This paper addresses the vibration reduction of a simple structure, simulating a workpiece carrier plate, through a cancellation technique based on the use of smart compensation actuators. The proposed compensation strategy is implemented resorting to magnetostrictive actuators acting far from their resonant frequencies. Specifically, the procedure has been tested on two test rigs designed with particular reference to machine tools applications: they require the use of one and three magnetostrictive actuators for one-dimensional (1D) and three-dimensional (3D) vibrations compensation. The parameters of the compensation strategy are identified from the direct characterization of the actuators embedded in the structure. The resulting reduction of the lateral vibrations of 1D and 3D plates in the frequency range up to 400 Hz proves to be very satisfactory.
AljanaidehORakhejaSSuCY (2013) A Prandtl-Ishlinskii model for characterizing asymmetric and saturated hysteresis of smart material actuators. Intelligent Robotics and Applications Lecture Notes in Computer Science8103: 635–643.
2.
BashashSVoraKJaliliN (2011) Distributed-parameters modeling and control of rod-type solid-state actuators. Journal of Vibration and Control17: 813–825.
3.
BottauscioORoccatoPEZuccaM (2010) Modelling the dynamic behaviour of magnetostrictive actuators. IEEE Transactions on Magnetics46: 3022–3028.
4.
BottauscioORoccatoPEZuccaM (2011) Modelling magnetostrictive material for high-speed tracking. Journal of Applied Physics109: 07B525–3.
5.
DavinoDGiustinianiAVisoneC (2011) Experimental analysis of vibrations damping due to magnetostrictive based energy harvesting. Journal of Applied Physics109: 07E509–3.
6.
Denkena B, Möhring HC and Will JC (2007) Tool deflection compensation with an adaptronic milling spindle. In Proceedings of International Conference on Smart Machining Systems, Gaithersburg, MD, March 13–15.
7.
DohnerJLLaufferJPHinnerichsTD (2004) Mitigation of chatter instabilities in milling by active structural control. Journal of Sound and Vibration269: 197–211.
8.
EkreemNBOlabiAGPrescottT (2007) An overview of magnetostriction, its use and methods to measure these properties. Journal of Materials Processing Technology191: 96–101.
9.
GengZJHaynesLS (1994) Six degree-of-freedom active vibration control using the stewart platforms. IEEE Transactions on Control System Technology2: 45–53.
10.
HillerMWBryantMDUmegakiJ (1989) Attenuation and transformation of vibration through active control of magnetostrictive terfenol. Journal of Sound and Vibration134(3): 507–519.
11.
IEEE std319-1990 (1991) IEEE Standard on Magnetostrictive Materials: Piezomagnetic Nomenclature, New York: The Institute of Electrical and Electronics Engineers, Inc.
12.
KameshDPandiyanRGhosalA (2010) Modeling, design and analysis of low frequency platform for attenuating micro-vibration in spacecraft. Journal of Sound and Vibration329: 3431–3450.
13.
KumarJGanesanNSwarnamaniS (2004) Active control of simply supported plates with a magnetostrictive layer. Smart Materials and Structures13: 487–492.
14.
LiF-MSongZ-GChenZ-B (2012) Active vibration control of conical shells using piezoelectric materials. Journal of Vibration and Control18: 2234–2256.
15.
May C, Kuhnen K, Pagliarulo P, et al. (2003) Magnetostrictive dynamic vibration absorber (DVA) for passive and active damping. In Proceedings of 5th European Conference on Noise Control Euronoise, Naples, Italy, 19–21 May.
16.
MoonSJLimCWKimBH (2007) Structural vibration control using linear magnetostrictive actuators. Journal of Sound and Vibration302: 875–891.
17.
NataleCVelardiFVisoneC (2001) Identification and compensation of Preisach hysteresis models for magnetostrictive actuators. Physica B306: 161–165.
18.
NealisJMSmithRC (2007) Model-based robust control design for magnetostrictive transducers operating in hysteretic and nonlinear regimes. IEEE Transactions on Control Systems Technology15: 22–39.
19.
OlabiAGGrunwaldA (2008) Design and application of magnetostrictive materials. Materials and Design2: 469–483.
20.
PonsJL (2005) Emerging Actuator Technologies. A Micromechatronic Approach, Chichester, England: John Wiley & Sons Ltd.
21.
RaffaFARoccatoPEZuccaM (2011) Realization of a new experimental setup for magnetostrictive actuators. Meccanica46: 979–987.
22.
RashidANicolescuCM (2006) Active vibration control in palletised workholding system for milling. International Journal of Machine Tools and Manufacture46: 1626–1636.
23.
ShawJ (2001) Active vibration isolation by adaptive control. Journal of Vibration and Control7: 19–31.
24.
SmithRCDapinoMJSeeleckeS (2003) Free energy model for hysteresis in magnetostrictive transducers. Journal of Applied Physics93: 458–466.
25.
VaillonLPhilippeC (1999) Passive and active microvibration control for very high pointing accuracy space systems. Smart Materials and Structures8: 719–728.
26.
Wu S, Turner TL and Rizzi SA (2000) Piezoelectric shunt vibration damping of an F-15 panel under high-acoustic excitation. In: SPIE Conference on Smart Structures and Materials 2000: Damping and Isolation. Newport Beach, CA, 6 March 2000, Proc. SPIE 3989, pp. 276–287.
27.
ZhaoTChenL-XCaiG-P (2012) Experimental study of H∞ control for a flexible plate. Journal of Vibration and Control18: 1631–1649.
28.
ZhouHMZhengXJZhouY-H (2006) Active vibration control of nonlinear giant magnetostrictive actuators. Smart Materials and Structures15: 792–798.
