symmetric PF weighted aggregation operators (AOs). Garg (2016a) defined some new generalized PF information AOs and applied them to DM problems. Garg (2016b) also presented a DM process based on correlation coefficients of PF sets. A confidence level-based methodology was presented by Garg (2017a) with PF information. Peng et al. (2017) built up a series of PF information measures and applied them in DM. Garg (2018) developed generalized geometric interactive AOs based on PF sets and Einstein operations. Mardani et al. (2018) extensively reviewed decision making methods based on fuzzy aggregation operators. Nguyen et al. (2019) introduced PF exponential similarity measures to tackle pattern recognition problems. Nie et al. (2019) provided a DM strategy with PFSs using Shapley fuzzy measures and the partitioned normalized weighted Bonferroni mean operator. Jana et al. (2019a) used PF Dombi operators to tackle MADM problems. Rani et al. (2019) presented a VIKOR approach with entropy and divergence measures of PFSs. To assess waste treatment technologies, Rani et al. (2020) again proposed a new DM framework. Ejegwa (2021) proposed a generalized tri-parametric correlation coefficient for PF sets.

The q-rung orthopair fuzzy (qROF) set, introduced by Yager (2017), reserves the constraint that the sum of qth power of the BG and the NBG must be the value in $[0, 1]$ , i.e. $0 ⩽ μ^{q} + ν^{q} ⩽ 1$ . Clearly, qROF sets are extended versions of intuitionistic FSs (for $q = 1$ ) and PF sets (for $q = 2$ ). For the last couple of years, information aggregation has been a popular topic due to its significance and close connection to the issues of multi-criteria group decision-making (MCGDM) under the qROF setting. The qROF weighted averaging and geometric (qROFWA and qROFWG, respectively) were announced by Liu and Wang (2018). Based on the ideas of certainty and possibility, Yager and Alajlan (2017) recommended approximate reasoning on qROFSs. Peng et al. (2018) proposed exponential operators and acquired satisfactory outputs after using them in the assessment of the teaching management system. In a qROFSs context, Yager et al. (2018) managed strong coordination between probability, certainty, believability, and faith. Liu and Liu (2018) proposed qROF weighted BM operators and used them for MCGDM problems. Wei et al. (2018) introduced qROF weighted Heronian mean AOs in DM issues. Jana et al. (2019b) proposed qROF Dombi weighted averaging and geometric operators for aggregating criteria values. Mi et al. (2019) settled a multi-criteria DM (MCDM) issue utilizing a qROFS-VIKOR strategy. Xing et al. (2019a) proposed a new group of weighted AOs to amassed qROF data which takes part in the rearrangement of BG and NBG in qROFNs as per different principles. Qin et al. (2019a) presented Archimedean Muirhead mean (MM) AOs of qROFNs and furthermore indicated its conceivable application in settling MCGDM problem. In view of association operations and dual Hamy mean (HM) operation, Xing et al. (2019b) introduced qROF interaction dual HM AO to solve a MCGDM problem. Qin et al. (2019b) built up the Archimedean power partitioned MM of qROFNs to tackle the MCGDM strategy. Zhong et al. (2019) introduced qROF Dombi power partitioned weighted Heronian mean (HEM) AO to decrease the negative impact of some criteria degrees during the aggregation process. Darko and Liang (2020) built up some qROF Hamacher AOs to extend EDAS technique for solving MCDM concern. Yang and Pang (2020) developed qROF Bonferroni mean (BM) Dombi operators for a site selection problem. Yang et al. (2020) developed an online shopping structure for utilizing the qROF interaction weighted HEM operator. Joshi and Gegov (2020) conveyed the commonality level of DEs with considered elements for starting appraisals on qROF setting and suggested some AOs to combine the required information. Liu and Wang (2020) introduced qROF generalized MSM operator (qROFGMSM) and qROF generalized geometric MSM operator (qROFGGMSM), which might access BGs and NBGs in the range $[0, 1]$ , respectively, and admit different criteria. Using qROF-MULTIMOORA methodology and qROF Dombi-Prioritized weighted AOs, Aydemir and Gunduz (2020) solved a MCDM problem. Garg and Chen (2020) presented qROF weighted neutrality operators by using the notion of proportional distribution procedures of the BGs and NBGs. Liu et al. (2022a) developed group decision-making tool using linguistic qROF generalized point weighted AOs.

1.1 Research Motivation

The interrelationship between multiple criteria can be seen in different realistic situations. Many of the existing studies (Liu and Wang, 2018; Jana et al., 2019b; Liu and Wang, 2019; Garg and Chen, 2020) cannot tackle this situation. Although few operators (Liu and Liu, 2018; Yang and Pang, 2020) have been developed earlier, none of them is capable of handling this situation as they consider dependency between two criteria only. Although the Archimedean Muir-head mean operator (Qin et al., 2019a) and generalized MSM operator (Liu and Wang, 2018) can meet this requirement, they fail to eliminate the impact of extreme evaluating criteria values from some biased experts with diverse preference attitudes. To address such circumstances, Liu et al. (2020) proposed qROF power MSM operator. The method of Liu et al. (2020) has the constraint that it fails to distinguish the priority orders of alternatives in certain cases, specifically when among the qROF numbers considered one qROF number has a non-belongingness grade that equals to 0 (or a belongingness grade that equals to 1). Thus, it is essential to develop a novel MCGDM approach to overcome the limitation of the existing method (Liu et al., 2020) and the existing power weighted MSM operator (Liu et al., 2020).

1.2 Contributions

To overcome the shortcomings of Liu et al.’s (2020) method, in this paper, the followings have been incorporated:

1.
Some new operational laws are presented in order to fair treatment of belongingness and non-belongingness grades.
2.
Four new operators, namely qROF improved power weighted averaging and geometric (qROFIPWA and qROFIPWG, resp.) operators, qROF improved power weighted averaging and geometric MSM (qROFIPWAMSM and qROFIPWGMSM, resp.) operators are developed.
3.
A novel DM approach is developed based on the proposed operators. This proposed approach can resolve the limitations of Liu et al. (2020).
4.
To show the efficiency of the proposed methodology, a personnel selection problem is considered under qROF setting.
5.
A detailed comparative investigation is demonstrated to validate the superiority of the proposed model.
The rest of the paper is arranged as given below:

Some essential concepts related to qROF sets are briefly discussed in Section 2. Section 3 presents some new operations between qROF numbers. This section also puts forward the qROFPWA operator, qROFIPWG operator, qROFIPWAMSM operator and qROFIPWGMSM operator along with their characteristics. In Section 4, a decision-making methodology using the developed operators is provided. A case study of personnel selection problem is demonstrated in Section 5 to show the applicability of the developed approach. The solution of the case study, effect of the parameter and comparative study are also demonstrated in this section. Section 6 concludes the paper along with future research directions.
2 Preliminaries

2.1 q-Rung Orthopair Fuzzy Sets (qROFSs)

Some important concepts on qROFNs, basic operations between qROFNs and qROF weighted neutral AOs are highlighted as follows:

Definition 1 (Yager, 2017).

Let U be the discourse set. Then a $qROFS$ Θ on U is given by $\begin{array}{r} Θ = {⟨ t, Δ (t), \nabla (t) ⟩ : t \in U}, \end{array}$ where $Δ (t)$ and $\nabla (t)$ represent the BG and NBG, respectively, of $t \in U$ with the constraint $0 ⩽ Δ (t)$ , $\nabla (t) ⩽ 1$ and $0 ⩽ {(Δ (t))}^{q} + {(\nabla (t))}^{q} ⩽ 1$ , $(q ⩾ 1)$ .

Next, the hesitancy grade of $t \in U$ in Θ is given by $π (t) = \sqrt[q]{1 - {(Δ (t))}^{q} - {(\nabla (t))}^{q}}$ . Obviously, $0 ⩽ π (t) ⩽ 1$ . Also, Yager (2017) called the pair $⟨ Δ (t), \nabla (t) ⟩$ a $qROFN$ . For easiness, the symbol $Θ = ⟨ Δ, \nabla ⟩$ is used to signify a $qROFN$ . Suppose $Σ^{U}$ denotes the collection of all qROFNs over U.

Definition 2 (Liu and Wang, 2018).

Let $Θ = ⟨ Δ, \nabla ⟩$ be a qROFN. Then the score value of Θ is defined by $\begin{array}{r} V (Θ) = Δ^{q} - \nabla^{q} . \end{array}$ (1)

Clearly, $- 1 ⩽ S_{c} (Θ) ⩽ 1$ . It should be mentioned that the score value cannot be effectively utilized to separate numerous qROFNs for the situation when score values become identical. As a result, when comparing qROFNs, it is not recommended to rely solely on their score values. To manage such an issue, Liu and Wang (2018) proposed the idea of accuracy value of a qROFN.

Definition 3 (Liu and Wang, 2018).

Let $Θ = ⟨ Δ, \nabla ⟩$ be a qROFN. Then the accuracy value of Θ is given by $\begin{array}{r} A (Θ) = Δ^{q} + \nabla^{q} . \end{array}$ (2)

According to the score function and accuracy function, a comparison scheme of qROFNs is given as follows: Definition 4 (Liu and Wang, 2018).

Let $Θ_{1} = ⟨ Δ_{1}, \nabla_{1} ⟩$ and $Θ_{2} = ⟨ Δ_{2}, \nabla_{2} ⟩$ be two qROFNs. Then

(1)
If $V (Θ_{1}) > V (Θ_{2})$ , then $Θ_{1} ≻ Θ_{2}$ ;
(2)
If $V (Θ_{1}) = V (Θ_{2})$ , then
(i)
if $A (Θ_{1}) > A (Θ_{2})$ , then $Θ_{1} ≻ Θ_{2}$ ;
(ii)
if $A (Θ_{1}) = A (Θ_{2})$ , then $Θ_{1} = Θ_{2}$ .

Definition 5 (Liu and Wang, 2018).

Let $Θ_{1} = ⟨ Δ_{1}, \nabla_{1} ⟩$ and $Θ_{2} = ⟨ Δ_{2}, \nabla_{2} ⟩$ be two qROFNs and $λ > 0$ . Then the basic operations are defined by $\begin{aligned} (i) & Θ_{1} \otimes Θ_{2} = ⟨ \sqrt[q]{1 - (1 - Δ_{1}^{q}) (1 - Δ_{2}^{q})}, \nabla_{1} \nabla_{2} ⟩, \end{aligned}$ (3) $\begin{aligned} (ii) & Θ_{1} \otimes Θ_{2} = ⟨ Δ_{1} Δ_{2}, \sqrt[q]{(1 - (1 - \nabla_{1}^{q}) (1 - \nabla_{2}^{q}))} ⟩, \end{aligned}$ (4) $\begin{aligned} (iii) & λ Θ_{1} = ⟨ \sqrt[q]{1 - {(1 - Δ_{1}^{q})}^{λ}}, \nabla_{1}^{λ} ⟩, \end{aligned}$ (5) $\begin{aligned} (iv) & Θ_{1}^{λ} = ⟨ Δ_{1}^{λ}, \sqrt[q]{1 - {(1 - \nabla_{1}^{q})}^{λ}} ⟩ . \end{aligned}$ (6)

Definition 6.

(Liu et al., 2020). Let $Θ_{1} = ⟨ Δ_{1}, \nabla_{1} ⟩$ and $Θ_{2} = ⟨ Δ_{2}, \nabla_{2} ⟩$ be two qROFNs. Then the normalized Hamming distance between them is expressed as: $\begin{array}{r} Dist (Θ_{1}, Θ_{2}) = \frac{1}{2} (| Δ_{1}^{q} - Δ_{2}^{q} | + | \nabla_{1}^{q} - \nabla_{2}^{q} | + | π_{1}^{q} - π_{2}^{q} |) . \end{array}$ (7)

2.2 Power Averaging Operator (PAO)

The PAO, discovered by Yager (2001), can relegate weights to the aggregated elements’ values by means of processing the degree of support among the elements. The conventional definition of PAO is given by:

Definition 7 (Yager, 2001).

Let $b_{1}, b_{2}, \dots, b_{n}$ be a collection of crisp values. Then the power averaging operator (PAO) of these numbers is defined as follows: $\begin{array}{r} P A (b_{1}, b_{2}, \dots, b_{n}) = \frac{\sum_{i = 1}^{n} (1 + ψ (b_{i})) b_{i}}{\sum_{i = 1}^{n} (1 + ψ (b_{i}))}, \end{array}$ (8) where $ψ (b_{i}) = \sum_{j = 1, j \neq i}^{n} Supp (b_{i}, b_{j})$ .

Here, $Supp (b_{i}, b_{j})$ denotes the support of $b_{i}$ from $b_{j}$ and has the three axioms as (i)

$0 ⩽ Supp (b_{i}, b_{j}) ⩽ 1$ ,

(ii)

$Supp (b_{i}, b_{j}) = Supp (b_{j}, b_{i})$ ,

(iii)

$Supp (b_{i}, b_{j}) ⩾ Supp (b_{k}, b_{r})$ provided $| b_{i} - b_{j} | < | b_{k} - b_{r} |$ , where $1 ⩽ i$ , $j, k, r ⩽ n$ .

3 qROF Improved Power Weighted Operators

3.1 New Operations Between qROFNs

A few new operations are introduced between qROFNs and the basic laws are investigated.

