Effect of partial substitution of wheat flour by quinoa ( Chenopodium quinoa Willd.) and tarwi ( Lupinus mutabilis Sweet) flours on dough and bread quality
Restricted accessResearch articleFirst published online 2022
Effect of partial substitution of wheat flour by quinoa ( Chenopodium quinoa Willd.) and tarwi ( Lupinus mutabilis Sweet) flours on dough and bread quality
Bread is the main important food product worldwide. In this study, eleven bread formulations were developed by partial substitution of wheat flour with quinoa and tarwi flours, to evaluate the effect on the rheological and pasting properties of mixtures, as well as on the physicochemical and textural properties of the final product. Partial substitution with quinoa flour generated similar thermomechanical and textural properties in the dough, and similar bread technological characteristics related to the control bread (100% wheat). In the case of tarwi, the increase in the concentration of this legume showed a negative effect on the bread quality parameters (specific volume, crumb porosity, textural properties, etc.). A negative technological impact of high percentages of wheat flour substitution by the mixture of both Andean flours was found, but it was contrasted with a positive effect on nutritional quality, particularly evidenced by a high content of proteins and dietary fiber. An optimal formulation considering technological and nutritional quality was obtained, presenting the maximum analyzed substitution level (13.35% quinoa flour and 6.65% tarwi flour). This study showed that these Andean grains are suitable for developing bread of good technological quality and improved nutritional profile, adding value to these underused ancestral flours.
AACC (2000) Approved Methods of the American Association of Cereal Chemists. APPROVED METHODS v. 1-2.
2.
Alvarez-JubeteLArendtEKGallagherE (2009) Nutritive value and chemical composition of pseudocereals as gluten-free ingredients. International Journal of Food Sciences and Nutrition60(4): 240–257.
3.
ArmeroECollarC (1997) Texture properties of formulated wheat doughs. Relationships with dough and bread technological quality. Zeitschrift für Lebensmitteluntersuchung und -Forschung A204(2): 136–145.
4.
ArpCGCorreaMJFerreroC (2018) High-Amylose resistant starch as a functional ingredient in breads: A technological and microstructural approach. Food and Bioprocess Technology11(12): 2182–2193.
5.
Ballester-SánchezJYalcinEFernández-EspinarMT, et al. (2019) Rheological and thermal properties of royal quinoa and wheat flour blends for breadmaking. European Food Research and Technology245(8): 1571–1582.
6.
BallesterDZacaríasIGarcíaE, et al. (1984) Baking studies and nutritional value of bread supplemented with full-fat sweet lupine flour (L. albus cv Multolupa). Journal of Food Science49(1): 14–16.
7.
BartkieneEJuodeikieneGVidmantieneD, et al. (2011) Nutritional and quality aspects of wheat sourdough bread using L. luteus and L. angustifolius flours fermented by Pedioccocus acidilactici. International Journal of Food Science & Technology46(8): 1724–1733.
8.
ChauhanGSZillmanRREskinNAM (1992) Dough mixing and breadmaking properties of quinoa-wheat flour blends. International Journal of Food Science & Technology27(6): 701–705.
9.
CodinăGGMironeasaSMironeasaC, et al. (2012) Wheat flour dough Alveograph characteristics predicted by Mixolab regression models. Journal of the Science of Food and Agriculture92(3): 638–644.
10.
Córdova-RamosJSGlorio-PauletPCamarenaF, et al. (2020) Andean lupin (Lupinus mutabilis sweet): Processing effects on chemical composition, heat damage, and in vitro protein digestibility. Cereal Chemistry97(4): 827–835.
11.
CorreaMJAñónMCPérezGT, et al. (2010) Effect of modified celluloses on dough rheology and microstructure. Food Research International43(3): 780–787.
12.
CoțovanuIBatariucAMironeasaS (2020) Characterization of quinoa seeds milling fractions and their effect on the rheological properties of wheat flour dough. Applied Sciences10(20): 7225.
13.
CurtiCACurtiRNBoniniN, et al. (2018) Changes in the fatty acid composition in bitter Lupinus species depend on the debittering process. Food Chemistry263: 151–154.
14.
DervasGDoxastakisGHadjisavva-ZinoviadiS, et al. (1999) Lupin flour addition to wheat flour doughs and effect on rheological properties. Food Chemistry66(1): 67–73.
15.
DeshpandeSSRangnekarPDSatheSK, et al. (1983) Functional properties of wheat-bean composite flours. Journal of Food Science48(6): 1659–1662.
16.
Encina-ZeladaCRCadavezVTeixeiraJA, et al. (2019) Optimization of quality properties of gluten-free bread by a mixture design of xanthan, guar, and hydroxypropyl methyl cellulose gums. Foods (Basel, Switzerland)8(5): 156.
17.
European Commission (2012) Commission regulation (EU) No1047/2012. Official Journal of the European Union310: 36–37.
18.
FennDLukowOMHumphreysG, et al. (2010) Wheat-Legume composite flour quality. International Journal of Food Properties13(2): 381–393.
19.
GostinAI (2019) Effects of substituting refined wheat flour with wholemeal and quinoa flour on the technological and sensory characteristics of salt-reduced breads. LWT - Food Science and Technology114: 108412.
20.
