A time-dependent, moving boundary, multiphase Navier—Stokes model is developed to study the effects of aqueous foam with high air-to-water volume ratio (expansion ratio, Ex) on a jet diffusion flame. The flame is formed by combusting a steady flow of propane gas. Both the shape and velocity of the foam surface are affected by evaporation and injection rates, and are obtained by volume of fluid method. The evaporation at the advancing foam front releases water vapor as well as a significant amount of air into the flame. At low foam injection rates, simulations show that the flame spreads along the foam surface and is not extinguished. This is because the injection rate is comparable to the evaporation rate, which causes cooling but prevents the foam from advancing into the flame. However, at high foam injection rates, the simulations show that the flame lifts from the burner lip and the flame is reestablished above the rising foam surface due to the continued supply of the propane gas. Thus, the foam extinguishes the flame locally in its path by increased smothering as it rises towards the top of the burner. Both the smothering and evaporation effects are found to be important.
Wilder, I. ( 1969). High Expansion Foam for Shipboard Firefighting , Fire Technology Journal, 5: 25-37.
2.
Back, G.G., Forssell, E.W., Wakelin, A.J., Berne, D. and Nash, L. ( 2006). An Evaluation of Total Flooding High Expansion Foam Fire Suppression Systems for Machinery Space Applications, Fire Technology Journal, 42: 187-210.
3.
Exerowa, D. and Kruglyakov, P.M. ( 1998). Foam and Foam Films - Theory, Experiment, Applications, Studies in Interface Science, Vol. 5 (Mobius, D. and Miller, R. (series eds), Elsevier, New York.
4.
Leonard, R.A. and Lemlich, R. (1965). A Study of Interstitial Liquid Flow in Foam, AIChE Journal, 11: 18-30.
5.
Gardiner, B.S. , Dlugogorski, B.Z., Jameson, G.J., and Chhabra, R.P. (1998) Yield Stress Measurements of Aqueous Foams in the Dry Limit, Journal of Rheology, 42(6): 1437-1450.
6.
Willauer, H.D. , Ananth, R., Farley , J.P. and Williams, F.W. (2009). Mitigation of TNT and Destex Explosion Effects Using Water Mist, Journal of Hazardous Materials, 165: 1068-1073.
7.
Scheffey, J.L., Farley, J.P., Pham, H.V. and Williams, F.W. ( 2008). Summary Report - High Expansion Foam Suppression Systems Used to Combat a Hangar Bay, Well Deck, or Vehicle Storage Fire Threat, Naval Research Laboratory Letter Report, August 5, Naval Research Laboratory, Washington, DC.
8.
Budnick, E.K., Forssell, E.W., Back, G.G., Willard, R.L., Ouellette, R.J. and Leonard, J.T. ( 1995). Preliminary Evaluation of High Expansion Foam Systems for Shipboard Applications, Naval Research Laboratory Memorandum Report NRL/MR/6180-95-7785, November 27, Naval Research Laboratory, Washington, DC.
9.
Herzhaft, B. , Kakadjian, S. and Moan, M. (2005). Measurement and Modeling of the Flow Behavior of Aqueous Foams using a Recirculating Pipe Rheometer , Colloids and Surfaces A, Physicochemical and Engineering Aspects, 263: 153-164.
10.
Gardiner, B.S. and Tordesillas , A. (2005). A Link Between Discreet and Continuous Modeling of Liquid Foam at the Level of a Single Bubble, Journal of Rheology, 49(4): 819-838.
11.
Ananth, R. and Mowrey, R.C. ( 2007). Ultra-fine Mist Extinction of a Diffusion Flame , Paper # H34, In: 5th U.S. National Combustion Meeting, 25-28 March, San Diego, CA.
12.
Ananth, R. and Mowrey, R.C. ( 2008). Ultra-fine Water Mist Extinction Dynamics of a Co-flow Diffusion Flame, Combustion Science and Technology , 180: 1659-1692.
13.
Ananth, R. and Mowrey, R.C. ( 2008). Extinction Dynamics of a Co-flow Diffusion Flame by Very Small Water Droplets Injected into the Air Stream, Naval Research Laboratory Memorandum Report, NRL/MR/6180-08-9131, 28 July , Naval Research Laboratory, Washington, DC.
14.
Boyd, C.F. and Di Marzo, M. ( 1998). The Behavior of a Fire-protection Foam Exposed to Radiant Heating, International Journal of Heat and Mass Transfer, 41(12): 1719-1728.
15.
Linteris, G.T. , Takahashi, F. and Katta, V.R. (2007). Fuel Effects in Cup-burner Flame Extinguishment, Paper#1121, In: 5th US National Combustion Meeting, 25-28 March, San Diego, CA.
16.
Fisher, B.T. , Awtry, A.R., Sheinson, R.S. and Fleming, J.W. ( 2006). Flow Behavior Impact on the Suppression Effectiveness of Sub-10 μm Water Drops in Propane/Air Coflow Non-premixed Flames, In: 31st International Proceedings of Combustion Institute , Vol. 31, pp. 2731-2739.
17.
Prasad, K., Li, C., Kailasanath, K., Ndubizu, C.C., Ananth, R. and Tatem, P.A. ( 1998). Numerical Modeling of Water Mist Suppression of Methane-air Diffusion Flames, Combustion Science and Technology , 132: 325-364.
18.
Westbrook, C.K. and Dryer, F.L. (1981). Simplified Reaction Mechanisms for the Oxidation of Hydrocarbon Fuels in Flames, Combustion Science and Technology, 27: 31.
19.
Hirt, C.W. and Nichols, B.D. ( 1981). Volume of Fluid (VOF) Method for the Dynamics of Free Boundaries, Journal of Computational Physics, 39: 201-225.
Bukhari, S.J.K. and Siddiqui, M.H.K. (2007). Characteristics of Air and Water Velocity Fields During Natural Convection, Journal of Heat and Mass Transfer, 43: 415-425.
22.
Reinelt, D.A. (1993). Simple Shearing Flow of Three-dimensional Foams and Highly Concentrated Emulsions with Planar Films , Journal of Rheology, 37(6): 1117-1139.
23.
Lattimer, B.Y. and Trelles, J. (2007). Foam Spread Over a Liquid Pool, Fire Safety Journal, 42: 249-264.
24.
Ananth, R., Ndubizu, C.C. and Tatem, P.A. ( 2003). Burning Rate Distributions for Boundary Layer Flow Combustion of a PMMA Plate in Forced Flow, Combustion and Flame, 135: 35-55.
25.
Ananth, R., Ndubizu, C.C. and Tatem, P.A. ( 2001). A Numerical Model for the Development of a Boundary Layer Diffusion Flame Over a Porous Flat Plate, Naval Research Laboratory Memorandum Report, NRL/MR/6183- 01-8547, 23 April, Naval Research Laboratory, Washington, DC.
26.
Bird, R.R., Stewart, W.E. and Lightfoot, E.N. ( 1960). Transport Phenomena, 2nd edn, John Wiley & Sons, New York.