Definition 8.
Let $Θ_{1} = ⟨ Δ_{1}, \nabla_{1} ⟩$ and $Θ_{2} = ⟨ Δ_{2}, \nabla_{2} ⟩$ be two qROFNs and $λ > 0$ . Then we define: $\begin{aligned} (i) & Θ_{1} \tilde{\oplus} Θ_{2} = ⟨\sqrt[q]{1 - \prod_{r = 1}^{2} (1 - Δ_{r}^{q})}, \sqrt[q]{\prod_{r = 1}^{2} (1 - Δ_{r}^{q}) - \prod_{r = 1}^{2} (1 - Δ_{r}^{q} - \nabla_{r}^{q})}⟩; \end{aligned}$ (9) $\begin{aligned} (ii) & Θ_{1} \tilde{\otimes} Θ_{2} = ⟨\sqrt[q]{\prod_{r = 1}^{2} (1 - \nabla_{r}^{q}) - \prod_{r = 1}^{2} (1 - Δ_{r}^{q} - \nabla_{r}^{q})}, \sqrt[q]{1 - \prod_{r = 1}^{2} (1 - \nabla_{r}^{q})}⟩; \end{aligned}$ (10) $\begin{aligned} (iii) & λ Θ_{1} = ⟨ \sqrt[q]{1 - {(1 - Δ_{1}^{q})}^{λ}}, \sqrt[q]{{(1 - Δ_{1}^{q})}^{λ} - {(1 - Δ_{1}^{q} - \nabla_{1}^{q})}^{λ}} ⟩; \end{aligned}$ (11) $\begin{aligned} (iv) & Θ_{1}^{λ} = ⟨ \sqrt[q]{{(1 - \nabla_{1}^{q})}^{λ} - {(1 - Δ_{1}^{q} - \nabla_{1}^{q})}^{λ}}, \sqrt[q]{1 - {(1 - \nabla_{1}^{q})}^{λ}} ⟩ . \end{aligned}$ (12)

To understand the superiority of the developed operations, four examples are considered as follows:
Example 1.
Let us consider two qROFNs $Θ_{1} = ⟨ 0.4, 0.7 ⟩$ and $Θ_{2} = ⟨ 0.8, 0 ⟩$ . Then using the basic operational laws (Liu and Wang, 2018) of qROFNs, we have $Θ_{1} \oplus Θ_{2} = ⟨ 0.8352, 0 ⟩$ , which means that the non-zero non-belongingness grade has no impact on the output. This makes the operation ‘⊕’ unreasonable. But based on the proposed operations ‘ $\tilde{\oplus}$ ’ and ‘ $\tilde{\otimes}$ ’, we have $Θ_{1} \tilde{\oplus} Θ_{2} = ⟨ 0.8352, 0.42 ⟩$ and $Θ_{1} \tilde{\otimes} Θ_{2} = ⟨ 0.6196, 0.7 ⟩$ .
Example 2.
Let us consider two qROFNs $Θ_{1} = ⟨ 1, 0 ⟩$ and $Θ_{2} = ⟨ 0.8, 0.5 ⟩$ . Then using the basic operational laws (Liu and Wang, 2018) of qROFNs, we have $Θ_{1} \oplus Θ_{2} = ⟨ 1, 0 ⟩$ , which means that the belongingness grade which is not equals to ‘1’ has no impact on the output. This again makes the operation ‘⊕’ unreasonable. But based on the proposed operation ‘ $\tilde{\otimes}$ ’, we get $Θ_{1} \tilde{\otimes} Θ_{2} = ⟨ 0.8660, 0.5 ⟩$ .
Example 3.
Let us consider two qROFNs $Θ_{1} = ⟨ 0, 0.7 ⟩$ and $Θ_{2} = ⟨ 0.8, 0.3 ⟩$ . Then using the basic operational laws (Liu and Wang, 2018) of qROFNs, we have, $Θ_{1} \otimes Θ_{2} = ⟨ 0, 0.7320 ⟩$ , which means that the non-zero belongingness grade has no impact on the output. This makes the operation ‘⊗’ unreasonable. But based on the proposed operations ‘ $\tilde{\oplus}$ ’ and ‘ $\tilde{\otimes}$ ’, we have $Θ_{1} \tilde{\oplus} Θ_{2} = ⟨ 0.8, 0.4714 ⟩$ and $Θ_{1} \tilde{\otimes} Θ_{2} = ⟨ 0.5713, 0.7320 ⟩$ .
Example 4.
Let us consider two qROFNs $Θ_{1} = ⟨ 0, 1 ⟩$ and $Θ_{2} = ⟨ 0.6, 0.6 ⟩$ . Then using the basic operational laws (Liu and Wang, 2018) of qROFNs, we have $Θ_{1} \otimes Θ_{2} = ⟨ 0, 1 ⟩$ , which means that the non-belongingness grade which is not equals to ‘1’ has no impact on the output. This again makes the operation ‘⊗’ unreasonable. But based on the proposed operation ‘ $\tilde{\oplus}$ ’, we have $Θ_{1} \tilde{\oplus} Θ_{2} = ⟨ 0.6, 0.8 ⟩$ .

From the above four examples, it is clear that our proposed operations are more sensible. Theorem 1.
Let $Θ_{1} = ⟨ Δ_{1}, \nabla_{1} ⟩$ and $Θ_{2} = ⟨ Δ_{2}, \nabla_{2} ⟩$ be two qROFNs and $λ, λ_{1}, λ_{2} > 0$ . Then: (i)
$Θ_{1} \tilde{\oplus} Θ_{2} = Θ_{2} \tilde{\oplus} Θ_{1}$ ;
(ii)
$Θ_{1} \tilde{\otimes} Θ_{2} = Θ_{2} \tilde{\otimes} Θ_{1}$ ;
(iii)
$λ (Θ_{1} \tilde{\oplus} Θ_{2}) = λ Θ_{1} \tilde{\oplus} λ Θ_{2}$ ;
(iv)
${(Θ_{1} \tilde{\otimes} Θ_{2})}^{λ} = Θ_{1}^{λ} \tilde{\otimes} Θ_{2}^{λ}$ ;
(v)
$(λ_{1} + λ_{2}) Θ_{1} = λ_{1} Θ_{1} \tilde{\oplus} λ_{2} Θ_{1}$ ;
(vi)
$Θ_{1}^{λ_{1} + λ_{2}} = Θ_{1}^{λ_{1}} \tilde{\otimes} Θ_{1}^{λ_{2}}$ .

Proof.
Follows from Definition 8. □

3.2 qROF Improved Power Weighted Averaging Operators

In this paper, qROF improved power weighted averaging (qROFIPWA) and qROF improved power weighted averaging MSM (qROFIPWAMSM) operators are developed as follows.

Definition 9.
Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . Then the qROFIPWA operator is defined by: $\begin{array}{r} qROFIPWA (Θ_{1}, Θ_{2}, \dots, Θ_{n}) = {⨁^{˜}}_{r = 1}^{n} \frac{ϖ_{r} (1 + ψ (Θ_{r}))}{\sum_{r = 1}^{n} ϖ_{r} (1 + ψ (Θ_{r}))} Θ_{r} . \end{array}$ (13)

In Eq. (13), $\frac{ϖ_{r} (1 + ψ (Θ_{r}))}{\sum_{r = 1}^{n} ϖ_{r} (1 + ψ (Θ_{r}))}$ is called the power weight of $Θ_{r}$ , where $ϖ_{r}$ is the weight of $Θ_{r}$ satisfying $ϖ_{r} ⩾ 0$ and $\sum_{r = 1}^{n} ϖ_{r} = 1$ . To keep things simple, $Ω_{r}$ is used denote the power weight of $Θ_{r}$ . Then Eq. (13) can be re-written as: $\begin{array}{r} qROFIPWA (Θ_{1}, Θ_{2}, \dots, Θ_{n}) = {⨁^{˜}}_{r = 1}^{n} Ω_{r} Θ_{r} . \end{array}$ (14)
Theorem 2.
Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . Then the aggregated value qROFIPWA $(Θ_{1}, Θ_{2}, \dots, Θ_{n})$ is also a qROFN and $\begin{aligned} qROFIPWA (Θ_{1}, Θ_{2}, \dots, Θ_{n}) \\ = ⟨{(1 - \prod_{r = 1}^{n} {(1 - Δ_{r}^{q})}^{Ω_{r}})}^{\frac{1}{q}}, {(\prod_{r = 1}^{n} {(1 - Δ_{r}^{q})}^{Ω_{r}} - \prod_{r = 1}^{n} {(1 - Δ_{r}^{q} - \nabla_{r}^{q})}^{Ω_{r}})}^{\frac{1}{q}}⟩ . \end{aligned}$ (15)
Proof.
Straightforward. □

The following Theorems readily follow from Theorem 2.
Theorem 3 (Idempotency).

Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ with $Θ_{r} = Θ_{0} (r = 1 (1) n)$ . Then, qROFIPW $(Θ_{1}, Θ_{2}, \dots, Θ_{n}) = Θ_{0}$ .

Theorem 4 (Boundedness).

Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . If $Θ^{-} = ⟨ {min}_{r} Δ_{r}, \sqrt[q]{{max}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) - {min}_{r} Δ_{r}^{q}} ⟩$ and $Θ^{+} = ⟨ {max}_{r} Δ_{r}, ℏ ⟩$ , then we have $Θ^{-} ≺ qROFIPWA (Θ_{1}, Θ_{2}, \dots, Θ_{n}) ≺ Θ^{+}$ , where $\begin{array}{r} ℏ = \{\begin{array}{ll} 0, & if {min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) ⩽ {max}_{r} Δ_{r}^{q}, \\ \sqrt[q]{{min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) - {max}_{r} Δ_{r}^{q}}, & if {min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) ⩾ {max}_{r} Δ_{r}^{q} . \end{array} \end{array}$

Theorem 5 (Monotonicity).

Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩$ and $Θ_{r}^{'} = ⟨ Δ_{r}^{'}, \nabla_{r}^{'} ⟩ (r = 1 (1) n) \in Σ^{U}$ such that $Δ_{r} ⩽ Δ_{r}^{'}$ , $\nabla_{r} ⩾ \nabla_{r}^{'}$ . Then, $\begin{matrix} qROFIPWA (Θ_{1}, Θ_{2}, \dots, Θ_{n}) ≺ qROFIPWA (Θ_{1}^{'}, Θ_{2}^{'}, \dots, Θ_{n}^{'}) . \end{matrix}$

Definition 10.
Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . Then the qROFIPWAMSM operator is defined by: $\begin{array}{r} {qROFIPWAMSM}^{(p)} (Θ_{1}, Θ_{2}, \dots, Θ_{n}) = {(\frac{1}{^{n} c_{p}} ⨁_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (⨂_{j = 1}^{p} (n Ω_{t_{j}} Θ_{t_{j}})))}^{\frac{1}{p}}, \end{array}$ (16) where $t_{1}, t_{2}, \dots, t_{p} ⩾ 0$ , p is a parameter, $^{n} c_{p}$ stands for binomial coefficient, ( $t_{1}, t_{2}, \dots, t_{p}$ ) denotes a p-tuple combination of ( $1, 2, \dots, n$ ).

In Eq. (16), $Ω_{t_{j}} = \frac{ϖ_{t_{j}} (1 + ψ (Θ_{t_{j}}))}{\sum_{t = 1}^{n} ϖ_{t_{j}} (1 + ψ (Θ_{t_{j}}))}$ is called the power weight of $Θ_{t_{j}}$ , where $ϖ_{k}$ is the weight of $Θ_{k}$ satisfying $ϖ_{k} ⩾ 0$ and $\sum_{k = 1}^{n} ϖ_{k} = 1$ .
Theorem 6.
Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . Then the aggregated value ${qROFIPWAMSM}^{(p)} (Θ_{1}, Θ_{2}, \dots, Θ_{n})$ is also a qROFN and $\begin{aligned} {qROFIPWAMSM}^{(p)} (Θ_{1}, Θ_{2}, \dots, Θ_{n}) \\ = ⟨ ((1 - (\prod_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (1 - \prod_{j = 1}^{p} (1 - {(1 - {(Δ_{t_{j}})}^{q})}^{n Ω_{t_{j}}} \\ + {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}) + \prod_{j = 1}^{p} {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}))^{\frac{1}{^{n} c_{p}}} \\ + {(\prod_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (\prod_{j = 1}^{p} {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}))}^{\frac{1}{^{n} c_{p}}})^{\frac{1}{r}} \\ - {({(\prod_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (\prod_{j = 1}^{p} {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}))}^{\frac{1}{^{n} c_{p}}})}^{\frac{1}{p}})^{\frac{1}{q}}, \\ (1 - (1 - (\prod_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (1 - \prod_{j = 1}^{p} (1 - {(1 - {(Δ_{t_{j}})}^{q})}^{n Ω_{t_{j}}} \\ + {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}) + \prod_{j = 1}^{p} {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}))^{\frac{1}{^{n} c_{p}}} \\ + {(\prod_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (\prod_{j = 1}^{p} {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}))}^{\frac{1}{^{n} c_{p}}})^{\frac{1}{p}})^{\frac{1}{q}} ⟩ . \end{aligned}$ (17)
Proof.
Added in the Supplementary material. □

The following Theorems readily follow from Theorem 6. Theorem 7 (Idempotency).

For $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ with $Θ_{r} = Θ_{0} (r = 1 (1) n)$ , ${qROFIPWAMSM}^{(p)} (Θ_{1}, Θ_{2}, \dots, Θ_{n}) = Θ_{0}$ .

Theorem 8 (Boundedness).

Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . If $Θ^{-} = ⟨ {min}_{r} Δ_{r}, \sqrt[q]{{max}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) - {min}_{r} Δ_{r}^{q}} ⟩$ and $Θ^{+} = ⟨ {max}_{r} Δ_{r}, ℏ ⟩$ , then we have, $Θ^{-} ≺ qROFIPWAMSM (Θ_{1}, Θ_{2}, \dots, Θ_{n}) ≺ Θ^{+}$ , where $\begin{array}{r} ℏ = \{\begin{array}{ll} 0, & if {min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) ⩽ {max}_{r} Δ_{r}^{q}, \\ \sqrt[q]{{min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) - {max}_{r} Δ_{r}^{q}}, & if {min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) ⩾ {max}_{r} Δ_{r}^{q} . \end{array} \end{array}$

Theorem 9 (Monotonicity).

Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩$ and $Θ_{r}^{'} = ⟨ Δ_{r}^{'}, \nabla_{r}^{'} ⟩ (r = 1 (1) n) \in Σ^{U}$ such that $Δ_{r} ⩽ Δ_{r}^{'}$ , $\nabla_{r} ⩾ \nabla_{r}^{'}$ . Then, ${qROFIPAWMSM}^{(p)} (Θ_{1}, Θ_{2}, \dots, Θ_{n}) ≺ {qROFIPWAMSM}^{(p)} (Θ_{1}^{'}, Θ_{2}^{'}, \dots, Θ_{n}^{'})$ .

