A new cost-saving vacuum infusion process for fiber-reinforced composites: Pulsed infusion

Abstract

A new innovative infusion technology, pulsed infusion, has been developed for the manufacturing of fiber-reinforced thermoset-based composites. Pulsed infusion is a double-bag vacuum infusion process that is based on the use of a proper designed reusable pressure distributor and able to better control the vacuum pressure in pulsed way. Thus, the transverse resin flow through the dry fiber reinforcement is promoted and a better adhesion between the resin and the fibers is achieved. The new process allows to obtain laminates with the same fiber volume fraction and tensile properties of those produced by conventional infusion technologies. An average increase up to 9% for the flexural modulus and up to 24% for flexural strength has been assessed for pulse-manufactured composites compared to traditional vacuum infusion ones. Furthermore, due to a minor consumption of resin and the absence of the distribution net, pulse infusion provides a material cost-saving advantage around 19% and a significant waste reduction.

Keywords

Vacuum infusion process pulsed infusion pressure distributor

Get full access to this article

View all access options for this article.

References

Berenberg

. Liquid composite molding achieves aerospace quality. High Perform Compos 2003; 11: 18–22.

Govignon

Bickerton

Morris

. Full field monitoring of the resin flow and laminate properties during the resin infusion process. Compos A 2008; 35: 1412–1426.

Brouwer

van Herpt

ECFC

Labordus

. Vacuum injection moulding for large structural applications. Compos A 2003; 34: 551–558.

Antonucci

Giordano

Di Vita

. A simulation of the non-isothermal resin transfer molding process. Polym Eng Sci 2000; 40: 2471–2481.

Antonucci

Giordano

Nicolais

. Resin flow monitoring in resin film infusion process. Mater Process Technol 2003; 143–144: 687–692.

Mathuw

Advani

Heider

. Flow front measurements and model validation in the vacuum assisted resin transfer molding process. Polym Compos 2001; 22: 477–490.

Seeman B. Plastic transfer moulding technique for the production of fibre reinforced plastic structures. US Patent 4902215, 1990.

Williams

Summerscales

Grove

. Resin infusion under flexible tooling (RIFT): a review. Compos A 1996; 27: 517–524.

Krehl

Gillespie

. Process and performance evaluation of the vacuum-assisted process. J Compos Mater 2004; 38: 1803–1814.

10.

Mathur

Heider

Hoffmann

. Flow front measurements and model validation in the vacuum assisted resin transfer molding process. Polym Compos 2001; 22: 477–490.

11.

Loos

Rattazzi

Batra

. A three-dimensional model of the resin film infusion process. J Compos Mater 2002; 36: 1255–1273.

12.

Yenilmez

Senan

Murat Sozer

. Variation of part thickness and compaction pressure in vacuum infusion process. Compos Sci Technol 2009; 69: 1710–1719.

13.

Thagard

Okoli

Liang

. Resin infusion between double flexible tooling: prototype development. Compos A 2003; 34: 803–811.

14.

Gardiner G. Double bagging through three decades. Composites Technology, http://www.compositesworld.com/articles/archive/6b950fa0-f831-4c08-878f-dd0819c1c71c (2010, accessed 29 March 2013).

15.

Woods J, ModinAE, Hawkins RD, et al. Controlled atmospheric pressure infusion process. International Patent WO 03/101708 A1, 2003.

16.

Cornelus E, Carolus F and Herpt V. Method for the manufacture of a reinforced plastic product. US 2007/0158874 A1, 2007.

17.

Vernin N, Chobra M, Advani SG, et al. Vacuum assisted resin transfer molding techniques with flow flooding chamber. US 2007/0063393 A1, 2007.

18.

Walsh SM and Fink BK. Achieving low cost composite processes through intelligent design and control. In: Proceedings of RTO-MP-069(II), Loen, Norway, 7–11 May 2001.

19.

Allende

Mohan

Walsh

. Experimental and numerical analysis of flow behavior in the FASTRAC liquid composite manufacturing process. Polym Compos 2004; 25: 384–395.

20.

Alms

Advani

. Simulation and experimental validation of flow flooding chamber method of resin delivery in liquid composite molding. Compos A 2007; 38: 2131–2141.

21.

Markicevic

Heider

Advani

. Filling of a system of channels and porous medium: an effectiveness factor based on momentum transfer. J Porous Media 2003; 6: 223–233.

22.

Antonucci V, Durante M, Giordano M, et al. Sistema di Fabbricazione di materiali compositi con infusione pulsata (pulsed infusion). Italian Pending Patent NA2009A000067, 2009.

23.

Åkermo

Åström

. Modelling component cost in compression moulding of thermoplastic. Compos A 2000; 31: 319–333.