The paste viscosity of starches Amioca (~0.5% amylose), native corn (~27% amylose), Hylon VII (~70% amylose), tapioca (~19% amylose), and their whey protein isolate (WPI; 50/50) mixtures at varying solid concentration of 2.5, 5, 10, 15 and 20% were determined. At higher gel concentration (20%) during the cooling cycle, WPI paste measured by rapid visco-analyser (RVA) showed a tremendous increase in viscosity over that of the micro visco-amylograph (MVA), 5784 and 184 cP, respectively. RVA gels had a more uniform network of coarse particles (~250—500 nm) than the fine structures (~50 nm) in those of the MVA. Inclusion of WPI reduced the paste viscosity of all starches by at least 50%, except for Hylon VII at 20% solid concentration. The strength of Hylon VII and corn starch gels was reduced by WPI. In contrast, gels of WPI/tapioca (G' = 45.4 Pa) and WPI/amioca (G' = 18.3 Pa) had similar rheological properties as their pure starch control (G' = 47.4 Pa and G' = 15.3 Pa for Tapioca and Amioca, respectively).
Aguilera J.M. and Rojas E. (1996). Rheological, thermal and microstructural properties of whey protein-cassava starch gels. Journal of Food Science61(5): 962—966.
2.
Batey I.L. and Curtin B.M. (2000). Effects on pasting viscosity of starch and flour from different operating conditions for the Rapid Visco Analyser. Cereal Chemistry77(6): 754—760.
3.
Becker A., Hill, S.E. and Mitchell J.R. (2001). Milling - A further parameter affecting the rapid visco analyser (RVA) profile. Cereal Chemistry78(2): 166—172.
4.
Brooks S.E.H., Reynolds P., Audretsch J.J. and Haggis G. (1975). Scanning electron-microscopy of proliferating bile ductiles. Laboratory Investigation33(3): 311—315.
5.
Carvalho C.W.P. and Mitchell J.R. (2000). Effect of sugar on the extrusion of maize grits and wheat flour. International Journal of Food Science and Technology35: 569—576.
6.
Clark A.H., Kavanagh G.M. and Ross-Murphy S.B. (2001). Globular protein gelation—theory and experiment. Food Hydrocolloids15(4—6): 383—400.
7.
Havea P., Carr A.J. and Creamer L.K. (2004). The roles of disulphide and non-covalent bonding in the functional properties of heat-induced whey protein gels. Journal of Dairy Research71: 330—339.
8.
Ikeda S. and Morris V.J. (2002). Fine-stranded and particulate aggregates of heat-denatured whey proteins visualized by atomic force microscopy. Biomacromolecules3(2): 382—389.
9.
Lai K.P., Steffe J.F. and Ng P.K.W. (2000). Average shear rates in the rapid visco analyser (RVA) mixing system. Cereal Chemistry77(6): 714—716.
10.
Lai L.S. and Liao H.J. (2002). Dynamic rheology of structural development in starch/decolourised hsian-tsao leaf gum composite systems. Journal of the Science of Food and Agriculture82(10): 1200—1207.
11.
Lionetto F., Maffezzoli M., Ottenhof M.A., Farhat I.A. and Mitchell J.R. (2005). The retrogradation of concentrated wheat starch systems. Starch - Stärke57(1): 16—24.
12.
Marshall W.E. and Chrastil J. (1992). Interaction of food proteins with starch. In: Hudson B.J.F. (ed.), Biochemistry of Food Proteins. London: Elsevier Applied Science Publishers, pp. 75—97.
13.
McGrane S.J., Mainwaring D.E., Cornell H.J. and Rix C.J. (2004). The role of hydrogen bonding in amylose gelation . Starch — Stärke56(3—4): 122—131.
14.
Meares C.A., Bogracheva T.Y., Hill S.E. and Hedley C.L. (2004). Development and testing of methods to screen chickpea flour for starch characteristics. Starch — Stärke56(6): 215—224.
15.
Nishinari K., Zhang H. and Ikeda, S. (2000). Hydrocolloid gels of polysaccharides and proteins. Current Opinion in Colloid & InterfaceScience5(3—4): 195—201.
16.
Qian J.Y. and Kuhn M. (1999). Evaluation on gelatinization of buckwheat starch: a comparative study of Brabender viscoamylography, rapid visco-analysis, and differential scanning calorimetry. EuropeanFood Research and Technology209: 277—280.
17.
Ravindra P., Genovese D.B., Foegeding E.A. and Rao M.A. (2004). Rheology of heated mixed whey protein isolate/cross-linked waxy maize starch dispersions. Food Hydrocolloids18(5): 775—781.
18.
Richardson P.H., Jeffcoat R. and Shi Y.C. (2000). High-Amylose starches: From biosynthesis to their use as food ingredients. MRSBulletin20—24.
19.
Shim J. and Mulvaney S.J. (2001). Effect of heating temperature, pH, concentration and starch/whey protein ratio on the viscoelastic properties of corn starch/whey protein mixed gels. Journal of the Science of Food and Agriculture81(8): 706—717.
20.
Sriburi P. and Hill S.E. (2000). Extrusion of cassava starch with either variations in ascorbic acid concentration or pH. International Journal of Food Science and Technology35(2): 141—154.
21.
Suh D.S. and Jane J.L. (2003). Comparison of starch pasting properties at various cooking conditions using the Micro Visco-Amylo-Graph and the Rapid Visco Analyser . Cereal Chemistry80(6): 745—749.
22.
Taggart P. (2004). Starch as an ingredient: manufacture and applications . In: Eliasson A.C. (ed.). Starch in Food. Cambridge: Woodhead Publishing Limited, pp. 363—392.
23.
Tester R.F., Karkalas J. and Qi X. (2004). Starch — composition, fine structure and architecture. Journal of CerealScience39(2): 151—165.
24.
Thiewes H.J. and Steeneken, P.A.M. (1997). Comparison of the Brabender Viskograph and the Rapid Visco Analyser. 2. Shear conditions. Starch — Stärke49: 93—96.
25.
Varavinit S., Shobsngob, S., Varanyanond W., Chinachoti P. and Naivikul O. (2003). Effect of amylose content on gelatinization, retrogradation and pasting properties of flours from different cultivars of Thai rice. Starch — Starke55(9): 410—415.
26.
Vardhanabhuti B., Foegeding E.A., McGuffey M.K., Daubert C.R. and Swaisgood H.E. (2001). Gelation properties of dispersions containing polymerized and native whey protein isolate. Food Hydrocolloids15: 165—175.
27.
Yang H., Irudayaraj J., Otgonchimeg S. and Walsh M. (2004). Rheological study of starch and dairy ingredient-based food systems. Food Chemistry86(4): 571—578.
28.
Zhang G.Y. and Hamaker B.R. (2003). A three component interaction among starch, protein, and free fatty acids revealed by pasting profiles. Journal of Agricultural and Food Chemistry51(9): 2797—2800.