3.3 qROF Improved Power Weighted Geometric Operators

This paper develops qROF improved power weighted geometric (qROFIPWG) operator and qROF improved power weighted geometric MSM (qROFIPWGMSM) operator as follows:

Definition 11.
Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . Then the qROFIPWG operator is defined by: $\begin{array}{r} qROFIPWG (Θ_{1}, Θ_{2}, \dots, Θ_{n}) = {⨂^{˜}}_{r = 1}^{n} Θ_{r}^{Ω_{r}} . \end{array}$ (18)

In Eq. (18), $Ω_{r} = \frac{ϖ_{r} (1 + ψ (Θ_{r}))}{\sum_{r = 1}^{n} ϖ_{r} (1 + ψ (Θ_{r}))}$ is called the power weight of $Θ_{r}$ , where $ϖ_{r}$ is the weight of $Θ_{r}$ satisfying $ϖ_{r} ⩾ 0$ and $\sum_{r = 1}^{n} ϖ_{r} = 1$ .
Theorem 10.
Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . Then the aggregated value $qROFIPWG (Θ_{1}, Θ_{2}, \dots, Θ_{n})$ is also a qROFN and $\begin{aligned} qROFIPWG (Θ_{1}, Θ_{2}, \dots, Θ_{n}) \\ = ⟨{(\prod_{r = 1}^{n} {(1 - \nabla_{r}^{q})}^{Ω_{r}} - \prod_{r = 1}^{n} {(1 - Δ_{r}^{q} - \nabla_{r}^{q})}^{Ω_{r}})}^{\frac{1}{q}}, {(1 - \prod_{r = 1}^{n} {(1 - \nabla_{r}^{q})}^{Ω_{r}})}^{\frac{1}{q}}⟩ . \end{aligned}$ (19)
Proof.
Straightforward. □

The following Theorems readily follow from Theorem 10.
Theorem 11.
(Idempotency) Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ such that $Θ_{r} = Θ_{0} (r = 1 (1) n)$ , then we have $qROFIPWG (Θ_{1}, Θ_{2}, \dots, Θ_{n}) = Θ_{0}$ .
Theorem 12.
(Boundedness) Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . If $Θ^{-} = ⟨ {min}_{r} \nabla_{r}, \sqrt[q]{{max}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) - {min}_{r} \nabla_{r}^{q}} ⟩$ an $Θ^{+} = ⟨ {max}_{r} \nabla_{r}, ℏ ⟩$ , then we have $Θ^{-} ≺ qROFIPWG (Θ_{1}, Θ_{2}, \dots, Θ_{n}) ≺ Θ^{+}$ , where $\begin{array}{r} ℏ = \{\begin{array}{ll} 0, & if {min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) ⩽ {max}_{r} \nabla_{r}^{q}, \\ \sqrt[q]{{min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) - {max}_{r} \nabla_{r}^{q}}, & if {min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) ⩾ {max}_{r} \nabla_{r}^{q} . \end{array} \end{array}$
Theorem 13.
(Monotonicity) Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩$ and $Θ_{r}^{'} = ⟨ Δ_{r}^{'}, \nabla_{r}^{'} ⟩ (r = 1 (1) n) \in Σ^{U}$ such that $Δ_{r} ⩽ Δ_{r}^{'}$ , $\nabla_{r} ⩾ \nabla_{r}^{'}$ . Then, $qROFIPWG (Θ_{1}, Θ_{2}, \dots, Θ_{n}) ≺ qROFIPWG (Θ_{1}^{'}, Θ_{2}^{'}, \dots, Θ_{n}^{'})$ .
Definition 12.
Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . Then the qROFIPWGMSM operator is defined by: $\begin{array}{r} {qROFIPWGMSM}^{(p)} (Θ_{1}, Θ_{2}, \dots, Θ_{n}) = \frac{1}{p} {(\underset{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n}{⨂^{˜}} ({⨁^{˜}}_{j = 1}^{p} Θ_{t_{j}}^{Ω_{t_{j}}}))}^{\frac{1}{^{n} c_{p}}}, \end{array}$ (20) where $t_{1}, t_{2}, \dots, t_{p} ⩾ 0$ , p is a parameter, $^{n} c_{p}$ stands for binomial coefficient, ( $t_{1}, t_{2}, \dots, t_{p}$ ) denotes a p-tuple combination of ( $1, 2, \dots, n$ ).

In Eq. (20), $Ω_{t_{j}} = \frac{ϖ_{t_{j}} (1 + ψ (Θ_{t_{j}}))}{\sum_{t = 1}^{n} ϖ_{t_{j}} (1 + ψ (Θ_{t_{j}}))}$ is called the power weight of $Θ_{t_{j}}$ , where $ϖ_{k}$ is the weight of $Θ_{k}$ satisfying $ϖ_{k} ⩾ 0$ and $\sum_{k = 1}^{n} ϖ_{k} = 1$ .
Theorem 14.
Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . Then the aggregated value ${qROFIPWGMSM}^{(p)} (Θ_{1}, Θ_{2}, \dots, Θ_{n})$ is also a qROFN and $\begin{aligned} {qROFIPWGMSM}^{(p)} (Θ_{1}, Θ_{2}, \dots, Θ_{n}) \\ = ⟨ (1 - (1 - (\prod_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (1 - \prod_{j = 1}^{p} (1 - {(1 - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}} \\ + {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}) + \prod_{j = 1}^{p} {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}))^{\frac{1}{^{n} c_{p}}} \\ + {(\prod_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (\prod_{j = 1}^{p} {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}))}^{\frac{1}{^{n} c_{p}}})^{\frac{1}{p}})^{\frac{1}{q}}, \\ ((1 - (\prod_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (1 - \prod_{j = 1}^{p} (1 - {(1 - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}} \\ + {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}) + \prod_{j = 1}^{p} {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}))^{\frac{1}{^{n} c_{p}}} \\ + {(\prod_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (\prod_{j = 1}^{p} {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}))}^{\frac{1}{^{n} c_{p}}})^{\frac{1}{p}} \\ - {({(\prod_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (\prod_{j = 1}^{p} {(1 - {(Δ_{t_{j}})}^{q} - {(\nabla_{t_{j}})}^{q})}^{n Ω_{t_{j}}}))}^{\frac{1}{^{n} c_{p}}})}^{\frac{1}{p}})^{\frac{1}{q}} ⟩ . \end{aligned}$ (21)
Proof.
Similar to Theorem 6. □

The following Theorems readily follow from Theorem 14. Theorem 15.
(Idempotency) Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ such that $Θ_{r} = Θ_{0} (r = 1 (1) n)$ , then we have ${qROFIPWGMSM}^{(p)} (Θ_{1}, Θ_{2}, \dots, Θ_{n}) = Θ_{0}$ .
Theorem 16.
(Boundedness) Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩ (r = 1 (1) n) \in Σ^{U}$ . If $Θ^{-} = ⟨ {min}_{r} \nabla_{r}, \sqrt[q]{{max}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) - {min}_{r} \nabla_{r}^{q}} ⟩$ and $Θ^{+} = ⟨ {max}_{r} \nabla_{r}, ℏ ⟩$ , then we have $Θ^{-} ≺ {qROFIPWGMSM}^{(p)} (Θ_{1}, Θ_{2}, \dots, Θ_{n}) ≺ Θ^{+}$ , where $\begin{array}{r} ℏ = \{\begin{array}{ll} 0, & if {min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) ⩽ {max}_{r} \nabla_{r}^{q}, \\ \sqrt[q]{{min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) - {max}_{r} \nabla_{r}^{q}}, & if {min}_{r} (Δ_{r}^{q} + \nabla_{r}^{q}) ⩾ {max}_{r} \nabla_{r}^{q} . \end{array} \end{array}$
Theorem 17 (Monotonicity).

Let $Θ_{r} = ⟨ Δ_{r}, \nabla_{r} ⟩$ and $Θ_{r}^{'} = ⟨ Δ_{r}^{'}, \nabla_{r}^{'} ⟩ (r = 1 (1) n) \in Σ^{U}$ such that $Δ_{r} ⩽ Δ_{r}^{'}$ , $\nabla_{r} ⩾ \nabla_{r}^{'}$ . Then ${qROFIPWGMSM}^{(p)} (Θ_{1}, Θ_{2}, \dots, Θ_{n}) ≺ {qROFIPWGMSM}^{(p)} (Θ_{1}^{'}, Θ_{2}^{'}, \dots, Θ_{n}^{'})$ .

4 Group Decision Making Methodology

Suppose m different alternatives $X_{i} (i = 1 (1) m)$ need to be assessed over n distinct attributes $L_{j} (j = 1 (1) n)$ . Assume a set of l experts $D_{d} (d = 1 (1) l)$ with weights $η_{d} (d = 1 (1) l)$ with $η_{d} ⩾ 0$ and $\sum_{d = 1}^{l} η_{d} = 1$ for the assessment of considered alternatives. The initial assessment result of the expert $D_{d} (d = 1 (1) l)$ is specified in terms of qROFNs $Θ_{i j}^{(d)} = ⟨ Δ_{i j}^{(d)}, \nabla_{i j}^{(d)} ⟩$ subject to $0 ⩽ Δ_{i j}^{(d)}$ , $\nabla_{i j}^{(d)} ⩽ 1$ and $0 ⩽ {(Δ_{i j}^{(d)})}^{q} + {(\nabla_{i j}^{(d)})}^{q} ⩽ 1$ .

To find the best-suited alternative(s), the introduced operators are applied to propose a MCGDM methodology relating to the qROF data with the steps acquired as follows:

Step 1: The initial assessment results of experts are: $ℑ_{d} = {[Θ_{i j}^{(d)}]}_{m \times n} = {[⟨ Δ_{i j}^{(d)}, \nabla_{i j}^{(d)} ⟩]}_{m \times n} (d = 1 (1) l)$ .

Step 2: Normalize the decision matrices $ℑ_{d} = {[Θ_{i j}^{(d)}]}_{m \times n} (d = 1 (1) l)$ .

The Normalized decision matrix is: ${\tilde{ℑ}}_{d} = {[{\tilde{Θ}}_{i j}^{(d)}]}_{m \times n} = {[⟨ {\tilde{Δ}}_{i j}^{(d)}, {\tilde{\nabla}}_{i j}^{(d)} ⟩]}_{m \times n} (d = 1 (1) l)$ where: $\begin{array}{r} {\tilde{Θ}}_{i j}^{(d)} = \{\begin{array}{ll} ⟨ Δ_{i j}^{(d)}, \nabla_{i j}^{(d)} ⟩ & if C_{j} is of benefit-type, \\ ⟨ \nabla_{i j}^{(d)}, Δ_{i j}^{(d)} ⟩ & if C_{j} is of cost-type . \end{array} \end{array}$ (22) Step 3: Find $Supp ({\tilde{Θ}}_{i j}^{(d)}, {\tilde{Θ}}_{i j}^{(s)}) (d, s = 1 (1) l; d \neq s)$ based on the following formula: $\begin{array}{r} Supp ({\tilde{Θ}}_{i j}^{(d)}, {\tilde{Θ}}_{i j}^{(s)}) = 1 - Dist ({\tilde{Θ}}_{i j}^{(d)}, {\tilde{Θ}}_{i j}^{(s)}) (d, s = 1 (1) l; d \neq s), \end{array}$ (23) where $Dist ({\tilde{Θ}}_{i j}^{(d)}, {\tilde{Θ}}_{i j}^{(s)})$ is the Hamming distance between the qROFNs [20].

Step 4: Compute $ψ ({\tilde{Θ}}_{i j}^{(d)})$ by $\begin{array}{r} ψ ({\tilde{Θ}}_{i j}^{(d)}) = \sum_{s = 1, s \neq d}^{l} Supp ({\tilde{Θ}}_{i j}^{(d)}, {\tilde{Θ}}_{i j}^{(s)}) (i = 1 (1) m; j = 1 (1) n; d = 1 (1) l) . \end{array}$ (24) Step 5: Calculate the power weights $Ω_{i j}^{(d)} (i = 1 (1) m; j = 1 (1) n; d = 1 (1) l)$ associated with the qROFNs ${\tilde{Θ}}_{i j}^{(d)}$ by utilizing the weights $η_{d}$ of DEs $D_{d} (d = 1 (1) l)$ , where $\begin{array}{r} Ω_{i j}^{(d)} = \frac{η_{d} (1 + ψ ({\tilde{Θ}}_{i j}^{(d)}))}{\sum_{d = 1}^{l} η_{d} (1 + ψ ({\tilde{Θ}}_{i j}^{(d)}))} . \end{array}$ (25) Step 6: Construct aggregated normalized qROF decision matrix $ℑ * = {[Θ_{i j}]}_{m \times n} = {[⟨ Δ_{i j}, \nabla_{i j} ⟩]}_{m \times n}$ .

The operator $qROFIPWA$ or $qROFIPWG$ can be applied for aggregating normalized qROFNs. $\begin{aligned} qROFIPWA ({\tilde{Θ}}_{i j}^{(1)}, {\tilde{Θ}}_{i j}^{(2)}, \dots, {\tilde{Θ}}_{i j}^{(l)}) \\ = ⟨ {(1 - \prod_{d = 1}^{l} {(1 - {({\tilde{Δ}}_{i j}^{(d)})}^{q})}^{Ω_{i j}^{(d)}})}^{\frac{1}{q}}, \\ {(\prod_{d = 1}^{l} {(1 - {({\tilde{Δ}}_{i j}^{(d)})}^{q})}^{Ω_{i j}^{(d)}} - \prod_{d = 1}^{l} {(1 - {({\tilde{Δ}}_{i j}^{(d)})}^{q} - {({\tilde{\nabla}}_{i j}^{(d)})}^{q})}^{Ω_{i j}^{(d)}})}^{\frac{1}{q}} ⟩, \end{aligned}$ (26) $\begin{aligned} qROFIPWG ({\tilde{Θ}}_{i j}^{(1)}, {\tilde{Θ}}_{i j}^{(2)}, \dots, {\tilde{Θ}}_{i j}^{(l)}) \\ = ⟨ {(\prod_{d = 1}^{l} {(1 - {({\tilde{\nabla}}_{i j}^{(d)})}^{q})}^{Ω_{i j}^{(d)}} - \prod_{d = 1}^{l} {(1 - {({\tilde{Δ}}_{i j}^{(d)})}^{q}, - {({\tilde{\nabla}}_{i j}^{(d)})}^{q})}^{Ω_{i j}^{(d)}})}^{\frac{1}{q}}, \\ {(1 - \prod_{d = 1}^{l} {(1 - {({\tilde{\nabla}}_{i j}^{(d)})}^{q})}^{Ω_{i j}^{(d)}})}^{\frac{1}{q}} ⟩ . \end{aligned}$ (27) Step 7: Calculate the supports $Supp (Θ_{i j}, Θ_{i y}) (j, y = 1 (1) n; j \neq y)$ based on the following formula: $\begin{array}{r} Supp (Θ_{i j}, Θ_{i y}) = 1 - Dist (Θ_{i j}, Θ_{i y}) (j, y = 1 (1) n; j \neq y), \end{array}$ (28) where $Dist (Θ_{i j}, Θ_{i y})$ is the Hamming distance between the qROFNs (Liu et al., 2020).