GrossRKochFMalagaI, et al. (1989) Chemical composition and protein quality of some local Andean food sources. Food Chemistry34(1): 25–34.
21.
Güemes-VeraNArciniega-Ruiz EsperzaODávila-OrtizG (2004) Structural analysis of the Lupinus mutabilis seed, its flour, concentrate, and isolate as well as their behavior when mixed with wheat flour. LWT - Food Science and Technology37(3): 283–290.
22.
JiYZhuKZhouH, et al. (2010) Study of the retrogradation behaviour of rice cake using rapid visco analyser, Fourier transform infrared spectroscopy and X-ray analysis. International Journal of Food Science & Technology45(5): 871–876.
23.
LópezEPGoldnerMC (2015) Influence of storage time for the acceptability of bread formulated with lupine protein isolate and added brea gum. LWT - Food Science and Technology64(2): 1171–1178.
24.
LorenzKCoulterL (1991) Quinoa flour in baked products. Plant Foods for Human Nutrition41(3): 213–223.
25.
Martínez-CerveraSSanzTSalvadorA, et al. (2012) Rheological, textural and sensorial properties of low-sucrose muffins reformulated with sucralose/polydextrose. LWT - Food Science and Technology45(2): 213–220.
26.
McwattersKHPhillipsRDWalkerSL, et al. (2004) Baking performance and consumer acceptability of raw and extruded cowpea flour breads. Journal of Food Quality27(5): 337–351.
27.
Mohamed AhmedIAAl JuhaimiFÖzcanMM (2021) Insights into the nutritional value and bioactive properties of quinoa (Chenopodium quinoa): Past, present and future prospective. International Journal of Food Science & Technology56(8): 3726–3741.
28.
Mohd JusohYMChinNLYusofYA, et al. (2009) Bread crust thickness measurement using digital imaging and L a b colour system. Journal of Food Engineering94(3): 366–371.
29.
MoritaNHirataCParkSH, et al. (2001) Quinoa flour as a new foodstuff for improving dough and bread. Journal of Applied Glycoscience48(3): 263–270.
30.
NgCYWangM (2021) The functional ingredients of quinoa (Chenopodium quinoa) and physiological effects of consuming quinoa: A review. Food Frontiers2(3): 329–356.
31.
Repo-Carrasco-ValenciaRHellströmJKPihlavaJM, et al. (2010) Flavonoids and other phenolic compounds in Andean indigenous grains: Quinoa (Chenopodium quinoa), kañiwa (Chenopodium pallidicaule) and kiwicha (Amaranthus caudatus). Food Chemistry120(1): 128–133.
32.
Repo-Carrasco-ValenciaRVidaurre-RuizJLuna-MercadoGI (2020) Development of gluten-free breads using andean native grains quinoa, Kañiwa, Kiwicha and Tarwi. Proceedings53(1): 15.
33.
Rodriguez-SandovalESandovalGCortes-RodríguezM (2012) Effect of quinoa and potato flours on the thermomechanical and breadmaking properties of wheat flour. Brazilian Journal of Chemical Engineering29(3): 503–510.
34.
Romero-EspinozaAMSerna-SaldivarSOVintimilla-AlvarezMC, et al (2020) Effects of fermentation with probiotics on anti-nutritional factors and proximate composition of lupin (Lupinus mutabilis sweet). LWT130: 109658.
35.
RosellCMCollarCHarosM (2007) Assessment of hydrocolloid effects on the thermo-mechanical properties of wheat using the Mixolab. Food Hydrocolloids21(3): 452–462.
36.
RosellCMCortezGRepo-CarrascoR (2009) Breadmaking use of andean crops quinoa, kañiwa, kiwicha, and tarwi. Cereal Chemistry86(4): 386–392.
37.
ShewryP (2019) What is gluten-why is it special?Frontiers in Nutrition6: 101.
38.
StikicRGlamoclijaDDeminM, et al. (2012) Agronomical and nutritional evaluation of quinoa seeds (Chenopodium quinoa Willd.) as an ingredient in bread formulations. Journal of Cereal Science55(2): 132–138.
39.
The European Parliament and the Council of the European Union (2006) Regulation (EC) no 1924/2006 of the European parliament and of the council on nutrition and health claims made on foods. Official Journal of the European Union404: 9–25.
40.
TorbicaAHadnađevMDapčevićT (2010) Rheological, textural and sensory properties of gluten-free bread formulations based on rice and buckwheat flour. Food Hydrocolloids24(6-7): 626–632.
41.
Vega-GálvezAMirandaMVergaraJ, et al. (2010) Nutrition facts and functional potential of quinoa (Chenopodium quinoa willd.), an ancient Andean grain: a review. Journal of the Science of Food and Agriculture90(15): 2541–2547.
42.
Vilcanqui-PérezFChaquilla-QuilcaGSarmiento-CasavilcaVH, et al. (2022) Nutritional, physical and sensory characteristics of bread with the inclusion of germinated basul (Erythrina edulis) flour. Journal of Food Science and Technology59: 2117–2126.
43.
VillacrésEQuelalMBJácomeX, et al (2020) Effect of debittering and solid-state fermentation processes on the nutritional content of lupine (Lupinus mutabilis Sweet). International Journal of Food Science and Technology55(6): 2589–2598.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
