Scattering of flexural waves by a semi-infinite crack in an elastic plate carrying an electric current

Abstract

Smart structures are components used in engineering applications that are capable of sensing or reacting to their environment in a predictable and desired manner. In addition to carrying mechanical loads, smart structures may alleviate vibration, reduce acoustic noise, change their mechanical properties as required or monitor their own condition. With the last point in mind, this article examines the scattering of flexural waves by a semi-infinite crack in a non-ferrous thin plate that is subjected to a constant current aligned in the direction of the crack edge. The aim is to investigate whether the current can be used to detect or inhibit the onset of crack growth. The model problem is amenable to an exact solution via the Wiener–Hopf technique, which enables an explicit analysis of the bending (and twisting) moment intensity factors at the crack tip, and also the diffracted field. The latter contains an edge wave component, and its amplitude is determined explicitly in terms of the current and angle of incidence of the forcing flexural wave. It is further observed that the edge wave phase speed exhibits a dual dependence on frequency and current, resulting in two distinct asymptotic behaviours.

Keywords

Wiener–Hopf technique semi-infinite crack edge wave electric current orthotropic plate stress intensity factor

Get full access to this article

View all access options for this article.

References

Ambur

Hasanyan

Librescu

Qin

. Diffraction of harmonic flexural waves in a cracked elastic plate carrying electrical current. Proc R Soc Lond 2005; A461: 3542–3560.

Konenkov

. A Rayleigh-type flexural wave. Sov Phys Acoust 1960; 6: 122–123.

Lawrie

Kaplunov

. Edge waves and resonance on elastic structures: an overview. Math Mech Solids, 2012; 17: 4–16.

Ishlinskii

. On a limiting process in the theory of the stability of elastic rectangular plates. Dokl Akad Nauk SSSR 1954; 95: 477–479.

Sinha

. Some remarks on propagation characteristics of ridge guides for acoustic waves at low frequencies. J Acoust Soc Am 1974; 56: 16–18.

Thurston

McKenna

. Flexural acoustic waves along the edge of a plate. IEEE Trans Sonics Ultrasonics 1974; 21: 296–297.

Norris

. Flexural edge waves. J Sound Vib 1994; 171: 571–573.

Norris

Wang

. Bending wave diffraction from strips and cracks on thin plates. Q J Mech Appl Math 1994; 47: 607–627.

Thompson

Abrahams

Norris

. On the existence of flexural edge waves on thin orthotropic plates. J Acoust Soc Am 2002; 112: 1756–1765.

10.

. Existence and uniqueness of edge waves in a generally anisotropic elastic plate. Q J Mech Appl Math 2003; 56: 605–616.

11.

Shindo

Ogihara

Horigudi

. Dynamic bending of a magnetically saturated plate with a through crack in a uniform magnetic field. Theoret Appl Mech 2000; 49: 69–81.

12.

Graff

. Wave motion in elastic solids, Dover edition. New York: Dover Publications Inc., 1991.

13.

Lawrie

Abrahams

. A brief historical perspective of the Wiener–Hopf technique. J Eng Math 2007; 59: 351–358.

14.

Noble

. Methods based on the Wiener–Hopf technique, 2nd edition. New York: Chelsea Publishing Company, 1988.

15.

Thompson

Abrahams

. Diffraction of flexural waves by cracks in orthotropic this elastic plates. I Formal solution. Proc R Soc Lond 2005; A461: 3413–3436.

16.

Thompson

Abrahams

. Diffraction of flexural waves by cracks in orthotropic this elastic plates. II Far field analysis. Proc R Soc Lond 2007; A463: 1615–1638.

17.

Thompson

. An improved uniform approximation for diffraction integrals. Proc R Soc Lond 2006; 462: 1341–1353.

18.

Zernov

Kaplunov

. Three dimensional edge-waves in plates. Proc R Soc Lond 2008; A464: 301–318.

19.

Zucchini

Hui

Zehnder

. Crack tip stress fields for thin, cracked plates in bending, shear and twisting: A comparison of plated theory and three-dimensional elasticity theory solutions. Int J Fracture 2000; 104: 387–407.

20.

Zehnder

Viz

. Fracture mechanics of thin plates and shells under combined membrane, bending and twisting loads. Appl Mech Rev 2005; 58: 1–43.

21.

Young

Sun

. Cracked plates subjected to out-of-plane tearing loads. Int J Fracture 1993; 60: 1–18.