Step 8: Compute the values $ψ (Θ_{i j})$ using the formula given by: $\begin{array}{r} ψ (Θ_{i j}) = \sum_{y = 1, y \neq j}^{n} Supp (Θ_{i j}, Θ_{i y}) (i = 1 (1) m; j = 1 (1) n) . \end{array}$ (29) Step 9: Calculate the power weights $Ω_{i j} (i = 1 (1) m; j = 1 (1) n)$ associated with the qROFNs $Θ_{i j}$ by utilizing the weights $η_{d}$ of DEs $D_{d} (d = 1 (1) l)$ , where $\begin{array}{r} Ω_{i j} = \frac{ϖ_{j} (1 + ψ (Θ_{i j}))}{\sum_{j = 1}^{n} ϖ_{j} (1 + ψ (Θ_{i j}))} (i = 1 (1) m; j = 1 (1) n) . \end{array}$ (30) Step 10: Construct the final aggregated qROF decision matrix $\hat{ℑ} = {[Θ_{i}]}_{m \times 1} = {[⟨ Δ_{i}, \nabla_{i} ⟩]}_{m \times 1}$ .

The final aggregated qROF decision matrix is constructed based on the $qROFIPWAMSM$ or $qROFIPWGMSM$ operator. $\begin{aligned} Θ_{i} & = {qROFIPWAMSM}^{(p)} (Θ_{i 1}, Θ_{i 2}, \dots, Θ_{i n}) \\ = {(\frac{1}{^{n} c_{p}} ⨁_{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n} (⨂_{j = 1}^{p} (n Ω_{i t_{j}} Θ_{i t_{j}})))}^{\frac{1}{p}}, \end{aligned}$ (31) $\begin{aligned} Θ_{i} & = {qROFIPWGMSM}^{(p)} (Θ_{i 1}, Θ_{i 2}, \dots, Θ_{i n}) \\ = \frac{1}{p} {(\underset{1 ⩽ t_{1} < t_{2} < \dots < t_{p} ⩽ n}{⨂^{˜}} ({⨁^{˜}}_{j = 1}^{p} Θ_{i t_{j}}^{n Ω_{i t_{j}}}))}^{\frac{1}{^{n} c_{p}}} . \end{aligned}$ (32) Step 11: Estimate the score values of $Θ_{i} (i = (1) m)$ by utilizing Definition 2.

If two score values $S_{c} (Θ_{i})$ and $S_{c} (Θ_{u})$ are same, then accuracy values (Definition 3) should be computed.

Step 12: Obtain the priority order of alternatives $A_{i} (i = 1 (1) m)$ indicated by the Definition 4 and subsequently choose the optimal one.

5 Application of the Proposed Methodology

5.1 Problem Description

Personnel selection plays a significant role for tracking down the adequate information quality for an organization/industry. Personnel selection is the most common way of picking the people who match the capabilities needed to play out a characterized work in the most ideal manner. A personnel selection problem can be viewed as a MCGDM problem due to the fact that a group of experts and many attributes are considered in the selection process of suitable personnel. qROFS theory can be considered as an essential tool to provide an efficient decision framework to tackle personnel selection problems. Now, let’s think about an Engineering Institute (Under Graduate level), which desires to appoint a Placement officer for ‘Training and Placement Cell’. Suppose five candidates $X_{i}$ $(i = 1 (1) 5)$ are shortlisted for personal interview based on their scores of written tests. A team of three experts (Principal, Director and HR manager) is formed to assess the five candidates on the grounds of industry experience ( $L_{1}$ ), communication skill ( $L_{2}$ ), networking skill ( $L_{3}$ ), and academic qualifications ( $L_{4}$ ).

5.2 Problem Solution

Step 1: Present the initial assessments of each expert as: $ℑ_{d} = {[Θ_{i j}^{(d)}]}_{5 \times 4} = {[⟨ Δ_{i j}^{(d)}, \nabla_{i j}^{(d)} ⟩]}_{5 \times 4} (d = 1 (1) 3)$ (Table 1).

Table 1
Initial assessment results of the experts.

Expert Alternative $L_{1}$ $L_{2}$ $L_{3}$ $L_{4}$

$D_{1}$ $X_{1}$ $⟨ 0.2, 0.6 ⟩$ $⟨ 0.4, 0.6 ⟩$ $⟨ 0.4, 0.3 ⟩$ $⟨ 0.5, 0.6 ⟩$

$X_{2}$ $⟨ 0.6, 0.5 ⟩$ $⟨ 0.6, 0.5 ⟩$ $⟨ 0.5, 0.4 ⟩$ $⟨ 0.5, 0.2 ⟩$

$X_{3}$ $⟨ 0.8, 0.2 ⟩$ $⟨ 0.5, 0.2 ⟩$ $⟨ 0.5, 0.3 ⟩$ $⟨ 0.4, 0.3 ⟩$

$X_{4}$ $⟨ 0.5, 0.6 ⟩$ $⟨ 0.3, 0.5 ⟩$ $⟨ 0.5, 0.2 ⟩$ $⟨ 0.5, 0.2 ⟩$

$X_{5}$ $⟨ 0.5, 0.3 ⟩$ $⟨ 0.4, 0.7 ⟩$ $⟨ 0.6, 0.4 ⟩$ $⟨ 0.6, 0.6 ⟩$

$X_{1}$ $⟨ 0.4, 0.6 ⟩$ $⟨ 0.2, 0.2 ⟩$ $⟨ 0.5, 0.4 ⟩$ $⟨ 0.4, 0.6 ⟩$

$D_{2}$ $X_{2}$ $⟨ 0.5, 0.1 ⟩$ $⟨ 0.6, 0.4 ⟩$ $⟨ 0.5, 0.5 ⟩$ $⟨ 0.4, 0.3 ⟩$

$X_{3}$ $⟨ 0.7, 0.3 ⟩$ $⟨ 0.4, 0.2 ⟩$ $⟨ 0.4, 0.1 ⟩$ $⟨ 0.5, 0.4 ⟩$

$X_{4}$ $⟨ 0.5, 0.4 ⟩$ $⟨ 0.5, 0.7 ⟩$ $⟨ 0.5, 0.6 ⟩$ $⟨ 0.3, 0.8 ⟩$

$X_{5}$ $⟨ 0.6, 0.4 ⟩$ $⟨ 0.3, 0.3 ⟩$ $⟨ 0.6, 0.3 ⟩$ $⟨ 0.4, 0.2 ⟩$

$X_{1}$ $⟨ 0.7, 0.7 ⟩$ $⟨ 0.5, 0.4 ⟩$ $⟨ 0.2, 0.4 ⟩$ $⟨ 0.4, 0.6 ⟩$

$D_{3}$ $X_{2}$ $⟨ 0.4, 0.2 ⟩$ $⟨ 0.5, 0.4 ⟩$ $⟨ 0.6, 0.3 ⟩$ $⟨ 0.5, 0.1 ⟩$

$X_{3}$ $⟨ 0.5, 0.3 ⟩$ $⟨ 0.4, 0.2 ⟩$ $⟨ 0.4, 0.3 ⟩$ $⟨ 0.6, 0.4 ⟩$

$X_{4}$ $⟨ 0.3, 0.5 ⟩$ $⟨ 0.5, 0.4 ⟩$ $⟨ 0.5, 0.2 ⟩$ $⟨ 0.8, 0.2 ⟩$

$X_{5}$ $⟨ 0.4, 0.6 ⟩$ $⟨ 0.6, 0.3 ⟩$ $⟨ 0.4, 0.4 ⟩$ $⟨ 0.6, 0.1 ⟩$

Expert	Alternative	$L_{1}$	$L_{2}$	$L_{3}$	$L_{4}$
$D_{1}$	$X_{1}$	$⟨ 0.2, 0.6 ⟩$	$⟨ 0.4, 0.6 ⟩$	$⟨ 0.4, 0.3 ⟩$	$⟨ 0.5, 0.6 ⟩$
	$X_{2}$	$⟨ 0.6, 0.5 ⟩$	$⟨ 0.6, 0.5 ⟩$	$⟨ 0.5, 0.4 ⟩$	$⟨ 0.5, 0.2 ⟩$
	$X_{3}$	$⟨ 0.8, 0.2 ⟩$	$⟨ 0.5, 0.2 ⟩$	$⟨ 0.5, 0.3 ⟩$	$⟨ 0.4, 0.3 ⟩$
	$X_{4}$	$⟨ 0.5, 0.6 ⟩$	$⟨ 0.3, 0.5 ⟩$	$⟨ 0.5, 0.2 ⟩$	$⟨ 0.5, 0.2 ⟩$
	$X_{5}$	$⟨ 0.5, 0.3 ⟩$	$⟨ 0.4, 0.7 ⟩$	$⟨ 0.6, 0.4 ⟩$	$⟨ 0.6, 0.6 ⟩$
	$X_{1}$	$⟨ 0.4, 0.6 ⟩$	$⟨ 0.2, 0.2 ⟩$	$⟨ 0.5, 0.4 ⟩$	$⟨ 0.4, 0.6 ⟩$
$D_{2}$	$X_{2}$	$⟨ 0.5, 0.1 ⟩$	$⟨ 0.6, 0.4 ⟩$	$⟨ 0.5, 0.5 ⟩$	$⟨ 0.4, 0.3 ⟩$
	$X_{3}$	$⟨ 0.7, 0.3 ⟩$	$⟨ 0.4, 0.2 ⟩$	$⟨ 0.4, 0.1 ⟩$	$⟨ 0.5, 0.4 ⟩$
	$X_{4}$	$⟨ 0.5, 0.4 ⟩$	$⟨ 0.5, 0.7 ⟩$	$⟨ 0.5, 0.6 ⟩$	$⟨ 0.3, 0.8 ⟩$
	$X_{5}$	$⟨ 0.6, 0.4 ⟩$	$⟨ 0.3, 0.3 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.4, 0.2 ⟩$
	$X_{1}$	$⟨ 0.7, 0.7 ⟩$	$⟨ 0.5, 0.4 ⟩$	$⟨ 0.2, 0.4 ⟩$	$⟨ 0.4, 0.6 ⟩$
$D_{3}$	$X_{2}$	$⟨ 0.4, 0.2 ⟩$	$⟨ 0.5, 0.4 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.5, 0.1 ⟩$
	$X_{3}$	$⟨ 0.5, 0.3 ⟩$	$⟨ 0.4, 0.2 ⟩$	$⟨ 0.4, 0.3 ⟩$	$⟨ 0.6, 0.4 ⟩$
	$X_{4}$	$⟨ 0.3, 0.5 ⟩$	$⟨ 0.5, 0.4 ⟩$	$⟨ 0.5, 0.2 ⟩$	$⟨ 0.8, 0.2 ⟩$
	$X_{5}$	$⟨ 0.4, 0.6 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.4, 0.4 ⟩$	$⟨ 0.6, 0.1 ⟩$

For each of the remaining steps, $q = 2$ is taken since the least value of q that satisfies ${(Δ_{i j}^{(d)})}^{q} + {(\nabla_{i j}^{(d)})}^{q} ⩽ 1$ is ‘2’.

Step 2: Since all the criteria are of benefit type, normalization is not required. Hence, $ℑ_{d} = {[Θ_{i j}^{(d)}]}_{5 \times 4} = {[⟨ Δ_{i j}^{(d)}, \nabla_{i j}^{(d)} ⟩]}_{5 \times 4} = {[⟨ {\tilde{Δ}}_{i j}^{(d)}, {\tilde{\nabla}}_{i j}^{(d)} ⟩]}_{5 \times 4} = {[{\tilde{Θ}}_{i j}^{(d)}]}_{5 \times 4} = {\tilde{ℑ}}_{d}$ ( $d = 1 (1) l$ ).

