Description of the Convective Air-Drying of a Food Model by Means of the Fractal Theory

Abstract

A slab-shaped model food prepared using glucose solutions and agar as jellifying agent was subjected to drying in an experimental drier. Drying kinetics and surface temperature (ST) distribution along drying were evaluated. When fractal analysis was applied to ST distributions it was possible to observe three stages: the first one, at the beginning of the process, was very short and could not be associated with a fractal dimension. The second one, by far the longest, had a constant value of the fractal dimension of the ST distribution and towards the end of the process, as temperature of the surface of the material tended to homogenise, a final linear stage was found which corresponded to equilibrium conditions. Images of the slab along drying were recorded and showed an increasing heterogeneous appearance as drying proceeds. Grey level intensity plots corresponding to these images also showed an increasing irregularity (higher values of fractal dimension) with drying time. Fractal analysis probed to be a useful tool for describing drying kinetics and for characterising images of samples subjected to dehydration.

Get full access to this article

View all access options for this article.

References

Aguilera J. M. and Stanley D. W. (1999). Microstructural Principles of Food Processing and Engineering. 2nd Edn. Gaithersburg, Maryland: Aspen Publishing Inc . pp. 373-411.

AOAC (1995). Official Methods of Analysis. 16th Edn. Arlington Virginia: Association of Official Analytical Chemists International .

Avnir D. (1989). The Fractal Approach to Heterogeneous Chemistry. Surfaces, Colloids, Polymers. Great Britain: John Wiley & Sons .

Barnsley M. F. (1988). Fractals Everywhere. 2nd Edn., London, United Kingdom: Academic Press . pp. 180-187, 205-238.

Brinker C. J and Sherer W. G. (1990). Sol-Gel Science The Physics and Chemistry of Gel Processing. United Kingdom: Academic Press . pp. 507-508.

Cronin K. and Kearney S. (1998). Monte Carlo modelling of vegetable tray dryer . Journal of Food Engineering 35: 233-250 .

Dewey G. T. (1997). Fractals in Molecular Biophysics. New York: Oxford University Press .

Doherty M. F. and Ottino J. M. (1988). Chaos in deterministic systems: strange attractors, turbulence and applications in chemical engineering . Chemical Engineering Science 43(2): 139-183 .

Doulia D., Tzia K. and Gekas V. (2000). A knowledge base for the apparent mass diffusion coefficient (DEFF) of foods . International Journal of Food Properties 3(1): 1-14 .

10.

Gekas V. and Lamberg I. (1991). Determination of diffusion coefficients in volume-changing systems-application in case of potato drying . Journal of Food Engineering 14: 317-326 .

11.

Giona M., Schwalm W. A., Schawalm M. K. and Adrover A. (1996a). Exact solution of linear transport equations in fractal media. diffusion and convection . Chemical Engineering Science 51(20): 4731-4744 .

12.

Giona M., Schwalm W. A., Schawalm M. K. and Adrover A. (1996b). Exact solution of linear transport equations in fractal media. renormalization analysis and general theory . Chemical Engineering Science 51(20): 4717-4730 .

13.

Grebogi C., Ott E. and Yorke, J. A. (1987). Chaos, strange attractors, and fractal basin boundaries in nonlinear dynamics . Science 238: 632-638 .

14.

Johnson M. A. and Moon F. C. (1999). Experimental characterization of quasiperiodical and chaos in a mechanical system with delay . International Journal of Bifurcation and Chaos 9(1): 49-65 .

15.

Kopelman R. (1988). Fractal reaction kinetics . Science 241: 1620-1626 .

16.

Mandelbrot B.M. (1977). The Fractal Geometry of Nature. New York: W. H. Freeman . pp. 10-41.

17.

Oliveira L. S., Fortes M. and Haghighl K. (1994). Conjugate analysis of natural convective drying of biological materials . Drying Technology 12(5): 1167-1190 .

18.

Pedreschi F., Aguilera J. M. and Brown C. (2000). Characterization of food surfaces using scale-sentive fractal analysis . Journal of Food Processing Engineering. 23: 127-143 .

19.

Quevedo R., Aguilera J. M. and Pedreschi F. (2001). Characterization of food surfaces (Roughness) using the different box counting method . In: Welti-Chanes J., Barbosa-Cánovas G. V., Aguilera J. M., Proceedings of the Eighth International Congress on Engineering and Food (ICEF 8), Puebla, Mexico. Lancaster, PA: Technomic Publishing Co. pp. 189-193 .

20.

Quevedo R., López G. R., Aguilera J. M. and Cadoche L. (2002). Description of food surfaces and microstructural changes using fractal image texture analysis . Journal of Food Engineering 53: 361-371 .

21.

Russ J. C. (1994). Fractal Surfaces. New York: Plenum Press .

22.

Saravacos G. D. (1995). Mass transfer properties of foods. In: Rao M. A. and Rizvi (eds), Engineering Properties of Foods. 2nd Edn., New York: Dekker . pp. 169-221.

23.

Yano T. (1996). Fractal nature of food materials . Bioscience Biotechnology. Biochemistry 60(5): 739-744 .