In situ testing on a new crashworthy device against ship-mitre gate collision

Abstract

The mitre gate has been widely used in ship locks. However, apart from the normal operational loads, the gate is subjected to unexpected incidents, including sudden loads such as collision of the ship. Due to the fact that this kind ofstructure is widely used in a variety of ship locks and holds great promise for future applications, the safety of the structure has received widespread attention. Nowadays, traditional steel fenders are widely used as crashworthy devices in most mitre gates. In order to improve the crashworthiness of the structure, a new crashworthy device made from rubber composite against ship-mitre gate collision is developed instead of traditional steel fenders. In situ testing on this new fender is performed in order to investigate the crashworthiness of the fender. A real ship is used to crash against the gate in the ship lock to create a structural vibration in the test. The dynamic responses of the gate with steel and the new fender are detected so as to compare the effects of the different collision protection systems used in the gate. The test results show that the vibration amplitude changes greatly between gates with steel and the new fender. The structural maximal acceleration and strain responses all decrease when the gate installs the new fender. Based on the in situ vibration test conducted, the installation of a new fender as collision protection device is proven to be an effective method to make the gate in the ship lock safer.

Keywords

Fender collision mitre gate new crashworthy device vibration

Get full access to this article

View all access options for this article.

References

Dias

Pereira

(2004) Optimization methods for crashworthiness design using multibody models. Computers & Structures 82(17–19): 1371–1380.

Liu

(2005) Structural damage identification using system dynamic properties. Computers & Structures 83(27): 2185–2196.

Gokdeniz

Deniz

(2006) Dynamics of ships and fenders during berthing in a time domain. Ocean Engineering 33(14–15): 1919–1934.

Hwang

Kim

(2004) Damage detection in structures using a few frequency response measurements. Journal of Sound and Vibration 270(1–2): 1–14.

Jiang

(2010) Optimization of a fender structure for the crashworthiness design. Materials and Design 31(3): 1085–1095.

Liang

Zhang

Liu

(2007) Study on process and impact strength for a rotationally molded truck fender. Journal of Materials Processing Technology 188: 492–496.

Qiao

Yang

Mosallam

(2004) Impact analysis of I-Lam sandwich system for over-height collision protection of highway bridges. Engineering Structures 26(7): 1003–1012.

Shigeki

Masayoshi

(2007) Ship berthing and mooring monitoring system by pneumatic-type fenders. Ocean Engineering 34(8–9): 1174–1181.

Wang

Yang

Huang

Zhang

Chen

(2008) An impact dynamics analysis on a new crashworthy device against ship-bridge collision. International Journal of Impact Engineering 35(8): 895–904.