Step 3: The supports are calculated as $Supp ({\tilde{Θ}}_{i j}^{(d)}, {\tilde{Θ}}_{i j}^{(s)})$ ( $d, s = 1 (1) l; d \neq s$ ) using Eq. (23). For sake of simplicity, $S_{d s} (d \neq s; d, s = 1 (1) 3)$ is used here to represent $Supp ({\tilde{Θ}}_{i j}^{(d)}, {\tilde{Θ}}_{i j}^{(s)})$ ( $d, s = 1 (1) l; d \neq s$ ) and, consequently, the following matrices are obtained: $\begin{aligned} {[S_{12}]}_{5 \times 4} = {[S_{21}]}_{5 \times 4} = [\begin{array}{cccc} 0.88 & 0.56 & 0.84 & 0.91 \\ 0.65 & 0.91 & 0.91 & 0.91 \\ 0.85 & 0.91 & 0.83 & 0.84 \\ 0.8 & 0.6 & 0.68 & 0.4 \\ 0.82 & 0.53 & 0.93 & 0.48 \end{array}], \\ {[S_{13}]}_{5 \times 4} = {[S_{31}]}_{5 \times 4} = [\begin{array}{cccc} 0.42 & 0.8 & 0.88 & 0.91 \\ 0.59 & 0.8 & 0.89 & 0.97 \\ 0.61 & 0.91 & 0.91 & 0.73 \\ 0.73 & 0.84 & 1 & 0.61 \\ 0.73 & 0.6 & 0.8 & 0.65 \end{array}], \\ {[S_{23}]}_{5 \times 4} = {[S_{32}]}_{5 \times 4} = [\begin{array}{cccc} 0.54 & 0.67 & 0.79 & 1 \\ 0.91 & 0.89 & 0.84 & 0.91 \\ 0.76 & 1 & 0.92 & 0.89 \\ 0.84 & 0.67 & 0.68 & 0.4 \\ 0.8 & 0.73 & 0.8 & 0.8 \end{array}] . \end{aligned}$ Step 4: According to Eq. (24), the values $ψ ({\tilde{Θ}}_{i j}^{(d)})$ ( $i = 1 (1) 5$ ; $j = 1 (1) 4$ ; $d = 1 (1) 3$ ) are calculated as given by the following matrices: $\begin{aligned} {[ψ ({\tilde{Θ}}_{i j}^{(1)})]}_{5 \times 4} = [\begin{array}{cccc} 1.3 & 1.36 & 1.72 & 1.82 \\ 1.24 & 1.71 & 1.8 & 1.88 \\ 1.46 & 1.82 & 1.74 & 1.57 \\ 1.53 & 1.44 & 1.68 & 1.01 \\ 1.55 & 1.13 & 1.73 & 1.13 \end{array}], \\ {[ψ ({\tilde{Θ}}_{i j}^{(2)})]}_{5 \times 4} = [\begin{array}{cccc} 1.42 & 1.23 & 1.63 & 1.91 \\ 1.56 & 1.8 & 1.75 & 1.82 \\ 1.61 & 1.91 & 1.75 & 1.73 \\ 1.64 & 1.27 & 1.36 & 0.8 \\ 1.62 & 1.26 & 1.73 & 1.28 \end{array}], \\ {[ψ ({\tilde{Θ}}_{i j}^{(3)})]}_{5 \times 4} = [\begin{array}{cccc} 0.96 & 1.47 & 1.67 & 1.91 \\ 1.5 & 1.69 & 1.73 & 1.88 \\ 1.37 & 1.91 & 1.83 & 1.62 \\ 1.57 & 1.51 & 1.68 & 1.01 \\ 1.53 & 1.33 & 1.6 & 1.45 \end{array}] . \end{aligned}$ Step 5: According to Eq. (25), the weights $η_{d} (d = 1 (1) 3)$ of DEs are utilized to calculate the power weights $Ω_{i j}^{(d)}$ ( $i = 1 (1) 5$ ; $j = 1 (1) 4$ ; $d = 1 (1) 3$ ) associated with the qROFNs and the following matrices are obtained: $\begin{aligned} {[Ω_{i j}^{(1)}]}_{5 \times 4} = [\begin{array}{cccc} 0.355722 & 0.353671 & 0.356354 & 0.342887 \\ 0.322236 & 0.346041 & 0.354751 & 0.352941 \\ 0.344746 & 0.342887 & 0.346647 & 0.339883 \\ 0.342685 & 0.357397 & 0.367555 & 0.365265 \\ 0.346871 & 0.334005 & 0.354217 & 0.328414 \end{array}], \\ {[Ω_{i j}^{(2)}]}_{5 \times 4} = [\begin{array}{cccc} 0.427751 & 0.381931 & 0.393786 & 0.404378 \\ 0.420879 & 0.408609 & 0.398190 & 0.394958 \\ 0.418018 & 0.404378 & 0.397614 & 0.412620 \\ 0.408669 & 0.379996 & 0.369906 & 0.373832 \\ 0.407307 & 0.405018 & 0.404819 & 0.401762 \end{array}], \\ {[Ω_{i j}^{(3)}]}_{5 \times 4} = [\begin{array}{cccc} 0.216527 & 0.264397 & 0.249859 & 0.252736 \\ 0.256884 & 0.245348 & 0.247059 & 0.252101 \\ 0.237237 & 0.252736 & 0.255738 & 0.247497 \\ 0.248645 & 0.262607 & 0.262539 & 0.260903 \\ 0.245822 & 0.260977 & 0.240964 & 0.269824 \end{array}] . \end{aligned}$ Step 6: According to the qROFIPWA operator expressed by Eq. (26), the matrices ${\tilde{ℑ}}_{d} = {[{\tilde{Θ}}_{i j}^{(d)}]}_{5 \times 4} (d = 1 (1) 3)$ are aggregated (taking $q = 2$ ) to form an integrated decision matrix $ℑ * = {[Θ_{i j}]}_{5 \times 4}$ , as shown in the following Table 2.

Step 7: The supports are calculated as $Supp (Θ_{i j}, Θ_{i y}) (j, y = 1 (1) 4$ ; ( $j \neq y$ ) using Eq. (28). For sake of simplicity, the symbol $S^{j y} (j \neq y; j, y = 1 (1) 4)$ is used to represent $Supp (Θ_{i j}, Θ_{i y})$ ( $j, y = 1 (1) 4$ ; $j \neq y$ ) and the following values are obtained: $\begin{aligned} S^{12} = S^{21} = (0.612624, 0.784901, 0.535690, 0.842471, 0.909825), \\ S^{13} = S^{31} = (0.639889, 0.840685, 0.556273, 0.931132, 0.815082), \\ S^{14} = S^{41} = (0.662497, 0.784869, 0.565558, 0.926220, 0.896442), \\ S^{23} = S^{32} = (0.934186, 0.843704, 0.847702, 0.842471, 0.815082), \\ S^{24} = S^{42} = (0.781172, 0.716582, 0.789510, 0.842471, 0.896442), \\ S^{34} = S^{43} = (0.808437, 0.772366, 0.810093, 0.846851, 0.815082) . \end{aligned}$ Step 8: According to Eq. (29) the values $ψ (Θ_{i j})$ ( $i = 1 (1) 5$ ; $j = 1 (1) 4$ ) are calculated, as presented in the following matrix: $\begin{array}{r} ψ = [\begin{array}{cccc} 1.915011 & 2.327982 & 2.382513 & 2.252106 \\ 2.410456 & 2.345187 & 2.456756 & 2.273818 \\ 1.657522 & 2.172903 & 2.214069 & 2.165161 \\ 2.699824 & 2.527413 & 2.620454 & 2.615542 \\ 2.621349 & 2.621349 & 2.445245 & 2.607966 \end{array}] . \end{array}$ Step 9: The power weights $Ω_{i j}$ ( $i = 1 (1) 5$ ; $j = 1 (1) 4$ ) are calculated using Eq. (30). These values are presented in the following matrix: $\begin{array}{r} Ω = [\begin{array}{cccc} 0.1804 & 0.1030 & 0.3140 & 0.4026 \\ 0.2028 & 0.0995 & 0.3083 & 0.3894 \\ 0.1726 & 0.1030 & 0.3131 & 0.4112 \\ 0.2041 & 0.0973 & 0.2996 & 0.3990 \\ 0.2033 & 0.1016 & 0.2901 & 0.4050 \end{array}] . \end{array}$ Step 10: Based on the qROFIPWAMSM operator expressed by Eq. (31), the final aggregated qROFNs are derived (taking $q = 2$ , $r = 2$ ), as given by: $\begin{aligned} Θ_{1} = ⟨ 0.44483774, 0.564039033 ⟩, \\ Θ_{2} = ⟨ 0.509610528, 0.351422694 ⟩, \\ Θ_{3} = ⟨ 0.532907336, 0.302081533 ⟩, \\ Θ_{4} = ⟨ 0.531043417, 0.491528853 ⟩, \\ Θ_{5} = ⟨ 0.536489152, 0.414240749 ⟩ . \end{aligned}$ Step 11: The scores $V_{i} = V (Θ_{i}) (i = 1 (1) 5)$ are calculated by utilizing Eq. (1), as follows: $\begin{array}{r} V_{1} = - 0.1202, V_{2} = 0.1362, V_{3} = 0.1927, V_{4} = 0.0404, V_{5} = 0.1162. \end{array}$ Step 12: Since $V_{3} > V_{2} > V_{5} > V_{4} > V_{1}$ , the priority order is $X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$ , hence, the most suitable alternative is $X_{3}$ .

Table 2

Aggregated normalized decision matrix.

Alternative	$L_{1}$	$L_{2}$	$L_{3}$	$L_{4}$
$X_{1}$	$⟨ 0.457546, 0.727680 ⟩$	$⟨ 0.377018, 0.456022 ⟩$	$⟨ 0.411592, 0.370298 ⟩$	$⟨ 0.438196, 0.600809 ⟩$
$X_{2}$	$⟨ 0.516059, 0.345696 ⟩$	$⟨ 0.578450, 0.442128 ⟩$	$⟨ 0.528034, 0.422266 ⟩$	$⟨ 0.464399, 0.226244 ⟩$
$X_{3}$	$⟨ 0.710191, 0.264441 ⟩$	$⟨ 0.438196, 0.200154 ⟩$	$⟨ 0.438588, 0.246261 ⟩$	$⟨ 0.500551, 0.375744 ⟩$
$X_{4}$	$⟨ 0.461582, 0.510394 ⟩$	$⟨ 0.443096, 0.594864 ⟩$	$⟨ 0.5, 0.425597 ⟩$	$⟨ 0.578171, 0.513749 ⟩$
$X_{5}$	$⟨ 0.526362, 0.432299 ⟩$	$⟨ 0.437910, 0.502261 ⟩$	$⟨ 0.562724, 0.362961 ⟩$	$⟨ 0.534898, 0.427268 ⟩$

If the proposed qROFIPWG operator is applied in Step 6 and the proposed qROFIPWGMSM operator is applied in Step 10, then the following values are obtained: $\begin{array}{r} V_{1} = - 0.0788, V_{2} = 0.1435, V_{3} = 0.1823, V_{4} = - 0.0452, V_{5} = 0.1156. \end{array}$

Since $V_{3} > V_{2} > V_{5} > V_{4} > V_{1}$ , the priority order of the alternatives is $X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$ , hence, the optimal choice is $X_{3}$ .

5.3 Effects of the Parameter ‘p’ on Ranking Orders

Table 3
Effects ofthe parameter p when the operators qROFIPWA and qROFIPWAMSM are used.

Parameter Score value Ranking order

$p = 1$ $V_{1} = - 0.1497$ , $V_{2} = 0.1332$ , $V_{3} = 0.1849$ , $V_{4} = 0.0222$ , $V_{5} = 0.1092$ $X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$

$p = 2$ $V_{1} = - 0.1202$ , $V_{2} = 0.1362$ , $V_{3} = 0.1927$ , $V_{4} = 0.0404$ , $V_{5} = 0.1162$ $X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$

$p = 3$ $V_{1} = - 0.1040$ , $V_{2} = 0.1388$ , $V_{3} = 0.2002$ , $V_{4} = 0.0579$ , $V_{5} = 0.1242$ $X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$

$p = 4$ $V_{1} = - 0.0641$ , $V_{2} = 0.0307$ , $V_{3} = 0.0484$ , $V_{4} = - 0.0109$ , $V_{5} = 0.0199$ $X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$

Parameter	Score value	Ranking order
$p = 1$	$V_{1} = - 0.1497$ , $V_{2} = 0.1332$ , $V_{3} = 0.1849$ , $V_{4} = 0.0222$ , $V_{5} = 0.1092$	$X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$
$p = 2$	$V_{1} = - 0.1202$ , $V_{2} = 0.1362$ , $V_{3} = 0.1927$ , $V_{4} = 0.0404$ , $V_{5} = 0.1162$	$X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$
$p = 3$	$V_{1} = - 0.1040$ , $V_{2} = 0.1388$ , $V_{3} = 0.2002$ , $V_{4} = 0.0579$ , $V_{5} = 0.1242$	$X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$
$p = 4$	$V_{1} = - 0.0641$ , $V_{2} = 0.0307$ , $V_{3} = 0.0484$ , $V_{4} = - 0.0109$ , $V_{5} = 0.0199$	$X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$

Here, all possible values of p are considered in the proposed MCGDM technique to get the solution of the case study, as discussed in Section 5.1 (taking $q = 2$ ). To illustrate the impact of ‘p’ upon priority order, qROFIPWA operator is used in Step 6 and the proposed qROFIPWAMSM operator is used in Step 10. The related score values of alternatives and their priority position for various values of ‘p’ (taking $q = 2$ ) are presented in Table 3. To illustrate the effect of ‘p’ upon priority order, qROFIPWG operator is utilized in Step 6 and the proposed qROFIPWGMSM operator is used in Step 10. The related score values of alternatives and their priority position for various values of ‘p’ (taking $q = 2$ ) are presented in Table 4. With the increasing value of p increases, the priority order of alternatives changes in couple of cases due to the fact that the developed methodology considers interrelationships among criteria, but the best alternative (A₃) remains unaltered for any value of p when $q = 2$ . For the case study presented in Section 5.1, four criteria are considered. So, maximum possible integral value of p is 4. When $p = 1$ , all the criteria are independent. For $p = 2$ , pairs of criteria are dependent, and for $p = 3$ , any of the three criteria will be interrelated. But for $p = 4$ , all the four criteria will be dependent. Depending on the given number of dependent criteria, expert/decision-maker will choose appropriate value of the parameter p.

Table 4

Effects ofthe parameter p when the operators qROFIPWG and qROFIPWGMSM are used.

Parameter	Score value	Ranking order
$p = 1$	$V_{1} = 0.0173$ , $V_{2} = 0.0043$ , $V_{3} = 0.0014$ , $V_{4} = 0.0020$ , $V_{5} = - 0.0017$	$X_{1} ≻ X_{2} > X_{4} > X_{3} > X_{5}$
$p = 2$	$V_{1} = - 0.0788$ , $V_{2} = 0.1435$ , $V_{3} = 0.1823$ , $V_{4} = - 0.0452$ , $V_{5} = 0.1155$	$X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$
$p = 3$	$V_{1} = - 0.1772$ , $V_{2} = 0.0349$ , $V_{3} = 0.1132$ , $V_{4} = - 0.1631$ , $V_{5} = 0.0176$	$X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$
$p = 4$	$V_{1} = - 0.1280$ , $V_{2} = 0.0609$ , $V_{3} = 0.0883$ , $V_{4} = - 0.0983$ , $V_{5} = 0.0538$	$X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$

5.4 Comparative Analysis with Existing Methods

To verify the effectiveness of our developed methodology based on the developed operators, an investigation has been conducted for the purpose of comparison between the existing methods of Jana et al. (2019b) and qROF Dombi weighted averaging (qROFDWA) operator; Wei et al. (2018) and qROF generalized weighted Heronian mean (qROFGWHM) operator and qROF generalized weighted geometric Heronian mean (qROFGWGHM) operator; Liu and Liu (2018) and qROF weighted Bonferroni mean (qROFWBM) operator; Yang and Pang (2020) and qROF weighted Bonferroni Dombi averaging (qROFWBMDA) operator; Liu and Wang (2018) and qROF weighted averaging (qROFWA) operator; Garg and Chen (2020) and qROF weighted neutrality (qROFWN) operator, and Liu et al. (2020) with qROF power weighted MSM (qROFPWMSM) operator. These methods are applied to the same case study presented at the beginning of Section 5. In Table 5, priority values of the considered alternatives are presented along with their ranking order. From Table 5, it is found that the ranking order obtained by our proposed method is exactly the same as obtained by other existing methods (Liu and Liu, 2018; Liu and Wang, 2018; Wei et al., 2018; Jana et al., 2019b; Yang and Pang, 2020; Garg and Chen, 2020; Liu et al., 2020). Hence, the developed methodology based on the proposed operators is effective and feasible.

