The aim of this study was to measure the impact of heating on the sensory properties of blue-veined cheeses in order to characterise their sensory properties and to identify their specific sensory typology associated with physicochemical parameters. Sensory profiles were performed on a selection of Protected Designation of Origin (PDO) cheeses representing the four blue-veined cheese categories produced in the Massif Central (Fourme d’Ambert, Fourme de Montbrison, Bleu d’Auvergne and Bleu des Causses). At the same time, physicochemical parameters were measured in these cheeses. The relationship between these two sets of data was investigated. Four types of blue-veined cheeses displayed significantly different behaviour after heating and it is possible to discriminate these cheese categories through specific sensory attributes. Fourme d’Ambert and Bleu d’Auvergne exhibited useful culinary properties: they presented good meltability, stretchability and a weak oiling-off. However, basic tastes (salty, bitter and sour) are also sensory attributes which can distinguish heated blue cheeses. The relationship between the sensory and physicochemical data indicated a correlation suggesting that some of these sensory properties may be explained by certain physicochemical parameters of heated cheeses.
BanvilleVMorinPPouliotYBrittenM (2014) Shreddability of pizza Mozzarella cheese predicted using physicochemical properties. Journal of Dairy Science97(7): 4097–4110.
2.
BerdagueLGrappinRDubozG (1988) Affinage et qualité du gruyère de Comté VI. Caractéristiques sensorielles des fromages. Lait68(2): 189–204.
3.
BreslinPAS (1996) Components of flavour interactions among salty, sour and bitter compounds. Trends in Food Science and Technology7(96): 390–399.
4.
CayotN (2007) Sensory quality of traditional foods. Food Chemistry101(1): 154–162.
5.
DelwicheJ (2004) The impact of perceptual interactions on perceived flavor. Food Quality and Preference15(2): 137–146.
6.
EberhardPMoorURueggM (1988) Composition and physical properties of Raclette cheese of good and of insufficient melting quality. Raclette cheese from pasteurized milk. Schweizerische Milchwirtschaftliche Forschung17(1): 47–52.
7.
EngelETournierCSallesCLe QuéréJL (2001) Evolution of the composition of a selected bitter Camembert cheese during ripening: release and migration of taste-active compounds. Journal of Agricultural and Food Chemistry49(6): 2940–2947.
8.
EngelenLDe WijkRAPrinzJJanssenAMWeenenHBosmanF (2003) The effect of oral and product temperature on the perception of flavor and texture attributes of semi-solids. Appetite41(3): 273–281.
9.
EverettDWAutyMAE (2008) Cheese structure and current methods of analysis. International Dairy Journal18(7): 759–773.
GalloisALangloisD (1990) New results in the volatile odorous compounds of French cheeses. Lait70(2): 89–106.
12.
GobbettiMBurzigottiRSmacchiECorsettiADe AngelisM (1998) Microbiology and biochemistry of Gorgonzola cheese during ripening. International Dairy Journal7(8–9): 519–529.
13.
González de LlanoDRamosMRodriguezAMontillaAJuarezM (1992) Microbiological and physicochemical characteristics of Gamonedo blue cheese during ripening. International Dairy Journal2(2): 121–135.
14.
GuineeT (2002) The functionality of cheese as an ingredient: A review. Australian Journal of Dairy Technology57(2): 79–91.
15.
GuineeTPHarringtonDCorcoranMOMulhollandEOMullinsC (2000) The compositional and functional properties of commercial mozzarella, cheddar and analogue pizza cheeses. International Journal of Dairy Technology53(2): 51–56.
ISO 13299: 2003. (2003). Sensory analysis – Methodology – General guidance for establishing a sensory profile.
18.
ISO 5534:2004. (2004). Determination of the total solids content. (Reference method).
19.
ISO 8070:2007. (2007a). Determination of calcium, sodium, potassium and magnesium contents.
20.
ISO 5943:2007. (2007b). Determination of chloride content.
21.
ISO 8589: 2007. (2007c). Sensory analysis — General guidance for the design of test rooms.
22.
ISO 5492:2009. (2009). Sensory analysis — Vocabulary.
23.
ISO 1211: 2010. (2010). Milk — Determination of fat content — Gravimetric method (Reference method).
24.
ISO 8586: 2012. (2012). Sensory analysis — General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors.
25.
ISO 8968-1: 2014. (2014). Milk and milk products – Determination of nitrogen content – Part 1: Kjeldahl principle and crude protein calculation.
26.
JacquotSKarouiRAbbasKLebecqueABordCAït-KaddourA (2014) Potential of multispectral Imager to characterize anisotropic French PDO cheeses: A feasibility study. International Journal of Food Properties18(1): 213–230.
27.
KapoorRMetzgerLE (2008) Process cheese: Scientific and technological aspects — A review. Comprehensive Reviews in Food Science and Food Safety7(2): 194–214.
28.