Table 5
Comparison: existing vs. proposed (taking $q = 2$ ).

Method Score value Ranking order

Jana et al. (2019b) with qROFDWA operator $V_{1} = - 0.0212$ , $V_{2} = 0.1885$ , $V_{3} = 0.2743$ , $V_{4} = 0.0522$ , $V_{5} = 0.1233$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Wei et al. (2018) with qROFGWHM operator $V_{1} = - 0.2942$ , $V_{2} = - 0.0703$ , $V_{3} = - 0.0272$ , $V_{4} = - 0.1913$ , $V_{5} = - 0.1324$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Wei et al. (2018) with qROFGWGHM operator $V_{1} = 0.0884$ , $V_{2} = 0.3162$ , $V_{3} = 0.3317$ , $V_{4} = 0.2660$ , $V_{5} = 0.3294$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Liu and Liu (2018) with qROFWBM operator $V_{1} = - 0.7144$ , $V_{2} = - 0.5922$ , $V_{3} = - 0.5780$ , $V_{4} = - 0.6416$ , $V_{5} = - 6163$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Yang and Pang (2020) with qROFWBMDA operator $V_{1} = - 0.4993$ , $V_{2} = - 0.2204$ , $V_{3} = - 0.0846$ , $V_{4} = - 0.4227$ , $V_{5} = - 0.2986$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Liu and Wang (2018) with qROFWA operator $V_{1} = - 0.0919$ , $V_{2} = 0.1568$ , $V_{3} = 0.2051$ , $V_{4} = 0.0309$ , $V_{5} = 0.1130$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Garg and Chen (2020) with qROFWNA operator $V_{1} = 0.5931$ , $V_{2} = 0.7337$ , $V_{3} = 0.7525$ , $V_{4} = 0.6783$ , $V_{5} = 0.7411$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Liu et al. (2020) with qROFPWMSM operator $V_{1} = - 0.1154$ , $V_{2} = 0.1143$ , $V_{3} = 0.1656$ , $V_{4} = 0.0348$ , $V_{5} = 0.0934$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Proposed method with qROFIPWA operator and qROFIPWAMSM operator $V_{1} = - 0.1202$ , $V_{2} = 0.1362$ , $V_{3} = 0.1927$ , $V_{4} = 0.0404$ , $V_{5} = 0.1162$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Proposed method with qROFIPWG operator and qROFIPWGMSM operator $V_{1} = - 0.0788$ , $V_{2} = 0.1435$ , $V_{3} = 0.1823$ , $V_{4} = - 0.0452$ , $V_{5} = 0.1156$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Method	Score value	Ranking order
Jana et al. (2019b) with qROFDWA operator	$V_{1} = - 0.0212$ , $V_{2} = 0.1885$ , $V_{3} = 0.2743$ , $V_{4} = 0.0522$ , $V_{5} = 0.1233$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Wei et al. (2018) with qROFGWHM operator	$V_{1} = - 0.2942$ , $V_{2} = - 0.0703$ , $V_{3} = - 0.0272$ , $V_{4} = - 0.1913$ , $V_{5} = - 0.1324$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Wei et al. (2018) with qROFGWGHM operator	$V_{1} = 0.0884$ , $V_{2} = 0.3162$ , $V_{3} = 0.3317$ , $V_{4} = 0.2660$ , $V_{5} = 0.3294$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Liu and Liu (2018) with qROFWBM operator	$V_{1} = - 0.7144$ , $V_{2} = - 0.5922$ , $V_{3} = - 0.5780$ , $V_{4} = - 0.6416$ , $V_{5} = - 6163$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Yang and Pang (2020) with qROFWBMDA operator	$V_{1} = - 0.4993$ , $V_{2} = - 0.2204$ , $V_{3} = - 0.0846$ , $V_{4} = - 0.4227$ , $V_{5} = - 0.2986$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Liu and Wang (2018) with qROFWA operator	$V_{1} = - 0.0919$ , $V_{2} = 0.1568$ , $V_{3} = 0.2051$ , $V_{4} = 0.0309$ , $V_{5} = 0.1130$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Garg and Chen (2020) with qROFWNA operator	$V_{1} = 0.5931$ , $V_{2} = 0.7337$ , $V_{3} = 0.7525$ , $V_{4} = 0.6783$ , $V_{5} = 0.7411$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Liu et al. (2020) with qROFPWMSM operator	$V_{1} = - 0.1154$ , $V_{2} = 0.1143$ , $V_{3} = 0.1656$ , $V_{4} = 0.0348$ , $V_{5} = 0.0934$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Proposed method with qROFIPWA operator and qROFIPWAMSM operator	$V_{1} = - 0.1202$ , $V_{2} = 0.1362$ , $V_{3} = 0.1927$ , $V_{4} = 0.0404$ , $V_{5} = 0.1162$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Proposed method with qROFIPWG operator and qROFIPWGMSM operator	$V_{1} = - 0.0788$ , $V_{2} = 0.1435$ , $V_{3} = 0.1823$ , $V_{4} = - 0.0452$ , $V_{5} = 0.1156$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

5.5 Comparative Analysis Based on Biasness of Experts

When evaluating alternatives in a realistic decision-making environment, experts may attempt to manipulate some initial data due to an inclination or biasness toward a particular alternative. As a result, the ranking order of alternatives may change. To reflect the actual situation, the case study presented in Section 5.1 must be modified in order to demonstrate the biased nature of experts. Assume that expert $D_{2}$ prefers alternative $X_{2}$ and has some reservations about alternative $X_{3}$ to an extent that the criteria value ${\tilde{Θ}}_{31}^{(2)}$ changes to $⟨ 0.1, 0.1 ⟩$ from $⟨ 0.7, 0.3 ⟩$ and the criteria value ${\tilde{Θ}}_{24}^{(2)}$ changes to $⟨ 0.4, 0.2 ⟩$ from $⟨ 0.4, 0.3 ⟩$ due to biased nature of the expert D₂. The remaining assessment values remain the same as shown in Tables 1. The outcomes from various existing methods are recorded in Table 6 (for $q = 2$ ).

Table 6
Comparison: existing vs. proposed (taking $q = 2$ ).

Method Score value Ranking order

Jana et al. (2019b) with qROFDWA operator $V_{1} = - 0.0343$ , $V_{2} = 0.2170$ , $V_{3} = 0.2042$ , $V_{4} = 0.0133$ , $V_{5} = 0.1445$ $X_{2} ≻ X_{3} ≻ X_{5} ≻ X_{1} ≻ X_{4}$

Wei et al. (2018) with qROFGWHM operator $V_{1} = - 0.2538$ , $V_{2} = - 0.0407$ , $V_{3} = - 0.0642$ , $V_{4} = - 0.2449$ , $V_{5} = - 0.1066$ $X_{2} ≻ X_{3} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Wei et al. (2018) with qROFGWGHM operator $V_{1} = 0.1324$ , $V_{2} = 0.3172$ , $V_{3} = 0.3312$ , $V_{4} = 0.2084$ , $V_{5} = 0.3526$ $X_{5} ≻ X_{3} ≻ X_{2} ≻ X_{4} ≻ X_{1}$

Liu and Liu (2018) with qROFWBM operator $V_{1} = - 0.7144$ , $V_{2} = - 0.5845$ , $V_{3} = - 0.5640$ , $V_{4} = - 0.6416$ , $V_{5} = - 6163$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Yang and Pang (2020) with qROFWBMDA operator $V_{1} = - 0.4570$ , $V_{2} = - 0.1966$ , $V_{3} = - 0.0703$ , $V_{4} = - 0.44442$ , $V_{5} = - 0.2833$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Liu and Wang (2018) with qROFWA operator $V_{1} = - 0.0405$ , $V_{2} = 0.1789$ , $V_{3} = 0.1774$ , $V_{4} = - 0.0122$ , $V_{5} = 0.1350$ $X_{2} ≻ X_{3} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Garg and Chen (2020) with qROFWNA operator $V_{1} = 0.5930$ , $V_{2} = 0.7395$ , $V_{3} = 0.7113$ , $V_{4} = 0.6782$ , $V_{5} = 0.7410$ $X_{5} ≻ X_{3} ≻ X_{2} ≻ X_{4} ≻ X_{1}$

Liu et al. (2020) with qROFPWMSM operator $V_{1} = - 0.1154$ , $V_{2} = 0.1161$ , $V_{3} = 0.1556$ , $V_{4} = 0.0348$ , $V_{5} = 0.0934$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Proposed method with qROFIPWA operator and qROFIPWAMSM operator $V_{1} = - 0.1202$ , $V_{2} = 0.1422$ , $V_{3} = 0.1645$ , $V_{4} = 0.0404$ , $V_{5} = 0.1162$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Proposed method with qROFIPWG operator and qROFIPWGMSM operator $V_{1} = - 0.0788$ , $V_{2} = 0.1523$ , $V_{3} = 0.1562$ , $V_{4} = - 0.0452$ , $V_{5} = 0.1155$ $X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Method	Score value	Ranking order
Jana et al. (2019b) with qROFDWA operator	$V_{1} = - 0.0343$ , $V_{2} = 0.2170$ , $V_{3} = 0.2042$ , $V_{4} = 0.0133$ , $V_{5} = 0.1445$	$X_{2} ≻ X_{3} ≻ X_{5} ≻ X_{1} ≻ X_{4}$
Wei et al. (2018) with qROFGWHM operator	$V_{1} = - 0.2538$ , $V_{2} = - 0.0407$ , $V_{3} = - 0.0642$ , $V_{4} = - 0.2449$ , $V_{5} = - 0.1066$	$X_{2} ≻ X_{3} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Wei et al. (2018) with qROFGWGHM operator	$V_{1} = 0.1324$ , $V_{2} = 0.3172$ , $V_{3} = 0.3312$ , $V_{4} = 0.2084$ , $V_{5} = 0.3526$	$X_{5} ≻ X_{3} ≻ X_{2} ≻ X_{4} ≻ X_{1}$
Liu and Liu (2018) with qROFWBM operator	$V_{1} = - 0.7144$ , $V_{2} = - 0.5845$ , $V_{3} = - 0.5640$ , $V_{4} = - 0.6416$ , $V_{5} = - 6163$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Yang and Pang (2020) with qROFWBMDA operator	$V_{1} = - 0.4570$ , $V_{2} = - 0.1966$ , $V_{3} = - 0.0703$ , $V_{4} = - 0.44442$ , $V_{5} = - 0.2833$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Liu and Wang (2018) with qROFWA operator	$V_{1} = - 0.0405$ , $V_{2} = 0.1789$ , $V_{3} = 0.1774$ , $V_{4} = - 0.0122$ , $V_{5} = 0.1350$	$X_{2} ≻ X_{3} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Garg and Chen (2020) with qROFWNA operator	$V_{1} = 0.5930$ , $V_{2} = 0.7395$ , $V_{3} = 0.7113$ , $V_{4} = 0.6782$ , $V_{5} = 0.7410$	$X_{5} ≻ X_{3} ≻ X_{2} ≻ X_{4} ≻ X_{1}$
Liu et al. (2020) with qROFPWMSM operator	$V_{1} = - 0.1154$ , $V_{2} = 0.1161$ , $V_{3} = 0.1556$ , $V_{4} = 0.0348$ , $V_{5} = 0.0934$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Proposed method with qROFIPWA operator and qROFIPWAMSM operator	$V_{1} = - 0.1202$ , $V_{2} = 0.1422$ , $V_{3} = 0.1645$ , $V_{4} = 0.0404$ , $V_{5} = 0.1162$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$
Proposed method with qROFIPWG operator and qROFIPWGMSM operator	$V_{1} = - 0.0788$ , $V_{2} = 0.1523$ , $V_{3} = 0.1562$ , $V_{4} = - 0.0452$ , $V_{5} = 0.1155$	$X_{3} ≻ X_{2} ≻ X_{5} ≻ X_{4} ≻ X_{1}$

Table 7

Initial assessment results of the experts.

Expert	Alternative	$L_{1}$	$L_{2}$	$L_{3}$	$L_{4}$
$D_{1}$	X₁	$⟨ 0.5, 0 ⟩$	$⟨ 0.4, 0.4 ⟩$	$⟨ 0.4, 0.3 ⟩$	$⟨ 0.5, 0 ⟩$
	$X_{2}$	$⟨ 0.7, 0.2 ⟩$	$⟨ 0.51, 0 ⟩$	$⟨ 0.5, 0.1 ⟩$	$⟨ 0.6, 0.2 ⟩$
	$X_{3}$	$⟨ 0.3, 0.2 ⟩$	$⟨ 0.38, 0.4 ⟩$	$⟨ 0.6, 0 ⟩$	$⟨ 0.4, 0.3 ⟩$
	$X_{4}$	$⟨ 0.5, 0 ⟩$	$⟨ 0.502, 0.4 ⟩$	$⟨ 0.5, 0.3 ⟩$	$⟨ 0.5, 0 ⟩$
	$X_{5}$	$⟨ 0.6, 0.1 ⟩$	$⟨ 0.3, 0 ⟩$	$⟨ 0.6, 0.2 ⟩$	$⟨ 0.6, 0.3 ⟩$
	$X_{1}$	$⟨ 0.5, 0.3 ⟩$	$⟨ 0.5, 0 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.6, 0.3 ⟩$
$D_{2}$	$X_{2}$	$⟨ 0.6, 0 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.206, 0.2 ⟩$	$⟨ 0.4, 0 ⟩$
	$X_{3}$	$⟨ 0.4, 0.3 ⟩$	$⟨ 0.7, 0 ⟩$	$⟨ 0.35, 0.2 ⟩$	$⟨ 0.6, 0.4 ⟩$
	$X_{4}$	$⟨ 0.45, 0.4 ⟩$	$⟨ 0.5, 0.2 ⟩$	$⟨ 0.6, 0 ⟩$	$⟨ 0.5, 0.2 ⟩$
	$X_{5}$	$⟨ 0.4, 0 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.4, 0.4 ⟩$	$⟨ 0.6, 0 ⟩$
	$X_{1}$	$⟨ 0.5, 0.3 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.5, 0 ⟩$	$⟨ 0.6, 0.3 ⟩$
$D_{3}$	$X_{2}$	$⟨ 0.6, 0.1 ⟩$	$⟨ 0.49, 0.2 ⟩$	$⟨ 0.7, 0 ⟩$	$⟨ 0.2, 0.2 ⟩$
	$X_{3}$	$⟨ 0.7, 0 ⟩$	$⟨ 0.6, 0.2 ⟩$	$⟨ 0.71, 0.4 ⟩$	$⟨ 0.4, 0 ⟩$
	$X_{4}$	$⟨ 0.5, 0.3 ⟩$	$⟨ 0.7, 0 ⟩$	$⟨ 0.5, 0.2 ⟩$	$⟨ 0.6, 0.1 ⟩$
	$X_{5}$	$⟨ 0.62, 0.3 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.3, 0 ⟩$	$⟨ 0.4, 0.2 ⟩$

Table 6 shows that changing the criteria values has a significant effect on the ranking order of alternatives for the related existing methods (Liu and Wang, 2018; Wei et al., 2018; Jana et al., 2019b; Garg and Chen, 2020). The priority order of alternatives acquired by Jana et al. (2019b) with qROFDWA operator is changed from $X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$ to $X_{2} ≻ X_{3} > X_{5} > X_{1} > X_{4}$ such that best alternative is transformed from the alternative X₃ to the alternative X₂. The best alternative is changed from the alternative X₃ to the alternative X₂ and the ranking order is changed from $X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$ to $X_{2} ≻ X_{3} > X_{5} > X_{4} > X_{1}$ if the approach of Wei et al. (2018) is used with qROFGWHM operator. In addition, the priority order generated by Wei et al. (2018) with qROFGWGHM operator is changed from $X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$ to $X_{5} ≻ X_{3} > X_{2} > X_{4} > X_{1}$ and the best alternative is transformed from the alternative X₃ to the alternative X₅. The best alternative changes from X₃ to X₂ and the related ranking output changes from $X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$ to $X_{2} ≻ X_{3} > X_{5} > X_{4} > X_{1}$ when the method of Liu and Wang (2018) is utilized with qROFWA operator. Moreover, the ranking order generated by Garg and Chen (2020) with qROFNWA operator changes from $X_{3} ≻ X_{2} > X_{5} > X_{4} > X_{2}$ to $X_{5} ≻ X_{3} > X_{2} > X_{4} > X_{1}$ , and the best alternative changes from X₃ to X₅. Thus the existing methods (Wei et al., 2018; Liu and Wang, 2018; Jana et al., 2019b; Garg and Chen, 2020) are unreasonable for the reason that the best alternative changes due to the biased nature of the expert $D_{2}$ . However, the methods of Liu and Liu (2018) with qROFWBM operator, Yang and Pang (2020) with qROFWBMDA operator and Liu et al. (2020) with qROFPWMSM) operator and the developed approach still have rational and unaltered ranking of the alternatives. The methods of Liu and Liu (2018), Yang and Pang (2020), Liu et al. (2020) and the developed approach can diminish the impact of unreasonable assessment criteria values from a biased expert.

To show the disadvantages of the methods of Liu and Liu (2018), Yang and Pang (2020), Liu et al. (2020), the same case study is considered with the initial assessment matrix, as given in Table 7. The ranking outcomes are presented in Table 8. From this table, it follows that the priority order of alternatives, as given by Liu and Liu (2018), are unreasonable due to the fact that they fail to distinguish the priority of alternatives. The method of Yang and Pang (2020) and the proposed approach continue to have a reasonable ranking, and the best alternative remains the same for these two approaches. This implies that both approaches are capable of mitigating the effects of unreasonable assessment criteria values provided by a biased expert.

Table 8

Comparison: proposed vs. existing methods (Liu and Liu, 2018; Liu et al., 2020; Yang and Pang, 2020) (taking $q = 2$ ).

Method	Score value	Ranking order
Liu and Liu (2018) with qROFWBM operator	$V_{1} = 0.019$ , $V_{2} = 0.019$ , $V_{3} = 0.019$ , $V_{4} = 0.019$ , $V_{5} = 0.019$	$X_{1} = X_{2} = X_{3} = X_{4} = X_{5}$
Yang and Pang (2020) with qROFWBMDA operator	$V_{1} = - 0.0749$ , $V_{2} = 0.0459$ , $V_{3} = - 0.0633$ , $V_{4} = - 0.0262$ , $V_{5} = - 0.0352$	$X_{2} ≻ X_{4} ≻ X_{5} ≻ X_{3} ≻ X_{1}$
Liu et al. (2020) with qROFPWMSM operator	$V_{1} = 0.264$ , $V_{2} = 0.264$ , $V_{3} = 0.264$ , $V_{4} = 0.264$ , $V_{5} = 0.264$	$X_{1} = X_{2} = X_{3} = X_{4} = X_{5}$
Proposed method with qROFIPWA operator and qROFIPWAMSM operator	$V_{1} = 0.2204$ , $V_{2} = 0.2458$ , $V_{3} = 0.2010$ , $V_{4} = 0.2327$ , $V_{5} = 0.2278$	$X_{2} ≻ X_{4} ≻ X_{5} ≻ X_{1} ≻ X_{3}$
Proposed method with qROFIPWG operator and qROFIPWGMSM operator	$V_{1} = 0.2165$ , $V_{2} = 0.2463$ , $V_{3} = 0.2031$ , $V_{4} = 0.2297$ , $V_{5} = 0.2257$	$X_{2} ≻ X_{4} ≻ X_{5} ≻ X_{1} ≻ X_{3}$

Table 9

Initial assessment results of the experts.

Expert	Alternative	$L_{1}$	$L_{2}$	$L_{3}$	$L_{4}$
$D_{1}$	X₁	$⟨ 1, 0 ⟩$	$⟨ 0.4, 0.4 ⟩$	$⟨ 0.4, 0.3 ⟩$	$⟨ 1, 0 ⟩$
	$X_{2}$	$⟨ 0.7, 0.2 ⟩$	$⟨ 0.1, 0 ⟩$	$⟨ 0.5, 0.1 ⟩$	$⟨ 0.6, 0.2 ⟩$
	$X_{3}$	$⟨ 1, 0 ⟩$	$⟨ 0.5, 0.4 ⟩$	$⟨ 1, 0 ⟩$	$⟨ 0.4, 0.3 ⟩$
	$X_{4}$	$⟨ 0.5, 0.3 ⟩$	$⟨ 0.5, 0.4 ⟩$	$⟨ 0.5, 0.3 ⟩$	$⟨ 1, 0 ⟩$
	$X_{5}$	$⟨ 0.6, 0.1 ⟩$	$⟨ 1, 0 ⟩$	$⟨ 0.6, 0.2 ⟩$	$⟨ 0.6, 0.3 ⟩$
	$X_{1}$	$⟨ 0.5, 0.3 ⟩$	$⟨ 1, 0 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.6, 0.3 ⟩$
$D_{2}$	$X_{2}$	$⟨ 1, 0 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 1, 0 ⟩$	$⟨ 0.4, 0.5 ⟩$
	$X_{3}$	$⟨ 0.4, 0.3 ⟩$	$⟨ 0.7, 0.2 ⟩$	$⟨ 0.4, 0.2 ⟩$	$⟨ 1, 0 ⟩$
	$X_{4}$	$⟨ 0.5, 0.4 ⟩$	$⟨ 1, 0 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.5, 0.4 ⟩$
	$X_{5}$	$⟨ 1, 0 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 1, 0 ⟩$	$⟨ 0.6, 0.4 ⟩$
	$X_{1}$	$⟨ 0.5, 0.3 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 1, 0 ⟩$	$⟨ 0.6, 0.3 ⟩$
$D_{3}$	$X_{2}$	$⟨ 1, 0 ⟩$	$⟨ 0.5, 0.2 ⟩$	$⟨ 0.7, 0.2 ⟩$	$⟨ 1, 0 ⟩$
	$X_{3}$	$⟨ 0.7, 0.2 ⟩$	$⟨ 1, 0 ⟩$	$⟨ 0.8, 0.2 ⟩$	$⟨ 0.4, 0.5 ⟩$
	$X_{4}$	$⟨ 1, 0 ⟩$	$⟨ 0.7, 0.1 ⟩$	$⟨ 1, 0 ⟩$	$⟨ 0.6, 0.1 ⟩$
	$X_{5}$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.6, 0.3 ⟩$	$⟨ 0.3, 0.5 ⟩$	$⟨ 1, 0 ⟩$

The same case study was examined again using the initial assessment matrix, as shown in Table 9. Table 10 exhibits the ranking results. According to Table 10, the ranking results of the alternatives obtained by Liu et al. (2020) are unreasonable because they fail to distinguish the priority of alternatives. The results obtained by Yang and Pang (2020) and using the proposed approach still have a reasonable ranking and the best alternative does not change for these two approaches. This suggests that both the approaches can mitigate the effects of unreasonable assessment criteria values from a biased expert.

It is known that when all experts give the same assessment values and if all the experts have the same importance, then a MCGDM problem reduces to a MCDM problem. Suppose the initial assessment matrix for the case study is given in Table 11. Table 12 shows the scores and priorities of the alternatives. The results revealed that the method of Yang and Pang (2020) failed to generate score values and alternative preference order, as well as to solve certain decision-making problems, rendering it inefficient. However, the developed methodology is capable of producing accurate ranking of alternatives.

Table 10

Comparison: proposed vs. existing methods (Liu et al., 2020; Yang and Pang, 2020) (taking $q = 2$ ).

Method	Score value	Ranking order
Yang and Pang (2020) with qROFWBMDA operator	$V_{1} = 0.6133$ , $V_{2} = 0.8372$ , $V_{3} = 0.6602$ , $V_{4} = 0.5890$ , $V_{5} = 0.6265$	$X_{2} ≻ X_{3} ≻ X_{5} ≻ X_{1} ≻ X_{4}$
Liu et al. (2020) with qROFPWMSM operator	$V_{1} = V_{2} = V_{3} = V_{4} = V_{5} = 1$ .	$X_{1} = X_{2} = X_{3} = X_{4} = X_{5}$
Proposed method with qROFIPWG operator and qROFIPWGMSM operator	$V_{1} = 0.5623$ , $V_{2} = 0.7078$ , $V_{3} = 0.6156$ , $V_{4} = 0.5533$ , $V_{5} = 0.5863$	$X_{2} ≻ X_{3} ≻ X_{5} ≻ X_{1} ≻ X_{4}$

Table 11

Initial assessment results.

Alternative	$L_{1}$	$L_{2}$	$L_{3}$	$L_{4}$
$X_{1}$	$⟨ 0.5, 0 ⟩$	$⟨ 0.4, 0.4 ⟩$	$⟨ 0.4, 0.3 ⟩$	$⟨ 0.5, 0.6 ⟩$
$X_{2}$	$⟨ 0.7, 0.2 ⟩$	$⟨ 0.5, 0 ⟩$	$⟨ 0.5, 0.1 ⟩$	$⟨ 0.6, 0.4 ⟩$
$X_{3}$	$⟨ 0.3, 0.6 ⟩$	$⟨ 0.3, 0.4 ⟩$	$⟨ 0.6, 0 ⟩$	$⟨ 0.4, 0.3 ⟩$
$X_{4}$	$⟨ 0.5, 0 ⟩$	$⟨ 0.7, 0.5 ⟩$	$⟨ 0.5, 0.3 ⟩$	$⟨ 0.5, 0.8 ⟩$
$X_{5}$	$⟨ 0.6, 0.5 ⟩$	$⟨ 0.3, 0 ⟩$	$⟨ 0.6, 0.4 ⟩$	$⟨ 0.6, 0.3 ⟩$

Table 12

Comparison: proposed vs. Yang and Peng’s method (Yang and Pang, 2020) (taking $q = 2$ ).

Method	Score value	Ranking order
Yang and Pang (2020) with qROFWBMDA operator	Cannot be determined due to division by zero	Cannot be generated
Proposed method with qROFIPWA operator and qROFIPWAMSM operator	$V_{1} = 0.0443$ , $V_{2} = 0.2818$ , $V_{3} = 0.0709$ , $V_{4} = 0.0453$ , $V_{5} = 0.2666$	$X_{2} ≻ X_{5} ≻ X_{3} ≻ X_{4} ≻ X_{1}$
Proposed method with qROFIPWG operator and qROFIPWGMSM operator	$V_{1} = - 0.0014$ , $V_{2} = 0.2545$ , $V_{3} = 0.0589$ , $V_{4} = - 0.0926$ , $V_{5} = 0.1826$	$X_{2} ≻ X_{5} ≻ X_{3} ≻ X_{1} ≻ X_{4}$

In real decision-making problems, the interrelationship between criteria can be seen. Methods of Wei et al. (2018), Liu and Liu (2018) and Yang and Pang (2020) can consider the dependency of two criteria, but they do not consider interrelationships between multiple criteria. There may be a situation in which all of the considered criteria are independent, and these methods are not appropriate for dealing with this type of decision-making problem, and may generate irrational preference of alternatives. Although the method of Garg and Chen (2020) is capable of mitigating the impact of some unreasonable assessing criteria values from some biased decision-makers and taking into account the dependency among multiple criteria, it fails to distinguish the priority orders of alternatives in some circumstances, as shown in Tables 7 and 8, respectively.