KindstedtPSRippeJK (1990) Rapid quantitative test for free oil (Oiling-Off) in melted Mozzarella cheese. Journal Dairy Science73(4): 867–873.
29.
KoppelKChambersDH (2012) Flavor comparison of natural cheeses manufactured in different countries. Journal of Food Science77(5): S177–87.
30.
LarsenMDKristiansenKRHansenTK (1998) Characterization of the proteolytic activity of starter cultures of Penicillium roqueforti for production of blue veined cheeses. International Journal of Food Microbiology43(3): 215–221.
31.
LawlorJBDelahuntyCMSheehanJWilkinsonMG (2003) Relationships between sensory attributes and the volatile compounds, non-volatile and gross compositional constituents of six blue-type cheeses. International Dairy Journal13(6): 481–494.
32.
LawlorJBDelahuntyCMWilkinsonMGSheenanJ (2001) Relationships between the sensory characteristics, neutral volatile composition and gross composition of ten cheese varieties. Lait81(4): 487–507.
33.
LawrenceRCHeapHAGillesJ (1984) A controlled approach to cheese technology. Journal of Dairy Science67(8): 1632–1645.
34.
LemieuxLSimardR (1991) Bitter flavour in dairy products. I. A review of the factors likely to influence its development, mainly in cheese manufacture. Lait71(6): 599–636.
35.
LuceyJA (2008) Some perspectives on the use of cheese as a food ingredient. Dairy Science and Technology88(4–5): 573–594.
36.
LuceyJAFoxPF (1993) Importance of calcium and phosphate in cheese manufacture: A review. Journal of Dairy Science76(6): 1714–1724.
37.
MacFieHBratchellNGreenhoffKVallisLV (1989) Designs to balance the effect of order of presentation and first-order carry-over effects in hall tests. Journal of Sensory Studies4(2): 129–148.
38.
McSweeneyPLH (1997) The flavour of milk and dairy products: III. Cheese: Taste. International Journal of Dairy Technology50(4): 123–128.
39.
McSweeneyPLH (2004) Biochemistry of cheese ripening. International Journal of Dairy Technology57(2–3): 127–144.
40.
McSweeneyPLHSousaM (2000) Biochemical pathways for the production of flavour compounds in cheeses during ripening: A review. Lait80(3): 293–324.
41.
MolimardPLesschaeveIBouvierIVassalLSchlichPIssanchouSSpinlerHE (1994) Amertume et fractions azotées de fromages à pâte molle de type camembert : rôle de l’association de Penicillium camemberti avec Geotrichum candidum. Lait74(5): 361–374.
42.
MolimardPSpinnlerHE (1996) Review: Compounds involved in the flavor of surface mold-ripened cheeses: Origins and properties. Journal of Dairy Science79(2): 169–184.
43.
PaulsonBMMcmahonDJObergCJ (1998) Influence of sodium chloride on appearance, functionality, and protein arrangements in nonfat Mozzarella cheese. Journal of Dairy Science81(8): 2053–2064.
44.
PhanVAYvenCLawrenceGChabanetCReparetJMSallesC (2008) In vivo sodium release related to salty perception during eating model cheeses of different textures. International Dairy Journal18(9): 956–963.
45.
PrietoBFrancoIFresnoJMBernardoACarballoJ (2000) Picon Bejes-Tresviso blue cheese: an overall biochemical survey throughout the ripening process. International Dairy Journal10(3): 159–167.
46.
Reparet J. (2000). Les propriétés fonctionnelles évaluées à chaud : des fromages aux imitations fromagères. PhD Thesis. Institut National Agronomique Paris-Grignon. France.
47.
RétiveauAChambersDHEsteveE (2005) Developing a lexicon for the flavor description of French cheeses. Food Quality and Preference16(6): 517–527.
48.
RichouxRRosetaGFamelartMHKerjeanJR (2001) Diversité de quelques propriétés fonctionnelles à chaud de l ’Emmental français. Lait81(4): 547–559.
49.
RowneyMKRoupasPHickeyMWEverettDW (2003) The effect of compression, stretching, and cooking temperature on free oil formation in Mozzarella curd. Journal of Dairy Science86(2): 449–456.
50.
RudanMABarbanoDMYunJJKindstedtPS (1999) Effect of fat reduction on chemical composition, proteolysis, functionality, and yield of Mozzarella cheese. Journal of Dairy Science82(4): 661–672.
51.
RueggMEberhardPPopplewellLPeledM (1991) Melting properties of cheese. Bulletin International Dairy Federation268: 36–43.
52.
SabléSCottenceauG (1999) Current knowledge of soft cheeses flavor and related compounds. Journal of Agricultural and Food Chemistry47(12): 4825–4836.
53.
Sadat-MekmeneLRichouxRAubert-FrogeraisLMadecMNCorreCPiotMJardinJLe FeunteunSLortalSGagnaireV (2013) Lactobacillus helveticus as a tool to change proteolysis and functionality in Swiss-type cheeses. Journal of Dairy Science96(3): 1455–1470.