6 Conclusions

This paper presents a qROFS-based decision-making model to resolve the drawbacks of the existing methods. To develop the model, four operators, namely qROFIPWA, qROFIPWG, qROFIPWAMSM and qROFIPWGMSM, are proposed in this paper. The main advantages of the last two operators are: (1) they reduce the effects of outrageous assessing information from some biased experts, (ii) they consider the interrelationship among multiple number of criteria. A group decision-making methodology is developed based on these operators. The developed method can generate sensible ranking order of alternatives when among the qROF numbers considered, one qROF number has a (i) non-belongingness grade that equals to 0, or a (ii) belongingness grade that equals to 1. For the verification of feasibility of the proposed MCGDM method, one case study regarding personnel selection is considered. The superiority of the developed MCGDM approach is shown by comparison with existing approaches. The proposed method has two limitations: (i) it does not address the process of reaching consensus for large-scale decision-making, and (ii) it does not address the hesitancy of choosing membership and non-membership values. To address these issues, hesitant q-ROF based large scale decision-making with consensus reaching process can be developed in the future by extending the proposed operators. The proposed methodology can also be used to solve other decision-making problems and can be further extended by incorporating hesitant, probabilistic hesitant, linguistic, and probabilistic linguistic concepts.

References

Atanassov

(1986). Intuitionistic fuzzy sets. Fuzzy Sets and Systems, 20, 87–96.

Aydemir

S.B.

Gunduz

S.Y.

(2020). Extension of Multimoora method with some q-rung orthopair fuzzy Dombi prioritized weighted aggregation operators for multi attribute decision making. Soft Computing, 24, 18545–18563. https://doi.org/10.1007/s00500-020-05091-4.

Chen

S.M.

Chang

C.H.

(2016). Fuzzy multi-attribute decision making based on transformation techniques of intuitionistic fuzzy values and intuitionistic fuzzy geometric averaging operators. Information Sciences, 353, 133–149.

Chen

S.M.

Cheng

S.H.

Lan

T.C.

(2016). Multi-criteria decision-making based on the TOPSIS method and similarity measures between intuitionistic fuzzy values. Information Sciences, 367, 279–295.

Darko

A.P.

Liang

(2020). Some q-rung orthopair fuzzy Hamacher aggregation operators and their application to multiple attribute group decision making with modified EDAS method. Engineering Applications of Artificial Intelligence, 87, 103259.

Ejegwa

P.A.

(2021). Generalized tri-parametric correlation coefficient for Pythagorean fuzzy sets with applications to MCDM problems. Granular Computing, 6, 557–566.

Garg

(2016a). A new generalized Pythagorean fuzzy information aggregation using Einstein operations and its application to decision making. International Journal of Intelligent Systems, 31(9), 886–920.

Garg

(2016b). A novel correlation coefficients between Pythagorean fuzzy sets and its applications to decision-making processes. International Journal of Intelligent Systems, 31(12), 1234–1252.

Garg

(2017a). Confidence levels based Pythagorean fuzzy aggregation operators and its application to decision making process. Computational and Mathematical Organization Theory, 23(4), 546–571.

10.

Garg

(2017b). Novel intuitionistic fuzzy decision-making method based on an improved operation laws and its application. Engineering Applications of Artificial Intelligence, 60, 164–174.

11.

Garg

(2018). Generalized Pythagorean fuzzy geometric interactive aggregation operators using Einstein operations and their application to decision making. Journal of Experimental and Theoretical Artificial Intelligence, 30(6), 763–794.

12.

Garg

(2019). Intuitionistic fuzzy Hamacher aggregation operators with entropy weight and their applications to multi-criteria decision-making problems. Iranian Journal of Science and Technology, Transactions of Electrical Engineering, 43(3), 519–613.

13.

Garg

Chen

S.M.

(2020). Multi-attribute group decision making based on neutrality aggregation operators of q-rung orthopair fuzzy sets. Information Sciences, 517, 427–447.

14.

Jana

Senapati

Pal

(2019a). Pythagorean fuzzy Dombi aggregation operators and its applications in multiple-attribute decision making. International Journal of Intelligent Systems, 34(9), 2019–2038.

15.

Jana

Muhiuddin

Pal

(2019b). Some Dombi aggregation of q-rung orthopair fuzzy numbers in multiple-attribute decision making. International Journal of Intelligent Systems, 34, 3220–3240.

16.

Joshi

B.P.

Gegov

(2020). Confidence levels q-rung orthopair fuzzy aggregation operators and its applications to MCDM problems. International Journal of Intelligent Systems, 35, 125–149.

17.

Kumar

Chen

S.M.

(2021). Multi-attribute decision-making based on the improved intuitionistic fuzzy Einstein weighted averaging operator of intuitionistic fuzzy values. Information Sciences, 568, 369–383.

18.

Liu

(2018). Some q-rung orthopair fuzzy Bonferroni mean operators and their applications to multi-attribute group decision making. International Journal of Intelligent Systems, 33, 315–347.

19.

Liu

Wang

(2018). Some q-rung orthopair fuzzy aggregation operators and their applications to multi-attribute decision making. International Journal of Intelligent Systems, 33, 259–280.

20.

Liu

Wang

(2019). Multiple-attribute decision-making based on Archimedean Bonferroni operators of q-rung orthopair fuzzy numbers. IEEE Transactions on Fuzzy systems, 27(5), 834–848.

21.

Liu

Wang

(2020). Multiple attribute decision making based on q-rung orthopair fuzzy generalized Maclaurin symmetric mean operators. Information Sciences, 518, 181–210.

22.

Liu

Chen

S.M.

Wang

(2020). Multi-attribute group decision making based on q-rung orthopair fuzzy power Maclaurin symmetric mean operators. IEEE Transactions on Systems Man and Cybernetics, 50, 3741–3756.

23.

Liu

Naz

Akram

Muzammal

(2022a). Group decision-making analysis based on linguistic q-rung orthopair fuzzy generalized point weighted aggregation operators. International Journal of Machine Learning and Cybernetics, 13(4), 883–906.

24.

(2016). Symmetric Pythagorean fuzzy weighted geometric/averaging operators and their applications in multi-criteria decision-making problems. International Journal of Intelligent Systems, 31(12), 1198–1219.

25.

Mardani

Nilashi

Zavadskas

E.K.

Awang

S.R.

Zare

Jamal

N.H.

(2018). Decision making methods based on fuzzy aggregation operators: three decades review from 1986 to 2017. International Journal of Information Technology & Decision Making, 17(02), 391–466.

26.

Lioa

Zavadskas

E.K.

Barakati

A.A.

Barnawi

Taylan

Viedma

E.H.

(2019). Hospitality brand management by a score based q-rung orthopair fuzzy VIKOR method integrated with the best worst method. Economic Research, 32, 3266–3295.

27.

Mishra

A.R.

Singh

R.K.

Motwani

(2019). Multi-criteria assessment of cellular mobile telephone service providers using intuitionistic fuzzy WASPAS method with similarity measure. Granular Computing, 4(3), 511–529.

28.

Mishra

A.R.

Mardani

Rani

Zavadskas

E.K.

(2020). A novel EDAS approach on intiotionistic fuzzy set for assessment of health-care waste disposal technology using new parametric divergence measures. Journal of cleaner Production, 272, 122807. https://doi.org/10.1016/j.jclpro.2020.122807.

29.

Nie

R.X.

Tian

Z.P.

Wang

J.Q.

J.H.

(2019). Pythagorean fuzzy multiple criteria decision analysis based on Shapley fuzzy measures and partitioned normalized weighted Bonferroni mean operator. International Journal of Intelligent Systems, 34(2), 297–324.

30.

Nguyen

X.T.

Nguyen

V.D.

Nguyen

V.H.

Garg

(2019). Exponential similarity measures for Pythagorean fuzzy sets and their applications to pattern recognition and decision-making process. Complex and Intelligent Systems, 5(2), 217–228.

31.

Peng

Yuan

Yang

(2017). Pythagorean fuzzy information measures and their applications. International Journal of Intelligent Systems, 32(10), 991 1029. https://doi.org/10.1002/int.21880.

32.

Peng

Dai

Garg

(2018). Exponential operations and aggregation operations for q-rung orthopair fuzzy set and their decision making method with a new score function. International Journal of Intelligent Systems, 33, 2255–2282.

33.

Qin

Cui

Huang

Zhong

Tang

Shi

(2019a). Archimedean Muirhead aggregation operators of q-rung orthopair fuzzy numbers for multi-criteria group decision making. Complexity, 2019, 3103741 https://doi.org/10.1155/2019/3103741.

34.

Qin

Scott

P.J.

Jiang

(2019b). Multi-criteria group decision making based on Archimedean power partitioned Muirhead mean operators of q-rung orthopair fuzzy numbers. PLoS ONE, 14, e0221759.

35.

Rani

Mishra

A.R.

Pardasani

K.R.

Mardani

Liao

Streimikiene

(2019). A novel VIKOR approach based on entropy and divergence measures of Pythagorean fuzzy sets to evaluate renewable energy technologies in India. Journal of Cleaner Production, 238, 117936 https://doi.org/10.1016/j.jclepro.2019.117936.

36.

Rani

Mishra

A.R.

Krishankumar

Ravichandran

K.S.

Gandomi

A.H.

(2020). A new Pythagorean fuzzy based decision framework for assessing healthcare waste treatment. IEEE Transactions on Engineering Management. http://doi:10.1109/tem.2020.3023707.

37.

Wei

Gao

Wei

(2018). Some q-rung orthopair fuzzy heronian mean operators in multiple attribute decision making. International Journal of Intelligent Systems, 33, 1426–1458.

38.

Xing

Zhang

Zhou

Wang

(2019a). Some q-rung orthopair fuzzy point weighted aggregation operators for multi-attribute decision making. Soft Computing, 23, 11627–11649.

39.

Xing

Zhang

Wang

Bai

Xue

(2019b). A new multi-criteria group decision-making approach based on q-rung orthopair fuzzy interaction Hamy mean operators. Neural Computing and Applications, 32, 7465–7488.

40.

Yager

R.R.

(2001). The power average operator. IEEE Transactions on Systems Man and Cybernetics, 31, 724–731.

41.

Yager

R.R.

(2013a). Pythagorean fuzzy subsets. In: Proceedings of Joint IFSA World Congress and NAFIPS Annual Meeting, Edmonton, Canada, 24–28 June, pp. 57–61.

42.

Yager

R.R.

(2013b). Pythagorean membership grades in multi-criteria decision making. IEEE Transactions on Fuzzy Systems, 22, 958–965.

43.

Yager

R.R.

(2017). Generalized orthopair fuzzy sets. IEEE Transactions on Fuzzy Systems, 25, 1222–1230.

44.

Yager

R.R.

Abbasov

A.M.

(2013). Pythagorean membership grades, complex numbers and decision making. International Journal of Intelligent Systems, 28, 436–452.

45.

Yager

R.R.

Alajlan

(2017). Approximate reasoning with generalized orthopair fuzzy sets. Information Fusion, 38, 65–73.

46.

Yager

R.R.

Alajlan

Bazi

(2018). Aspects of generalized orthopair fuzzy sets. International Journal of Intelligent Systems, 33, 2154–2174.

47.

Yang

Pang

(2020). New q-rung orthopair fuzzy Bonferroni Mean Dombi operators and their application in multiple attribute decision making. IEEE Access, 8, 50587–50610.

48.

Yang

Ouyang

Peng

(2020). A decision-making algorithm for online shopping using deep-learning-based opinion pairs mining and q-rung orthopair fuzzy interaction Heronian mean operators. International Journal of Intelligent Systems, 35, 783–825.

49.

Zadeh

L.A.

(1965). Fuzzy Sets. Information and Control, 8, 338–353.

50.

Zeng

Chen

S.M.

Kuo

L.W.

(2019). Multi-attribute decision making based on novel score function of intuitionistic fuzzy values and modified VIKOR method. Information Sciences, 488, 76–92.

51.

Zhan

Ding

Liu

(2022). A novel three-way decision model based on utility theory in incomplete fuzzy decision systems. IEEE Transactions on Fuzzy Systems, 30(7), 2210–2226.

52.

Zhang

X.L.

Z.S.

(2014). Extension of TOPSIS to multi-criteria decision making with Pythagorean fuzzy sets. International Journal of Intelligent Systems, 29(12), 1061–1078.

53.

Zhong

Gao

Guo

Qin

Huang

Luo

(2019). Dombi power partitioned Heronian mean operators of q-rung orthopair fuzzy numbers for multiple attribute group decision making. PLoS ONE, 14(10), e0222007.

54.

Zou

X.Y.

Chen

S.M.

Fan

K.Y.

(2020). Multiple attribute decision-making using improved intuitionistic fuzzy weighted geometric operators of intuitionistic fuzzy values. Information Sciences, 535, 242–253.

q-Rung Orthopair Fuzzy Improved Power Weighted Operators For Solving Group Decision-Making Issues

Abstract

Keywords

1 Introduction

1.1 Research Motivation

1.2 Contributions

2.1 q-Rung Orthopair Fuzzy Sets (qROFSs)

Definition 1 (Yager, 2017).

Definition 2 (Liu and Wang, 2018).

(1) If V ( Θ 1 ) > V ( Θ 2 ) , then Θ 1 ≻ Θ 2 ; (2) If V ( Θ 1 ) = V ( Θ 2 ) , then (i) if A ( Θ 1 ) > A ( Θ 2 ) , then Θ 1 ≻ Θ 2 ; (ii) if A ( Θ 1 ) = A ( Θ 2 ) , then Θ 1 = Θ 2 . Definition 5 (Liu and Wang, 2018).

Definition 7 (Yager, 2001).

3.1 New Operations Between qROFNs

Theorem 4 (Boundedness).

Theorem 5 (Monotonicity).

Theorem 8 (Boundedness).

Theorem 9 (Monotonicity).

3.3 qROF Improved Power Weighted Geometric Operators

4 Group Decision Making Methodology

5.1 Problem Description

5.2 Problem Solution

References

(1)
If $V (Θ_{1}) > V (Θ_{2})$ , then $Θ_{1} ≻ Θ_{2}$ ;
(2)
If $V (Θ_{1}) = V (Θ_{2})$ , then
(i)
if $A (Θ_{1}) > A (Θ_{2})$ , then $Θ_{1} ≻ Θ_{2}$ ;
(ii)
if $A (Θ_{1}) = A (Θ_{2})$ , then $Θ_{1} = Θ_{2}$ .

Definition 5 (Liu and Wang, 2018).